Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/24/2017 4:44:23 PM
11/22/2017 10:05:29 PM
Posted: 9/2/2004 2:13:20 AM EST
Here's a 5mm screw from AA-OK that works perfectly (the screw for the rear tang hole may or may not need to shortened just a hair): www.aa-ok.com/AK_Stocks/stock.html Part# AK-238 & they're $2 each.
Tomac
Link Posted: 9/2/2004 2:28:06 AM EST
I just tried mine out a few days ago took it back off, but yes the screw is too short, I cut it myself though.
Link Posted: 9/2/2004 11:17:57 AM EST
Ace hardware has assorted lengths so you can pick the right ones without the need to cut. The cost about $.30 and no cost for shipping.
Link Posted: 9/2/2004 6:22:36 PM EST

Originally Posted By Mak:
Ace hardware has assorted lengths so you can pick the right ones without the need to cut. The cost about $.30 and no cost for shipping.



Out here in rural Idaho we have 5mm screws of varying lengths but not w/a head that will fit the tang holes properly (sigh...).
Tomac
Top Top