Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 10/3/2004 12:25:41 PM EST
1 How hard is it to replace the gas block with a lug so I can put oe wit ha lug on it?
2 What about putting a lug on a AK that has a 74 type mussle brake on it? Thanks again boys!
Link Posted: 10/3/2004 3:55:20 PM EST
Link Posted: 10/3/2004 6:02:07 PM EST
I have a threaded slant brake on it now that I istalled. What about the new 74 brake???
Link Posted: 10/3/2004 6:21:43 PM EST
ISn't the lug on a 74 more forward than on a 47 because of the 74 mussle brake. What do I need to do to put a 74 lug on?
Link Posted: 10/5/2004 4:20:02 AM EST
still need help on this issue!
Link Posted: 10/5/2004 4:41:18 AM EST
What Type of AK are you working on?7.62 or 5.45?
Link Posted: 10/5/2004 5:32:19 AM EST
I need to put on lug on my 47 with a slant brake and a 74 with a 74 type brake.
Link Posted: 10/5/2004 5:44:37 AM EST
Hewey,when you say 47,are you talking about an AK with a milled receiver or are you generalising?The only reason I ask,is because the stamped AKM and the milled AK47 take two different bayonets.
Link Posted: 10/5/2004 8:31:27 AM EST
oh, sorry. it is a stamped ramanian 7.62 akm with a slant brake. The other is the same but 5.54 with a 74 type brake.
Link Posted: 10/5/2004 10:21:47 AM EST
Follow Campys instructions above for the 7.62 Romanian.

The 5.45 will be easier as the bayonet lug is made onto the 74 FSB.You'll need the 22mm Romanian FSB and brake,installation is pretty straight forward in that you're changing out the FSB.
Top Top