Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 9/4/2005 2:42:05 PM EDT
Hello, I have purchased my first AK, it is a romanian that shoots great but the front sight has to be drifted over to shoot POA, it looks like there is a barrel nut in frt of the sight, my question is can I loosen that nut and turn the sight a little?

Thanks,
Jerry
Link Posted: 9/4/2005 2:46:39 PM EDT
Nope.

You have to drift out the 2 pins holding the fSB in place and then shift the sight. Then redrill the holes just a tad larger and install larger pins.
Link Posted: 9/4/2005 2:56:37 PM EDT
Required reading for a Romanian owner: www.gunsnet.net/Linx310/index.shtml

Welcome to the Dark Side.
Link Posted: 9/4/2005 2:57:40 PM EDT
Get An AK site tool and drift the round drum over to adjust windage. Some people just use a C clamp and a socket to do this. Only adjust your whole site base in worst case senerio when it is canted.
Link Posted: 9/5/2005 3:42:40 PM EDT
Thanks for all the info guys!
Top Top