Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/29/2005 2:13:09 PM EST
Or alternatively, what receiver would be the best starting point ? I have the drawings, it doesn't look too tough, just kinda precise -
Link Posted: 12/29/2005 9:08:12 PM EST
ORF was selling some Ohio ordnance receivers with the cuts already made, you had to pay more of course, i dont know if their offering that receiver anymore. I was nervous when i did mine, it was my second build, but when i called the local ak gunsmith and had him quote me a 100 bucks to install the trunnion and the catch i decided to do it on my own. I used the templates and drawings off of pookies site and just went slow and measured everything two to three times before i cut. The only thing i messed up on was the degree of angle on the rear of the receiver, i did it by eye and it came out to about 4 degrees and it should be cut at 6, all in all it came out real nice and i wouldnt hesitate to do another. McM

Link Posted: 12/30/2005 1:35:27 PM EST

You work encourages me to go ahead and do mine myself. Thanks

Link Posted: 12/30/2005 4:40:15 PM EST
AK-Builder offered them untill his supplier dried up. I just missed getting one. I did manage to get one of his underfolder flats, nicely done. I'm waiting to see if the side folders will be offered again. Should probubly start a thread on a few other boards to see what shakes out of the tree.
Link Posted: 12/30/2005 6:49:55 PM EST
[Last Edit: 12/30/2005 6:50:52 PM EST by cruzie27]
heres the AK-74 kit i built,shown on the bottom....its just like the AK-100 series,..not to hard to do,. take your time.
i am also building a AK-104 and a bulgy krinkov (AKS-74U) once i get the SBR paperwork back.

like said before pookies site is a nice little gem of info.

and take your time!!!

i forgot,.. it was built on a global 1.0mm revicer,...and all of the rest of my kits are going to be built on global recivers
Link Posted: 1/3/2006 11:53:08 AM EST
[Last Edit: 1/3/2006 5:13:49 PM EST by offroader333]
anyone have a link to the pookie site?-------thanks, nate7
Link Posted: 1/3/2006 1:48:49 PM EST
Top Top