Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/8/2003 11:19:15 PM EST
[Last Edit: 11/8/2003 11:19:32 PM EST by JTR8541]

I’m thinking this might be the way to go to get a good solid mount on an AK for an Aimpoint or similar optic. What do ya’ll think?

Does anybody know who does work like this and what kind of rear sight that is on the dust cover?

Best regards, J
Link Posted: 11/8/2003 11:22:04 PM EST
Im pretty sure that was either done at krebs or ak-usa. Its someones custom gun from over at ak.net. I dont remember what it started life as.
Link Posted: 11/8/2003 11:37:26 PM EST
Link Posted: 11/8/2003 11:56:25 PM EST
Didn't ORF post a set-up similar last week or was I enjoying the benefits of Gunsnet membership a wee tad too much?

Link Posted: 11/9/2003 1:19:28 AM EST
How does that rear sight hold its zero on the dust cover, screws in the back?
Link Posted: 11/9/2003 4:09:37 AM EST
Link Posted: 11/9/2003 4:30:04 AM EST
I did this to my personal weapon. The next ones will be welded from the under side.


Link Posted: 11/9/2003 12:31:04 PM EST

I can honestly say, that I have never had to readjust my POI on my 5.56mm Galil after having removed the reciever cover for maintenance.
Link Posted: 11/11/2003 9:56:59 AM EST
[Last Edit: 11/11/2003 9:57:44 AM EST by Lancelot]

The guys that make the Ace rifle stock make one too.


AK Red Dot Scope Mount - AK Scope Mount Short ( AKSMS ) Mounts rigidly to the rear sight base in place of rear sight. Picatinny style rail 3.75" long. Includes M16 rear peep sight, adjustable for windage. "Tunnel" machined into base allows use of iron sights even when a scope is mounted. Allows for the use of AR tritium night sights ( not included ). Weight:

AKSMS: Retail..........$ 94.95

Link Posted: 11/11/2003 1:58:24 PM EST
While i can't say that I really care for that AR stock set up on that AK, the rest of the rifle looks pretty clean and high speed. What sort of muzzle attachment is that on there?

Link Posted: 11/11/2003 4:24:31 PM EST
Its a Vortex. They've got that odd clamp on front sight on that thing as well. Ace does make a very nice windage stud that lets you use a AR FS post; read tritium. Dont go ordering a bunch y'all just got my AK back and I need a couple.

Link Posted: 11/20/2003 7:52:01 AM EST
[Last Edit: 11/20/2003 7:56:24 AM EST by M700Police]
Sorry for bumping this thread back up top but someone just sent me an email link to it. I'm not a regular reader here. The gun in the top picture is mine and it was built by Chris at AK-USA. Not too sure where you got that picture though as the quality is a bit off. As for the rear sight holding zero, it does so quite well. The gun was built on a .223 Saiga and the top cover fits quite tight. There is no noticeable side to side play. The gun shoots a bit under 2 MOA off a bipod and any deviation in zero can't be noticed. More pics here:

Link Posted: 11/20/2003 9:48:13 AM EST
Welcome to the boards, M700Police. You have a mighty fine rifle! I can't wait to have my AK74 kit built by Chris... once I find some money
Link Posted: 11/20/2003 2:29:11 PM EST
i just had an ak-102 started by chris at AK-USA, but i opted to go with the traditional sight and no rail. same .223 saiga setup as M700, with the new comps they are manufacturing now. chris told me that they use russian topcovers which are much tighter than the others and can retain zero on the irons.

M700 your rifle is truly a custom masterpiece.
Link Posted: 11/20/2003 5:32:40 PM EST
Thanks for the welcome and the compliment SuperChicken! Chris will be getting my Bulgie 74 kit in the near future too. I'm waiting on the new receivers from Global to do mine.

Thanks again daemon for the compliments...good to see a familiar face. I'm sure your rifle is going to be awesome, Chris does incredible work.

Link Posted: 11/21/2003 8:17:49 AM EST
Check out Millet Sights.


$36.00 plus shipping.

I called ACE & they stopped production of the rail for hte AK.
Top Top