Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/5/2017 10:26:33 AM EDT
I made a thread about this up in the pistols section but it seems there may be more action down here, really hoping to get this figured out. My PAP M85NP is having random failure to extract issues. It will leave the spent case in the chamber, causing the next live round attempting to feed to stovepipe. The casing is not stuck in the chamber, as once I drop the mag and let the stovepiped round fall free, I can pull the spent casing in the chamber out with my finger nail. There is no rhyme or reason as to when it does this. With the same mag and same ammo, it might run flawlessly for a few mags then randomly get said failure. Ive tried multiple mags and brands of ammo all to yield the same results. The gun now has 880 rounds through it between two range trips so Id say I would be beyond any "break in" stage. Since the first range trip when it had the failures, the gun was fully broken down and cleaned (FCG removed as well), the extractor spring was replaced, bolt was fully broken down and cleaned, chamber was lightly polished, carrier rails / bottom of carrier / bolt lugs lightly polished, +15% extra power recoil spring was put in, boiling water poured into gas block port to make sure it dripped out barrel and port was not obstructed.......gun still had the issue the second the range visit yesterday. It works 75% of the time, any ideas here on what I can do to get it 100%?
Link Posted: 3/5/2017 1:53:12 PM EDT
Could you post a picture of the extractor?
Link Posted: 3/5/2017 4:28:26 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By AEnemaBay:
Could you post a picture of the extractor?
View Quote






Link Posted: 3/13/2017 1:47:31 AM EDT
I got your pm, finally had time to check your thread. Mine does the exact same thing. I think it is a weak extractor spring personally. I compared to my other AKs and they all take significant pressure to push them back and forth. My m85 extractor is very easy to move in contrast. My serial is 3398 on mine is your close to it? Maybe a bad batch of them.
Top Top