Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Page / 4
Link Posted: 9/7/2005 2:16:58 AM EDT
Link Posted: 9/7/2005 2:24:47 AM EDT
Link Posted: 9/7/2005 2:31:39 AM EDT
For my two orders:

Link Posted: 9/7/2005 4:50:29 AM EDT
Any chance of getting pictures of each setup once it is completely finished?  Suppressor completely finished, etc....

I found it hard to visualize exactly what the completed rifle will look like.  Before spending the money I would like to know exactly what I am buying.
Link Posted: 9/7/2005 5:33:08 AM EDT
Link Posted: 9/7/2005 7:39:42 AM EDT
[Last Edit: 9/7/2005 7:41:03 AM EDT by CornFedHusker]
I would prefer the PBS-5 style can.


A big thanks to krinkfreak for being such a good point man on this project!

Link Posted: 9/7/2005 7:58:18 AM EDT
[Last Edit: 9/7/2005 7:59:17 AM EDT by JosephR]

if I order...

How are they attached and how would they need to be removed?  It would be nice to somehow remove the fake can, get the barrel correct length and swap if needed be once SBR'd...
Link Posted: 9/7/2005 8:27:46 AM EDT
Link Posted: 9/7/2005 12:34:38 PM EDT
If I ordered one could I go ahead and pay the deposit with a credit card or do you have to print out the form and mail it in?I know I need to mail a signed copy of  my dealers FFL. Just wanted to try and reserve one before they sold out.
Link Posted: 9/7/2005 12:59:07 PM EDT
PBS-5 Please
Link Posted: 9/7/2005 1:14:04 PM EDT
[Last Edit: 9/7/2005 1:15:10 PM EDT by krinkfreak]
Link Posted: 9/7/2005 9:27:52 PM EDT
PBS-5 for my order.
Link Posted: 9/8/2005 9:05:23 AM EDT
Are there two version of the PBS-5 suppressor?

The above picture shows a smooth one and one with texture on it.
Link Posted: 9/8/2005 10:20:19 AM EDT
Link Posted: 9/8/2005 10:36:38 AM EDT
I may have to get one of these.
Link Posted: 9/8/2005 10:59:32 AM EDT

Originally Posted By krinkfreak:
It appears we are going to go with the PBS-5 fake can.

The diameter will be scaled down to 1-1/2 to 1-3/4.

It will also have the knurling and not be smooth.

good choice.
Link Posted: 9/8/2005 11:07:48 AM EDT
Link Posted: 9/8/2005 11:23:21 AM EDT
[Last Edit: 9/8/2005 11:28:27 AM EDT by chapperjoe]
question - when are the Credit cards gonna be charged.  I understand a deposit by definition is kept under any circumstance.  Taht's the risk inherent here.  But are you going to wait to charge the card until shipment?  OR when is full payment due?

and whats the deposit  and i agree iwth suppresor choice.

ETA2: also what are 'form 1" markings ?
Link Posted: 9/8/2005 12:01:29 PM EDT
The deposit will be charged at the closing date of deposits. We will then contact you for final payment when they are complete. You can again use a CC or send a check.
Link Posted: 9/8/2005 12:22:07 PM EDT
[Last Edit: 9/8/2005 12:25:45 PM EDT by TravisAasen]

my order is on the way...for my two ---> consecutive numbers?

Link Posted: 9/8/2005 1:42:00 PM EDT
Damn two mucho dinero AK's in one week....  Gonna do some number crunching befor eI make a definite commitment.
Link Posted: 9/8/2005 4:09:56 PM EDT
I'm in.  Order on the way.  
Link Posted: 9/8/2005 8:19:07 PM EDT
Another order in the mail!!! It'll go out when they empty the collection box in the morning. I like the idea of a skinny PBS can.

I am sooo stoked! This was the only one of the current batch of kits I haven't picked up-- (well, except for those RPKs--) --and here it is, assembled by a master no less! Thanks, guys.
Link Posted: 9/8/2005 8:20:07 PM EDT
okay, I just sold 900$ worth of goods in three hours.... not bad!
Link Posted: 9/8/2005 9:28:07 PM EDT
For those of us who will be going the SBR route in the future, exactly where on the receiver will our info be engraved?  I was thinking on the bottom of the receiver, just fwd. of the mag well??
Link Posted: 9/9/2005 5:30:51 AM EDT
I'm sorry but Armory has their logo there. We will probably have to engrave it along the bottom edge of the top cover on the receiver. I thought about under the pistol grip. But there may not be enough room. I'll check again.
Link Posted: 9/9/2005 7:08:50 AM EDT
ok, time for two more pictures- with new black textured can magazine inserted with and without stock unfolded
Link Posted: 9/9/2005 7:16:44 AM EDT
Link Posted: 9/9/2005 12:44:56 PM EDT
Sent order for (1) Priority Mail today.
Link Posted: 9/9/2005 5:30:02 PM EDT
First Post as a Team Member...

Order for one rifle with engraving sent with FFL and Deposit yesterday.

Is the rifle being shipped with a magazine? If so, how many round capacity and how are you addressing those of us that live in a capacity restricted states? I live in Maryland and we cannot have magazines over 20 rounds shipped into our state.

Many Thanks to Krinkfreak and In Range for put together the SEAK III buy.

Link Posted: 9/10/2005 7:48:23 AM EDT
Yes they come with a 30rd Yugo mag. PLEASE, PLEASE leave me a note on that with your order and I'll swap it out for a twenty.
Link Posted: 9/10/2005 7:55:14 AM EDT
I was told by a local dealer for class III firearms that the Krinkov does not have a barrel long enough to properly stabilze the bullet for use with a real suppressor.  He said that AAC makes one, but Gemtech recommends against it due to a possible baffle strike.

Can anyone shed more light on this?
Link Posted: 9/10/2005 8:48:15 AM EDT
Link Posted: 9/10/2005 4:45:41 PM EDT
I hate to be a dick, but are we going to see what the final can is going to look like?  That is, this new PB5 can?
Link Posted: 9/10/2005 4:48:27 PM EDT
Link Posted: 9/10/2005 4:51:07 PM EDT
Link Posted: 9/10/2005 5:39:27 PM EDT
Link Posted: 9/12/2005 4:33:55 AM EDT
[Last Edit: 9/12/2005 4:42:18 AM EDT by krinkfreak]
Link Posted: 9/12/2005 4:38:30 AM EDT
Do all Krinkovs have short barrels or do some have a full length barrel?
Link Posted: 9/12/2005 4:44:32 AM EDT
Link Posted: 9/12/2005 4:51:14 AM EDT
Just wondering since I'm in a non friendly SBR state it would make sense to have a long barrel for better accuracy, etc.  

Then you could still put a fake suppressor over the top and it would look exactly the same won't it?
Link Posted: 9/12/2005 5:42:31 AM EDT
[Last Edit: 9/12/2005 8:38:11 AM EDT by krinkfreak]
Link Posted: 9/12/2005 6:54:28 AM EDT
How does is the accuracy of Krinkovs compare to regular 7.62 AKs?
Link Posted: 9/12/2005 8:06:51 AM EDT
In a review of a recent production AK I read that some thought shorter barreled AK's are MORE accurate cause of the effects of having less moving mass on the piston/oprod/bolt assembly produce less torquing of the non free floated barrel.  Did I say that right?
Link Posted: 9/12/2005 7:56:39 PM EDT
I am still curious if the Krink in this caliber can reliably be shoot with a true suppressor attatched.

Anyone know?
Link Posted: 9/12/2005 8:24:05 PM EDT
I have an AAC can for my Bulgarian Krinkov in 7.62 and 5.45. They both work flawless. Also the Bulgarian is a shorter bbl. and different thread pitch.
Link Posted: 9/12/2005 8:39:29 PM EDT

Originally Posted By INRANGEC2:
I have an AAC can for my Bulgarian Krinkov in 7.62 and 5.45. They both work flawless. Also the Bulgarian is a shorter bbl. and different thread pitch.

Thank you sir, that puts me at ease.

Headding to the dealer tomorrow for the FFL.
Link Posted: 9/12/2005 10:34:11 PM EDT

Originally Posted By krinkfreak:
We should have an updated pic of the scaled down PBS-5 can by the end of the week.

The scaled down can will be identical to this can, but the diameter where it meets the FSB will be 1 1/2 to 1 3/4.

Is this about the size we're shooting for?  From the ORF website....

Link Posted: 9/13/2005 4:53:21 AM EDT
Link Posted: 9/13/2005 8:19:14 AM EDT
[Last Edit: 9/13/2005 1:47:35 PM EDT by chapperjoe]
I got the FFL today, hope to send everything out this week.

CRAP I WASTED POST 8K ON THIS ?!?!?!?!  oh well.
Page / 4
Top Top