Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/26/2003 3:00:38 AM EST
Anybody know how much parts commonality there is/ain't between a Daewoo and an AR?

Any Daewoo board(s) out there?

Thanks, all.

SD
Link Posted: 11/26/2003 3:10:50 AM EST
Link Posted: 11/26/2003 3:22:40 AM EST
Link Posted: 11/26/2003 4:46:07 AM EST
Campy, does your friend make firing pins too?
Link Posted: 11/26/2003 4:54:53 AM EST
Link Posted: 11/26/2003 7:01:20 AM EST
Campy:

Are those bolts and firing pins your friend manufactures in fact "US Parts" for parts count purposes?

Thanks much.

SD
Link Posted: 11/26/2003 9:21:17 AM EST
what's the barrel length on the DR-200's? I thought they were 16" but I just read they are 18.3". Is that correct?
Link Posted: 11/26/2003 10:28:25 AM EST
Link Posted: 11/26/2003 11:40:32 AM EST
Campybob

Im interested in parts.

Can I have more information?

What all does he make besides bolts and firing pins?

FYI
The entire Fire Controll Group is interchangable with an AR15. I have installed a new bushmaster FCG in my DAEWOO and it went in without a hitch. I still have NOT fired the rifle.

Also, the cam pin is an AR15 swapable part as is the cotter pin, the extractor, extractor spring, the ejector spring, I think the extractor, but it may be longer now that I think about it... hmm what else... Magazine drop assembly and... ???? Cant think of anything else. Sights are A1 of course.

Link Posted: 11/26/2003 1:53:25 PM EST
Yes the entire fcg is the same as an ar15.

Campy i would be very interested in the parts for the dr200. How much for the bolts?
Link Posted: 11/26/2003 2:30:16 PM EST
Top Top