Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/27/2004 2:39:34 PM EST
There was some information posted about AK series Barrel Diameters.....but when I do a "search" I can only go back 30-days. Does anyone have this information?..or know where it can be located. I mostly need to find out if AKM and AK-74 trunions are of the same for pressing in barrels...or if they are different between 7.62x39mm trunions and 5.45x39.5mm trunions and barrel OD.

Thanks, RichardS.
Link Posted: 8/30/2004 10:29:08 AM EST
So who would have information on barrel-diameters, and if AKM and AK-74 trunions are the same sizes?
Thanks, RichardS.
Link Posted: 8/30/2004 1:48:18 PM EST
http://www.ar15.com/forums/topic.html?b=4&f=51&t=53837
Is this what you're looking for? If so, it's found in the Builders section under links for builders.
Link Posted: 8/30/2004 3:45:50 PM EST
Link Posted: 8/31/2004 5:53:36 AM EST
Great link Campy! One question, have you ever purchased from them? TIA.
Link Posted: 9/2/2004 6:00:50 AM EST
Be carefull of aa-ok's info. It is not exact. I had a post of barrel diameters but I don't know where it is any more. I will try to update it and post it again.

Most 74 trunions have a 22mm hole for the barrel, while all AKM's that I know of have a 23mm barrel hole. Rommy 74's use a 23mm barrel hole.

Hope this helps.

Brick
Link Posted: 9/2/2004 11:07:27 AM EST
[Last Edit: 9/2/2004 11:10:47 AM EST by CAMPYBOB]
Link Posted: 9/2/2004 11:08:39 AM EST
Top Top