Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 6/23/2004 5:12:16 AM EST
I thought about ordering a new prebent reciever and a AMD 65 kit from tapco. Besides the barrel extention what else do I need to keep it legal?

Since this will be a "post-ban" I just have to make sure that It doesnt have 2 SAW features right? Also it is legal to "make" a non-working weapon in a working one right?
Link Posted: 6/23/2004 5:50:19 AM EST
Link Posted: 6/25/2004 3:44:03 PM EST
Possible problem re the AMD65 if the AWB expires. By the way I figure it, a functioning folding stock on a semi AMD65 (16.25" extended barrel) would make it less than 26" overall with the stock folded.
Link Posted: 6/25/2004 5:08:15 PM EST
for NFA purposes the 26" minimum is measured with the stock in the open position.

halik
Link Posted: 6/27/2004 10:18:34 AM EST
You don't have to tack the stock. user a 5mmx 20 screw in place of the plunger and IF the ban sunsets you can remove the screw and replace spring & plunger, Just make sure you drill a hole in bottom of receiver so you can get it out
Link Posted: 6/27/2004 12:35:08 PM EST
actaully regular 10-32 screw will work....
Link Posted: 9/15/2004 7:59:45 PM EST
Thanks for the reply. Now that the ban is up I figure it should be much less of a headache to build one of these guns. Actually to build about any "assault" rifle.
Link Posted: 9/15/2004 8:19:27 PM EST
The only thing that changes is you can have the folding stock...

You still need the perminant barrel extension and the 5 US parts, or 5 US parts and build it as a pistol (eg no stock with a block-sling-mount installed in lieu of a stock...
Link Posted: 9/16/2004 4:20:23 PM EST
Don't forget you have to permanently weld on that barrel extension. That means either a pro welding machine or using a MAPP torch and silver solder.
Link Posted: 9/17/2004 9:52:57 AM EST
Link Posted: 9/17/2004 6:42:49 PM EST
I'd double check the laws in your state. In michigan here, they figure the overall length with the stock folded. Maybe the same where you are. I have been trying to find out about the romanian folder for mine. It might just add the extra length you will need for states that fold and measure......
Top Top