Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/31/2005 3:08:27 PM EST
THE BOLT CARRIER HANGS ON THE HAMMER WHEN CYCLEING FORWARD. I REMEMBER AN OLD POST WHERE SOMEONE GROUND SOME MATERIAL OFF OF THE HAMMER TO CORRECT THE PROBLEM. SHOULD I DO THIS? ANY OTHER IDEAS? THANKS
Link Posted: 12/31/2005 3:22:13 PM EST
If it only does it when you ride the carrier forward I wouldn't worry about it. Pull the bolt carrier assembly all the way to the rear and let it fly, it should ride right over the hammer.
Link Posted: 12/31/2005 4:03:58 PM EST
It does it when I let it fly or shoot it. not every time but maybe one in every five.
Link Posted: 1/1/2006 1:06:44 AM EST
buy a us fcg
Link Posted: 1/1/2006 1:10:20 AM EST
did i say that



what i ment to say was buy a us fcg LOL


ok ok get yourself a g2 double hook
if your rec wont take a double hook remove 1 of the hooks
but the double hook holds the hammer alittle lower and will fix your prob
Link Posted: 1/1/2006 3:52:56 AM EST
I have a US g2 fcg. I am going to put some rounds through it today. Maybe it will fix itself. Thanks for everyones help
Link Posted: 1/1/2006 12:51:27 PM EST
i get ask that question alot
and usally its cause someone is trying to use the orig fcg and its alittle bigger

if your already have a g2 your carrier is to tight in the rec
need to do alittle file work
Link Posted: 1/1/2006 2:18:42 PM EST
[Last Edit: 1/1/2006 2:19:17 PM EST by r50maier]
I'd lightly file the rails and polish the hammer. I had to take a little off of the ejector also. This took care of the majority of my problems. After that, a magazine or 2 of ammo will have everything working properly.
Link Posted: 1/1/2006 2:41:36 PM EST
I did some more file work and after 30 rounds everything seems to be working great. thanks for all the help.
Top Top