Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/14/2005 1:57:44 PM EST
I have a AMD 63 with the wood grips and I cannot get a 30 round mag in without hitting the front grip is this common?

If not is there an easy fix or does someone have another grip they want to part with I can mod some?

TIA!

Link Posted: 12/14/2005 2:03:48 PM EST
Which way do you have the grip turned?
Link Posted: 12/14/2005 2:07:45 PM EST
[Last Edit: 12/14/2005 2:09:10 PM EST by ozzy_the_nuke]
It has been a while since I took the front grip off of my 63, but I dont remember having problems. But then, I could just be my memory. If I may ask the obvious; Do you correctly have the front grip facing forward like this http://www.ak-47.net/ak47/hesse63.html?

ETA. Grrr Rob beat me to the obvious question.
Link Posted: 12/14/2005 2:44:17 PM EST
the origional AMD 63's were issued with 20 round mags... using one you have plenty of room for removal
Link Posted: 12/14/2005 3:01:34 PM EST
At the end of this vid you can see my son starting to remove a 30 round mag from AMD-63.
media.putfile.com/100_033336
Link Posted: 12/14/2005 3:40:56 PM EST
On my AMD 63 build, just as the mag clears the reciever there's about 1/8" to 1/4" of clearance between it's base and the front grip. In other words.....barely, but yes.
Link Posted: 12/15/2005 1:10:18 PM EST
[Last Edit: 12/15/2005 1:11:19 PM EST by Dr_Zero]
Hmm I posted some pics this morning but they didn't go let me try again








Here is the mark the 30's make when you try to put one in

Its not much to shave off to clear but would rather do it with a spare grip anyone got a wood one they want to get rid of?
Link Posted: 12/15/2005 1:22:08 PM EST
Insert the mag straight in, almost vertically like an AR mag and then rock it the last bit in. I didn't think 30's would fit in my '65 until I tried doing it this way and they went in and came out easily.
Top Top