Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/30/2006 4:05:19 PM EST
I want to mount an aimpoint on my Mak-90. It is a chinese norinko Mak-90 Stamped if that matters.

I am not looking to spend alot of the mount, just something that will hold zero, and I would perfer to keep my furniture if I can.

Josh
Link Posted: 1/31/2006 5:26:35 AM EST
Link Posted: 1/31/2006 5:45:03 AM EST

Originally Posted By jcovercash:
I want to mount an aimpoint on my Mak-90. It is a chinese norinko Mak-90 Stamped if that matters.

I am not looking to spend alot of the mount, just something that will hold zero, and I would perfer to keep my furniture if I can.

Josh

Blasphemy
Link Posted: 1/31/2006 9:03:40 AM EST

Originally Posted By RS39:
Does yours have a side rail?
If so the BP-02 Belarussian mount for about $40 and a weaver-type low ring for about $20.



Nope it has no rails at all, i have looked at the malkiv or something or other and its way too much at $200+

Josh
Link Posted: 1/31/2006 10:27:59 AM EST
Link Posted: 1/31/2006 10:59:53 AM EST

Originally Posted By RS39:
$90 Ultimak.

The $40 TDI upper handguard is good (file to fit the long rear tabs to keep it from twisting relative to the lower) but ONLY if the gas tube itself is rock solid (most move a hair).

Now you could have a side rail added to the gun, but that is a perm change to the gun.

A bonus to the Ultimak is that nothing sets the Aimpoint lower, for minimal arc between bbl and dot to work out at varied yardages and the possibility to see irons thru the lower portion of the tube.

I once had a dust cover mount, sold it for $5 shipped, otherwise was going to use it for stirring paint.



what rs39 said. plus, my aimpoint/ultimak combo co-witnesses with the iron sights.
Link Posted: 2/2/2006 9:41:47 AM EST
[Last Edit: 2/2/2006 9:48:26 AM EST by 1-Michigun]
+2 on the UltiMAK & Aimpoint… use the Aimpoint “10818 Extra Wide 30mm Picatinny Ring” if you want to co-witness.







.
Link Posted: 2/2/2006 12:24:24 PM EST

Originally Posted By 1-Michigun:
+2 on the UltiMAK & Aimpoint… use the Aimpoint “10818 Extra Wide 30mm Picatinny Ring” if you want to co-witness.



img.photobucket.com/albums/v733/Michigun/EG/1.jpg



.



Well I guess I will go with the ultimak seems to be the best option, I just hate to loose my beutiful handguards..... I spent alot of time refinishing them :)
Link Posted: 2/2/2006 12:25:11 PM EST
Here is a pic.
Link Posted: 2/4/2006 6:47:25 AM EST
[Last Edit: 2/4/2006 6:49:00 AM EST by einheit13]
you could also consider these. the other scout mount I bought one for my SKS, works pretty good.
Link Posted: 2/8/2006 2:59:25 PM EST

Originally Posted By RS39:
Does yours have a side rail?
If so the BP-02 Belarussian mount for about $40 and a weaver-type low ring for about $20.



does this allow for bottom 1/3 co-witness?
Link Posted: 2/9/2006 2:47:54 AM EST

Originally Posted By freeride21a:

Originally Posted By RS39:
Does yours have a side rail?
If so the BP-02 Belarussian mount for about $40 and a weaver-type low ring for about $20.



does this allow for bottom 1/3 co-witness?



No side rail mount I've ever seen would allow ANY kind of co-witnessing… some do allow you to see your iron sights under or through the mount though, but that isn't co-witnessing of course.
Link Posted: 2/14/2006 7:53:55 AM EST
Top Top