Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 10/29/2004 1:23:17 AM EST
How does the AMD65 folding stock lock open? I just got a parts kit, and when in the open position it is very loose. Does it need to be mounted to the reciever?
Link Posted: 10/31/2004 1:03:31 PM EST
When you get the parts kit you need to assemble the locking mechanism. It's not hard to do at all. Find the small rectangular metal piece that has a threaded hole in one end. Then you need a screw that has a nice large head, and a spring that fits over the screw.

Put the spring over the screw and insert it into the bottom of the stock on the left hand side. Insert the rectangular locking mechanism in the top and screw in the screw until it's where you want it. The stock should now lock in botht the open and closed position.

This needs to be done before you put the rear trunion into the reciever so that you can cut yout the reciever for the release button.
Link Posted: 11/1/2004 12:46:55 AM EST
Thank you very much. These forums are great, especially when my brain refuses to work. Must send contribution! Thanks again
Top Top