Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 3/16/2006 10:33:11 AM EDT
I'm looking for an Arsenal Flashider I believe the part number is 133BU it has 24x1.5" threads-it is the flash hider Arsenal shows on their SAM-7A1
any help would be appreicated.
Link Posted: 3/16/2006 11:28:51 AM EDT
try equipment exchange
Link Posted: 3/23/2006 4:15:05 PM EDT
[Last Edit: 3/23/2006 4:17:16 PM EDT by gunney]
Here you go. I contacted blackjackbuffers concerning size. Their website lists it as 22mm. Actually it is 24x1.5mm same as veriforcetactical. Just $10 bucks cheaper. Good Luck. I ordered one. I will let you all know how good they are.

http://www.veriforcetactical.com/gun_accessories/AK47/PRE-BAN%20MUZZLE%20BRAKES/17/


http://www.blackjackbuffers.com/index.php?main_page=index&cPath=76

Link Posted: 3/24/2006 8:09:04 AM EDT
Gunney, do you know if the ones from bj buffer is US made? Thanks
Link Posted: 3/24/2006 12:15:48 PM EDT
Medieval, I think they are Bulgarian. Not 100% sure though. Give em a call.
Link Posted: 3/24/2006 11:06:53 PM EDT
Thanks Gunney, will do.
Link Posted: 3/27/2006 6:43:36 PM EDT
Did you find out if it's Bulgarian made?
Link Posted: 3/27/2006 8:09:04 PM EDT
[Last Edit: 4/5/2006 6:37:53 AM EDT by Bachelor_of_Science]

Originally Posted By Neutrino45:
Did you find out if it's Bulgarian made?



All they say is that it's a "ComBloc" brake. Here's a pic of mine on my SA M-5...(along with my mini-dachshund's paw)

Link Posted: 3/28/2006 1:06:01 PM EDT
Got mine today. It is made in Bulgaria. It's really nice. I bought mine at blackjackbuffers.com. $50.00 and in perfect condition. It also comes with a 14mm adatper. It looks wicked on my Arsenal SLR 105 A1.
Link Posted: 3/28/2006 4:35:02 PM EDT
[Last Edit: 3/28/2006 4:35:58 PM EDT by Neutrino45]
How does one know if it's from Bulgaria or not? Is it by the arsenal marking, comparing it with a known Bulgarian FH, or because the bag it came with says "made in Bulgaria"?

How does it fit? I've read that some of them fit loosely.
Link Posted: 3/28/2006 5:59:58 PM EDT
I just checked my new flash hider and it fits pretty loose. Is this common?
Link Posted: 3/28/2006 7:11:02 PM EDT
It's Chinese not Bulgarian- check your thread over at K-Var, I posted some ways to make it work for you.
Link Posted: 3/29/2006 4:49:02 AM EDT

Originally Posted By Creeper:
It's Chinese not Bulgarian- check your thread over at K-Var, I posted some ways to make it work for you.



Can you please post a link? I don't see it. Thanks!
Link Posted: 3/30/2006 12:17:30 PM EDT
Creeper, It is Not Chinese. Chinese parts were banned from import in '94. It is most likely made somewhere in Eastern Europe; Bulgaria, East Germany, Romania, Czec Republic. Who knows... It might even be Russian. I seriously doubt it is Chinese though. Thanks for your help though. I don't think I want to file it or teflon tape it. I might try some high heat thread lock. Just let it dry on the FH threads before installing so I can remove if I don't like it. I'll have to think about it. Anybody else have any ideas????
Link Posted: 3/30/2006 6:00:11 PM EDT
[Last Edit: 3/30/2006 6:01:58 PM EDT by einheit13]
they are chinese and unless you file them down to jamb against the FSB when the pin catches or use teflon tape they will wobble. Also they aren't 'real' metric in size. The thread pitch is correct but the diameter of the flash hider 'base' is an inch pattern. Mic it and you'll see. The stub for the bayonet ring is also a little out of speck. My bulgy bayo fits fine, but a Polish bayo is extremely tight. They both work fine on the original Bulgy MB and Bulgy FH..........We do imprt goods from China, I have a Norinco shotgun made in 2001.......
Link Posted: 4/5/2006 5:00:56 PM EDT
K-VAR.COM the real Bulgarina Flash Hiders in stock for $39.00. I jus t ordered one. : )
Top Top