QUICK CHANGE BARREL ASSEMBLY
All barrels are chrome lined and complete with gas block, gas plug (self or user adjustable) and gas piston. Iron front sight sold separately.
SELF REGULATING, CHROME LINED ,1:9 TWIST BARRELS
16.25" barrel $499.00 in stock
12.5" barrel $549.00 in stock
20" barrel $549.00 out of stock
AJUSTABLE 4 POSITION GAS REGULATOR, CHROME LINED, 1:9 TWIST BARRELS
16.25" barrel $599.00 in stock
12.5" barrel $649.00 in stock
20" barrel $649.00 out of stock
IRON SIGHTS
The SHRIKE sights are made out of tough steels and alloys. The SHRIKE iron sights are AR15 height from the bore line for easy user transition, but standard sight or dual plan AR sight will not work. The rear sight is a bolt on design for the rear 1913 spec rail on the top cover. The Front sight is both windage and elevation adjustable so you can sight in each individual barrel.
Front sight $125.00 in stock
Rear sight $150.00 in stock
MIL-STD 1913 RAIL HANDGUARD ASSEMBLY
The rail rail hand guard for the SHRIKE is more than just normal rail hand guard, its offers superior strength in the form of twin front and rear bulk heads for the maximum in structural integrity, barrel alignment and heat transfer. Barrel alignment and barrel changing speed are enhanced with this design allowing for not only a 3 second barrel change, but a precise barrel alignment. It also is a housing for the simple and robust operating rod. Our rail hand guard is a true 1913 spec, hard coat anodized and adds the true modularity needed for today's firearms. FACTORY INTSALL ONLY.
RAIL HANDGUARD
$599.00
$150.00 INSTALLATION FEE (ONLY CHARGED IF YOU SEND A STD HAND GUARD UPPER IN LATER FOR FACTORY REFIT)
Gen-II MAG ADAPTER FOR M249 BAGS
The new Shrike 5.56™ Gen-II Magazine Adapter readily fits into the mag-well of your lower receiver and permits attachment of the M249 SAW ammunition containers when shooting your belt-fed Shrike™. Precision machined from high-strength aircraft alloys and hard coat anodized per MIL-A-8625F for maximum corrosion and wear resistance; the Gen-II Magazine Adapter is placed into the lower receiver’s magazine well and locates any style of M249 SAW (100 and 200 round) ammunition boxes and bags directly beneath the weapon. This improves balance and center of gravity for rapid target engagement! –No more free-hanging belts!
-Drop-Free design permits immediate transition from belt-feed to magazine feed if needed!
SPARE PARTS
The SHRIKE bolt parts are machine gun tough quality. While parts breakage is very low for the SHRIKE we offer these commonly purchased products for any system.
SPARE BOLT,CARRIER/PARTS
Bolt (complete) $225 in stock
Extractor $39.95 in stock
Extractor pin $19.95
Firing pin $8.00
AMG(belt feed) carrier stripped $380.00 in stock
Feed roller $180 in stock
Complete bolt/carrier assembly $750.00 in stock
Buttstock parts
Main action spring (buffer spring) $12.50 in stock (included in belt feed upper orders)
Carbine Spacer $9.95 in stock (included in belt feed upper orders)
Full length spacer (needed for belt feed upper if using A1/2 stocks) $29.95 in stock
BELT-FEED PARTS
New ARES Defense Shrike 5.56™ Billet Feed Tray
The new ARES Defense Shrike 5.56™ Billet Feed Tray is designed to fit ALL Shrike 5.56™ models including earlier units that were originally shipped with stamped sheet metal tray. These trays are purpose designed for the Shrike™ and include locating surfaces that interact with the sides of the receiver for extra stability and enhanced feed geometry. Designed and precision machined to exacting specifications for maximum performance; these billet feed trays are the perfect replacement part or upgrade for expert shooters!
$349.95 – IN STOCK!
New ARES Defense Shrike 5.56™ Billet Steel Feed Tray (Phosphate Finish)
The new ARES Defense Shrike 5.56™ Billet Steel Feed Tray is designed to fit ALL Shrike 5.56™ models. These trays are purpose designed for the Shrike™ and include locating surfaces that interact with the sides of the receiver for extra stability and enhanced feed geometry. Designed and precision machined to exacting specifications for maximum performance; these billet steel feed trays are the perfect replacement part or upgrade for expert shooters!
$699.00 - IN STOCK!
New ARES Defense Shrike 5.56™ Billet Steel Feed Tray (Electroless Nickel Plated)
The new ARES Defense Electroless Nickel Plated Billet Steel Feed Tray is designed to fit ALL Shrike 5.56™ models. These trays are purpose designed for the Shrike™ and include locating surfaces that interact with the sides of the receiver for extra stability and enhanced feed geometry. Designed and precision machined to exacting specifications for maximum performance; these electroless nickel plated billet steel feed trays have a surface hardness of Rc 60-62. These are the perfect replacement part or upgrade for extreme shooting in adverse conditions or military operations in corrosive salt water environments!
$789.00 - IN STOCK!
New UNFIRED M27 Ammunition Links
Brand NEW M27 ammunition links for your Shrike 5.56™! Don't rely on used range pickups when shooting really matters! These
brand new links are the perfect choice for ultimate performance and reliability!
$49.95 per thousand links - IN STOCK! (supplies limited)
ARES Defense Shrike 5.56™ Belt-Feed Upgrade Kits
The new ARES Defense “Shrike 5.56™ Belt-Feed Upgrade Kit” fits in your armorer’s field bag and includes everything necessary to repair or replace components of your belt-feed system. These kits can also be used to convert your Shrike AAR™ rifle to the dual-feed Shrike AMG™ in just minutes. Designed to fit ALL Shrike 5.56 models! For a limited time only, we are including a free Gen-II Magazine Adapter and a spare bolt catch for your extra lower receiver; a $137.50 value!
Kit Includes:
- Complete Feed Cover Assembly
- New Style Billet Feed Tray
- Dual-Feed Bolt Carrier
- Feed Roller Assembly
- Main Action Spring
- Stock Spacer
Included Free for a Limited Time:
- Gen-II Magazine Adapter; a $125. value!
- Shrike™ Bolt Catch; a $12.50 value!
Main Features:
- Top-Cover: Precision machined from high-strength 7075-T6 and hard coat anodized per MIL-A-8625F for maximum corrosion and wear resistance. Integral MIL-STD 1913 Picatinny Rail permits the mounting of sights, optics and NVD’s.
- Billet Feed Tray: Designed and precision machined to exacting specifications for maximum performance. (These are purpose designed for the Shrike and are not modifications of another product.)
- Dual-Feed Bolt Carrier and Feed Roller Assembly: Precision machined from high-strength aerospace alloys and heat treated to exact specifications to provide years of reliable use.
- Main Action Spring: Provides the necessary stripping forces required for reliable belt-feed operation from the recommended M27 disintegrating link.
- The Gen-II Magazine Adapter (free for a limited time only) is placed into the lower receiver’s magazine well and accepts all M249 SAW style (100 and 200 round) ammunition boxes and bags. –No more free-hanging belts!
$2,795.00 – IN STOCK!
http://www.shrike556.com/Home_Page_0KGR.html
Thanks for looking! PICS AND MORE PARTS PRICING WILL BE ADDED SOON!!!