Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
PSA
Member Login

Site Notices
Posted: 7/2/2015 4:52:55 PM EDT
[Last Edit: 7/2/2015 4:53:18 PM EDT by Sublimeon24s]
Going to get an M92, eventually I will file to make it an SBR but in the meantime I want to make sure I have this right.

If I was to drill (2) holes into the rear of the pistol receiver, install an ACE pignose adapter, a buffer tube, and the shockwave brace this is perfectly fine until I file for an SBR and change out the stock?

If I have the welded muzzle nut or whatever it is removed, and put a brake on in addition to the above, is that ok as well?

Plan on putting the M92 on layaway from Atlantic in a few hours.

Thanks
Link Posted: 7/3/2015 5:53:23 PM EDT
Why waste the money and effort on a fag brace when you can't legally shoulder it? Just waiting the stamp.


Brake install is fine.
Link Posted: 7/17/2015 10:17:35 AM EDT
[Last Edit: 7/17/2015 10:19:48 AM EDT by BobTheGreat]
So long as you have a legal purpose for installing it (such as shooting with an arm brace in the manner it was designed to be used), there should be no issues with the buffer tube.  It is not a stock unless you make it one.

ETA: Note that the ACE adapter will have to be ground down to mate to the back of the receiver.  I think Stormwerkz makes a similar adapter with a smooth face.
Link Posted: 7/17/2015 4:03:53 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 19Charlie_84:
Why waste the money and effort on a fag brace when you can't legally shoulder it? Just waiting the stamp.


Brake install is fine.
View Quote


Crossing state lines or living in a state where SBR stamps are currently in legal limbo (i.e. WA)
Link Posted: 7/17/2015 4:15:46 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By BobTheGreat:
So long as you have a legal purpose for installing it (such as shooting with an arm brace in the manner it was designed to be used), there should be no issues with the buffer tube.  It is not a stock unless you make it one.

ETA: Note that the ACE adapter will have to be ground down to mate to the back of the receiver.  I think Stormwerkz makes a similar adapter with a smooth face.
View Quote



You can purchase an Ace pig nose adapter without the boss...
Link Posted: 7/30/2015 12:26:08 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By mancat:


Crossing state lines or living in a state where SBR stamps are currently in legal limbo (i.e. WA)
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By mancat:
Originally Posted By 19Charlie_84:
Why waste the money and effort on a fag brace when you can't legally shoulder it? Just waiting the stamp.


Brake install is fine.


Crossing state lines or living in a state where SBR stamps are currently in legal limbo (i.e. WA)


Yep, that's why I'm going the brace route, fucking sucks.
Link Posted: 9/4/2015 6:43:33 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Pappadiddypop47:


Yep, that's why I'm going the brace route, fucking sucks.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Pappadiddypop47:
Originally Posted By mancat:
Originally Posted By 19Charlie_84:
Why waste the money and effort on a fag brace when you can't legally shoulder it? Just waiting the stamp.


Brake install is fine.


Crossing state lines or living in a state where SBR stamps are currently in legal limbo (i.e. WA)


Yep, that's why I'm going the brace route, fucking sucks.

That and certain states have certain laws against long guns/rifles being loaded in vehicles but pistols can be.
Top Top