Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/24/2017 4:44:23 PM
11/22/2017 10:05:29 PM
Posted: 10/4/2004 6:09:21 PM EST
[Last Edit: 10/4/2004 7:46:51 PM EST by Ripcode]
I cut the weld and was finally able to get the muzzle nut off my Romak-1 tonight.

Only to find out the barrel is turned way down and the muzzle nut was pressed on!

So I'm thinking maybe a new barrel assembly. The pic at Century Arms shows the barrel assembly is complete with a muzzle nut and it's supposed to be new.

K-Var has bare barrels.

Any one?
Link Posted: 10/4/2004 6:14:16 PM EST

Originally Posted By Ripcode:
I cut the weld and was finally able to get the muzzle nut off my Romak-1 tonight.

Only to find out the barrel is turned way down and the muzzle nut was pressed on!

So I'm thinking maybe a new barrel assembly. The pic at Century Arms shows one the barrel assembly is complete with a muzzle nut and it's supposed to be new.

Any one?



Well, AK barrels are also pressed on, so that's a little bit of a PITA to change...
Link Posted: 10/4/2004 6:17:15 PM EST
[Last Edit: 10/4/2004 6:18:19 PM EST by Ripcode]
Since the barrel end is turned way down, I can't thread it. That is why I am thinking another barrel.

I have a smith lined up for the barrel swap. I'm not going to do that, I don't have the tools.
Link Posted: 10/4/2004 6:19:53 PM EST
Is it turned so far that 1/2x28 won't work? There are adaptors 1/2x28-->14x1
Link Posted: 10/4/2004 6:52:41 PM EST
[Last Edit: 10/4/2004 7:30:37 PM EST by Ripcode]
I'd rather not go the adapter route. Call me picky.

Link Posted: 10/5/2004 4:14:04 AM EST
If threading is the objective, don't get the ones from century...They are WASR-10 assemblies, and have a pressed on muzzle nut covering a turned down barrel.

-David.
Link Posted: 10/5/2004 4:21:28 AM EST
Link Posted: 10/5/2004 5:44:06 AM EST

Originally Posted By RS39:

Originally Posted By Ripcode:
I'd rather not go the adapter route. Call me picky.




So you don't want to sleeve it and get a front sight base with a threaded end?



No. I want this one to look like a plain old AIM. I want the option of the slant brake or muzzle nut.



Top Top