Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
11/20/2019 5:07:11 PM
Posted: 4/18/2006 12:00:06 PM EST
On my Yugo underfolder rivet kit form MRKrink (thanks) I have two long rivets. One for the rear trunnion and one for the bottom of the front trunnion.

Do I need one of these for my center support?

or can I just get another cheap rivet and use something else as the sleeve that does not cost me almost 16 bucks?
Link Posted: 4/18/2006 3:53:00 PM EST
i heat-treated a short piece of steel brake line in a couple of mine. works fine, and if you ask your mechanic for a couple inches of brake line, he'll probably just give it to you for nothing.
Link Posted: 4/18/2006 4:08:06 PM EST
I've welded in a piece of 1/4" steel rod on one of my builds. Anything steel and 1/4" diameter will work.
Link Posted: 4/19/2006 3:54:38 AM EST
Just remember that whatever you use, the head that portrudes out the passenger side needs to be small enough that the selector clears it.

Personally I like the www.ak-builder.com center supports that you have pictured. The Tapco and other ones do not have the notch for the bolt to clear and are too long.

FWIW
Top Top