Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 7/1/2018 10:01:29 AM EDT
[Last Edit: 7/1/2018 10:09:27 AM EDT by SenselessPuma]
So I recently picked up a used m92 and I didnt take it apart until I got home yesterday but this is what I found. Both the hammer and tail of the carrier show damage (hammer is much worse). So my question is, should I return it? Or just reprofile the hammer? Or just stick a new tapco or surplus hammer and roll with it?

May add a wolff extra power spring as well. Spring seems a little soft


Thanks for your time.
Link Posted: 7/7/2018 12:23:01 PM EDT
Link Posted: 7/7/2018 2:56:28 PM EDT
I ended up sanding and polishing the hammer and burs back out to see how it runs. The bolt does hang up still on the hammer when pulling the carrier back slowly.

I may end up putting an agl trigger group in it. I've never seen that much damage on a hammer though out of all my aks.
Link Posted: 7/7/2018 3:24:01 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SenselessPuma:
I ended up sanding and polishing the hammer and burs back out to see how it runs. The bolt does hang up still on the hammer when pulling the carrier back slowly.

I may end up putting an agl trigger group in it. I've never seen that much damage on a hammer though out of all my aks.
View Quote
“The bolt does hang up still on the hammer when pulling the carrier back slowly. “
Always does on my m92. Most AKs, too, AFAIK.
Looks like a soft hammer. How would recoil do that?
Top Top