Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Page AK-47 » Krinkov
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 9/12/2005 9:34:37 AM EDT
[Last Edit: 9/22/2005 11:36:43 PM EDT by rbthntr64]
My M92 with a barrel extension from Ak-Builder
http://www.hunt101.com/img/323316.jpg
Link Posted: 9/13/2005 10:08:37 PM EDT
that is beautiful and evil at same time hreaded3.How about AMD-65 (tapco and some other flash hiders does not look too good imho)
Link Posted: 9/13/2005 10:50:44 PM EDT
[Last Edit: 9/22/2005 11:38:45 PM EDT by rbthntr64]
now some Answers:

?
Link Posted: 9/14/2005 12:25:48 AM EDT
Thank you for your answer. I love design but price might be too hot for me.
Link Posted: 9/18/2005 12:44:10 PM EDT
not trashing your thread just letting you know what your up against

msg sells a ext that looks really close to what you have for $60 ?
and nashnash sells a really nice threaded fake can for 80-100
so your prices would have to drop atleast by 50% for you to sell any
Link Posted: 9/21/2005 10:20:33 AM EDT
[Last Edit: 9/22/2005 11:39:40 PM EDT by rbthntr64]
Deleted
Link Posted: 9/21/2005 11:42:52 AM EDT
Well then...

I guess everybody had better buy yours...

... OR ELSE!

Link Posted: 9/21/2005 5:54:56 PM EDT
Link Posted: 9/22/2005 12:42:32 AM EDT
[Last Edit: 9/22/2005 11:47:43 PM EDT by rbthntr64]
I was hoping there would be some input other than what I have flamed with. If Curtis' price is too high, then by all means get the one from the other guy. I never said anything about having to buy Curt's because it is better. It is just another accessory for those that are interested. If you are not, thats cool with me.
I have deleted all the answers because I feel that by giving the info, Krinkfreak believes that I should pay to show a potential new product (not released yet) to get input from the consumer on ideas of what you want in a product. I do not have a business. I am merely a friend of Curtis' trying to help him out. If you don't want to see what is new and upcoming, just let me know and I will not post it here.
Link Posted: 9/22/2005 9:31:11 PM EDT

msg sells a ext that looks really close to what you have for $60 ?
and nashnash sells a really nice threaded fake can for 80-100



some links please
Link Posted: 9/22/2005 11:27:24 PM EDT
Another thing that I have noticed is some of the "barrel Extensions" that are available are solely Aluminum. The method used to affix them is merely a blind pin.
The BATFTB approved methods are by welding, Welded blind pin, or silver soldered with 1100 degree silver solder.
My concern is that the aluminum extensions that are not welded may become an issue of unwanted attention to the uninformed. If they are welded after being pined, its a non-issue. But if not. Hmmmm. I don't think that I would want to be in that position.
Link Posted: 9/23/2005 11:26:23 AM EDT
rbthntr64,
I have some advice for you whether you want to heed it or not.

First you need some thicker skin.

Second, when you jump into a board as a new member you are expected to... keep a low profile for a while. You came off with an attitude right away and nothing will piss people off faster around here.

That can looks nice but you need to be able to take commentary and criticism and suggestions from board members without throwing a hissy or you really have no business trying to sell something.

My .02
Link Posted: 9/23/2005 4:02:55 PM EDT
Thekater,
I did not have an attitude. I was asked to sell an item for half of what it is worth. I responded to justify the cost. Nothing more and nothing less. Commentary and critisism is welcome but telling me to give it away is something else entirely. I am a member at several other boards and have never been flamed as bad as I have here. New members should be welcomed not flamed. It takes new members to keep these boards running. Running them off will only cost you in the long run.
MY .02
Link Posted: 9/25/2005 7:21:03 AM EDT
ok heres my .02
the guys product is good alot better in design and quality than other cans out there. you might not tell from the pic but in talking to him you will find out it is. So he wants more for his product but there is alot more work involved than others. better design+more parts=more time=more money.
thats what i feel anyway
Link Posted: 9/26/2005 8:23:23 PM EDT
is tihollow or solid?
Link Posted: 9/26/2005 11:16:00 PM EDT
[Last Edit: 9/26/2005 11:17:56 PM EDT by socandyman]
i wasnt flaming you and i said that at the beginning of my post was just
givin my input (what you asked for )
and i wasnt telling you to to "give them away"
was just saying everyone else is cheaper

my .02 the alum can nashnash makes looks the best

Link Posted: 9/27/2005 3:38:00 PM EDT
It also looks nice. You say it is aluminum. How is it permanently attached? Do you have a link for him? How much are they and are they available now?
Page AK-47 » Krinkov
Top Top