Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/6/2003 5:09:40 PM EST
I just bought a slr101s modded to accept high caps from FAC. Its a awesome rifle i got the one with the green KVAR stock set and it looks amazing. But i am having problems with it accepting some of my mags. It wont lock on about half my mags and is really tight on others. I did a search for posts on this subject because i recall seeing some in the past but i cannot find anything. Should i lightly file the mag release or should i just go through and file all my mags? If i do file the mags what portion should i file? The bottom angled part or the top flat portion.
Link Posted: 6/6/2003 5:32:14 PM EST
I suggest filing the magazines, the angled bottom part. Look at the wear pattern on your mags that fit OK. That kinda shows you were to file. Take it easy on the filing.
Link Posted: 6/6/2003 6:10:07 PM EST
[Last Edit: 6/6/2003 6:10:53 PM EST by HeavyMetal]
Fix the real problem, dont band-aid it by making your mags non-standard.

The mag catch needs a hundreth of an inch or so filed off the top.
Link Posted: 6/6/2003 7:47:16 PM EST
I've had to file adjust the mag release on several AKs.Take your time and test fit frequently,its not an exact science,just don't remove way too much metal from the top edge of the mag release.
Link Posted: 6/7/2003 9:44:26 AM EST
[Last Edit: 6/7/2003 9:48:16 AM EST by Agcsy]
Thanks for all the info guys. My gun now accepts all my mags without problem. My chinese mags still fit a bit tight but now lock. I couldnt find a small enough file so i went at it with a dremel tool. Should i worry about corrosion forming in this area?
Top Top