Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 9/26/2011 8:49:18 PM EST
I've seen posts on here before about some sort of small piece of rail that bolts to the barrel I think?

I want to mount a light on my WASR, but I want to keep all the stock furniture... Thanks.
Link Posted: 9/27/2011 1:35:36 AM EST
Link Posted: 9/27/2011 1:19:16 PM EST
Thanks!

Do you have one, and if so do you like it?
Link Posted: 9/27/2011 1:42:13 PM EST
[Last Edit: 9/27/2011 2:01:35 PM EST by Liquidmetal]
TX-Zen has one and did a review here and some others posted their experiences as well.

He might have posted the same review over here as well but I'm not sure.

Perhaps he'll chime in.
Link Posted: 9/27/2011 1:55:45 PM EST
why dont you get a cheap shotgun magazine tube clamp and bolt that onto the gas tube?
Link Posted: 9/27/2011 1:57:43 PM EST
I have about 3 bucks into this absent the G2. Generic barrel clamp from Ebay, and Weaver offset ring from the parts bin.







Link Posted: 9/27/2011 10:37:36 PM EST
[Last Edit: 9/27/2011 10:38:20 PM EST by OKIEredneck]
Seen this on a Larry Vickers video. Was thinking about it for one of mine.

http://www.vltor.com/scount-mount-ocg.htm
Its at the bottom of the page.

Heres the video.

http://www.youtube.com/watch?v=ACcrtrFgDE8

Thanks
Link Posted: 9/29/2011 10:19:15 AM EST
Duct tape!

GREEN Duct Tape
Link Posted: 9/29/2011 10:27:10 AM EST
You should enter the contest below where you can get the complete mount and more.
http:////www.ar15.com/forums/t_1_5/1234866_PAKI_MADE_TAPE_GIVE_AWAY_PART_2_____NEW_PRODUCT_PICS_PAGE_1______.html

Link Posted: 9/29/2011 2:44:02 PM EST

Originally Posted By OKIEredneck:
Seen this on a Larry Vickers video. Was thinking about it for one of mine.

http://www.vltor.com/scount-mount-ocg.htm
Its at the bottom of the page.

Heres the video.

http://www.youtube.com/watch?v=ACcrtrFgDE8

Thanks


He has that Vltor mount attached to an Ultimak railed gas tube, which replaces the upper handguard, which the OP doesn't want to do.

Link Posted: 9/29/2011 4:26:58 PM EST
[Last Edit: 9/29/2011 4:45:01 PM EST by TX-Zen]
I've got the DBMG mount and really like it. Solid and well made, not heavy either.




(actually I run the X300 on the side not the bottom, sling gets in the way on the bottom. Someone wanted a pic of the light that way though)


Z
Link Posted: 9/30/2011 6:46:01 AM EST
Get yourself a Surefire 660. It's a universal weapon light that will mount on just about any rifle barrel (you might have to loose the cleaning rod). It's not the coolest lighting system available but it will fit just about anything and they can be found relatively cheap on E(vil)Bay these days.

Link Posted: 9/30/2011 10:54:12 AM EST
Use duct tape!

Link Posted: 9/30/2011 5:30:31 PM EST
Along the lines of the duct tape, I took a piece of bicycle inner tube and stretched it to fit the light onto the left side of the handguards but forward enough that I could get a grip and use support thumb to control the light. It was ROCK solid. I had to cut it off with pocketknife . I now keep a half dozen 2" sections of tubing in the rifle bag.

You will need ultra man strength to get the tube over the handguard and light.
Top Top