Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/19/2017 7:27:10 PM
Posted: 1/6/2006 12:50:36 PM EDT
[Last Edit: 1/6/2006 2:47:13 PM EDT by rogue007]
The build has finished, almost.


I am checking function when, I charge the handle letting the bolt ride the bullet into the chamber.....it wont close all the way.


It functions flawless without a bullet, and the bolt locks into place, but with a bullet chambered it wont lock.

I can use a punch to set it further down,into the locked position but it doesnt want to open up freely.


I remember someone having the same problem, searched, cant find anything.


point me in the right direction or help me troubleshoot this one please.




btw.............it is a M92 Yugo Krink chambered in 7.62x39
Link Posted: 1/6/2006 2:26:37 PM EDT

Originally Posted By rogue007:
The build has finished, almost.


I am checking function when, I charge the handle letting the bolt ride the bullet into the chamber.....it wont close all the way.


It functions flawless without a bullet, and the bolt locks into place, but with a bullet chambered it wont lock.

I can use a punch to set it further down,into the locked position but it doesnt want to open up freely.


I remember someone having the same problem, searched, cant find anything.


point me in the right direction or help me troubleshoot this one please.



btw.............it is a M92 Yugo Krink chambered in 7.62x39




Sounds like you didn't check the headspace properly.
Link Posted: 1/6/2006 2:40:51 PM EDT
fixed it........................



simple, had a little roll on the chamber when pressing in the bbl (filed it down) and also had a couple of shavings inside
th chamber not letting the bullet go all the way inside.


its fixed................
Link Posted: 1/6/2006 3:04:41 PM EDT
where are you in TX?
Link Posted: 1/7/2006 1:27:13 PM EDT
outside Mckinney
Top Top