Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 4/18/2007 4:05:21 PM EST
Has anybody used them? How are they? Problems?  Thanks in advance
Link Posted: 4/19/2007 6:24:56 AM EST
need mo info.

100% receivers? NDS-3 receivers are da bomb.  I just noticed there is a recommendation to not use the Tapco G2 single hook trigger with them.  I don't know why, mine works fine with the G2 (after I installed the disconnector spring).  

80% bent receivers? I dunno.

Link Posted: 4/20/2007 2:59:39 PM EST
If you are going to build more than 2 or 3. Bending them yourself is the way to go. Its not that hard. You dont have all the FFL hassle. And after number 2 or 3 the jig has paid for itself. Expecially if you buy my receiver jig on equiptmen exchange board
Link Posted: 4/20/2007 7:18:52 PM EST
I have not used the Bentmetal but I have used the ColdSteel ones several times and am happy with the quality. The ColdSteels have all the stampings in them. all you need to finish them is a Dremel tool, some files, a drill motor or drill press and drills/reams. Much cheeper than a bending jig and press, But each-to-his-own.
Remember you do have to weld in the lower rails and harden them also.
Top Top