Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/13/2010 6:38:58 AM EST
Does anyone know if a "AK74 style" muzzle break can be found for a Chinese Ak in 5.56 ???

Do I have to use the one for the AK's in 7.62x39 ? would it be even effective ?
Link Posted: 9/13/2010 6:41:49 AM EST
[Last Edit: 9/15/2010 4:47:51 AM EST by Stazi]
You can use the same AK-74 brake, but you just need to add the adapter to convert from the 24x1.5 RH threads on the break to 14x1 LH on the barrel.

A la:

Link Posted: 9/13/2010 6:49:23 AM EST
[Last Edit: 9/13/2010 6:57:57 AM EST by Shung]
thx for the info. I will look into that !

So the AK74 muzzle break is wide enough to let a 5.56 through it ?

ETA: no AK74 brake on your website.. Will try to look for it somwhere else.. If you have any link at hand.. ;)

thx again !
Link Posted: 9/13/2010 6:52:56 AM EST
Link Posted: 9/15/2010 4:47:10 AM EST
[Last Edit: 9/15/2010 4:47:30 AM EST by Stazi]
You could always just screw this one straight on - you wouldn't even need the adapter:
Link Posted: 9/15/2010 6:20:53 AM EST
It was meant to be mounted on a 7.62x39 AK...

do you think it would be sufficently efficient on a 5.56 ?
Link Posted: 9/15/2010 10:47:20 AM EST
Yes, the AK74 brakes all have an opening large enough to allow a 7.62 bullet to pass through anyway.
Link Posted: 9/15/2010 1:17:20 PM EST
I see !

thx a lot for the tips !
Top Top