Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 9/27/2005 6:26:41 AM EDT
So I think I may have made an oops. I have the barrel and trunnion riveted on a OOW receiver, but don't know how to finish the inside of the receiver. Is there any thing I can do at this point? Could I parkerize the whole assembly or would that screw up the inside of the barrel? Bake on Paint?
Link Posted: 9/27/2005 8:03:16 AM EDT
plug the barrel with plastic stoppers and spray it down with K-Phos from a spray bottle, let it drip dry.....follow with gunkote, duracoat, molyresin etc

Link Posted: 9/27/2005 8:24:05 AM EDT
Parkerize would be the best way.

Then just keep the inside oiled.
Link Posted: 9/27/2005 8:25:48 AM EDT
What is the accepted method? Can't you park a gun with the barrel still in it?

Should you park the parts (reciever, trunnions, barrel, trigger gaurd) before they're assembled?
Link Posted: 9/27/2005 8:30:50 AM EDT
Clean the receiver with brake cleaner, then spray the inside with black paint, then bake for 1hr on 300deg.

Link Posted: 9/27/2005 8:32:50 AM EDT
I'm pretty sure real AKs get finished after the trunnions are installed. They're usually (always?) bare where the trunnion meets the receiver. Not sure about the barrel being in it, but as someone else said you could plug it up.
Link Posted: 9/27/2005 8:35:06 AM EDT
Can anybody tell me what K-phos is? I have access to a lot of Metal Finishing chemicals. Is it a room temperature salt treatment?
Link Posted: 9/27/2005 9:40:11 AM EDT
[Last Edit: 9/27/2005 9:41:37 AM EDT by 1Gunner]
K-Phos is the pretreatment AK gunsmiths use on thier guncoat finishes

www.cleenboreusa.com/kg/kggunkote.asp

www.kgcoatings.com/
Top Top