Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 1/3/2006 8:07:45 PM EDT
I will be working on my very first AK and AK build in a few months provided a few things get ironed out. I'll be using a DCI Yugo underfolder receiver. Can I use say a Polish underfolder kit with it? Is there anything else in particular with Yugo's or DCI that I should pay attention to? Thanks.
Link Posted: 1/3/2006 9:06:00 PM EDT
The Polish trunion, rear block and pistol grip screw lug will not fit with a DCI Yugo M70 receivers. To assemble a Polish underfolder kit, you need an AKM receiver.

Harlan
Link Posted: 1/3/2006 9:50:09 PM EDT
how about a romy rpk front end on the yugo m70 reciever with a yugo fixed stock rear end?
Link Posted: 1/4/2006 12:42:23 PM EDT
[Last Edit: 1/4/2006 12:44:03 PM EDT by omega53513]
Yugo receivers are also shorter than regular RPK receiver. So if DCI is making those Yugo receivers to the original specification then you would also need to shorten the top cover(if top cover is romanian - but if top cover is Yugo then it should be OK).
good luck.
Link Posted: 1/4/2006 5:05:39 PM EDT

Originally Posted By occaar:
how about a romy rpk front end on the yugo m70 reciever with a yugo fixed stock rear end?



You will have to rework the upper rails of the receiver to fit the Romanian trunion. The specs for the upper rails between the Yugo M70 receiver and the Romanian RPK receiver are slightly different.
Top Top