I have a question.. Well, more of a request. Ive spoken to you guys here before and recently had my old gemtech HVT QM's mount swapped to the 1.375x24 tpi and am using your plan a. I also am awaiting my rex silentium mg7 358 bore that will have another plan a. I want to know if there is any way you guyc can either make or maybe confirm if any of your 5.56 muzzle devices will work with BOTH your plan a adapters AND my gemtech gmt halo? One of your m4sd looking (I.e. longer) taper mount FH seems like if might allow the closer to lock in behind the taper's threads... I ask hecause I wanna stay with your guy's mounts as you have arguably the largest selection and best mounts available for any weapon currently (I honestly thought before discovering your taper mounts that the bilock system was better and they never carbon locked BUT Gemtech has terrible CS and would never let me know if I could either chop down a MD lr if they could make me a few so I had the damn mount swapped).
Also, i recently discovered that dead air is coming out with a new taper mount system kinda like yours and Q's but will use a2 flash hider designs and keep the BFA grooves... Now I'm almost positive that would work with my halo but I wanna stick with your Plan A. But i use the halo on every single new build for testing with a can bc its pretty corked up and doesnt require a special mount... And I also love it. Tone, ease of use, rarely carbon locks and even if it happens a strap wrench will remove it... I simply love my gmt halo and use it on a variety of my 5.56 guns. I love the combo of it and the bcm mod 0 comp, the vltor comp and your guy's hammer comp and brakes. DDs a2 is great too. Anyway, back to the subject...
If using an existing taper mount isnt feasible, is it possible that you guys could just fabricate me a different closer that would work with your taper mount MDs? I know someone made a closer to run AACs 51t mounts a long time ago so i dont see why you couldn't especially if I used the longer MDs thay would actually travel into the halo's bore as they are supposed to. I would happily send my HALO to you if you wanted to test and find out if its possible. I can tell you that a lot of us halo owners would jump immediately at the chance to get an optional adapter to use your taper mounts whilst retaining the ability to remove it and use the OEM closer on other guns without the taper interface/a2 FHs.
I also read on an old forum post from you guys that you used to have a special closer you made for the gmt halo that allowed it to be used on guns with pinned crush washer'd a2's... Is that still available? Can i get the old longer closer to interface with longer MDs? So many questions for you... Im sorry!
Also, I just sent a customer to you guys to buy the RECCE 7 for his 2 ar15s... I just sold him my 11.5 and he also has an 18" SPR and hes now wanting me to build him a blackout upper.