Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/11/2006 1:56:45 PM EST
i have a mak90 that i have a choate stock, ultimak mount, and an american made red dot on do these count for 3 pieces of 922r compliance? what other items can i easily install to make full compliance?
Link Posted: 2/11/2006 2:16:20 PM EST
I know the red dot isn't a part.
Link Posted: 2/11/2006 2:17:41 PM EST
[Last Edit: 2/11/2006 2:43:11 PM EST by Mak]
No. The MAK-90 does not need compliance parts with a choate stock as that is a thumbhole.

The 922(r) parts compliance has been covered repeatedly.

On an AK the parts most likely used are

US parts usually used for compliance:
pistol grip
front handguards (count as one 1)
fire control group / trigger, hammer, sear(disconnector) (3)
muzzle attachment
mag baseplate
mag follower
mag body

stamped takes 5 or 6 depending on muzzle attachment
milled takes 4 without 5 with muzzle attachment

The 16 countable parts of an AK rifle. No more than 10 of these parts may be imported
(1) Receiver
(2) Barrel
(3) Trunnion
(4) Muzzle attachments(flash hiders, brakes, barrel extensions, barrel nuts)
(5) Bolt
(6) Bolt carrier
(7) Gas piston
(8) Trigger
(9) Hammer
(10) Disconnecter
(11) Buttstock
(12) Pistol grip
(13) Forearm handguards
(14) Magazine body
(15) Follower
(16) Floorplate

The underlined parts are the most commonly available U.S. manufactured parts.
Top Top