Quote History Quoted:
^^^
Set the spring aside, then drop the ejector device back down into it's pocket. Science bitches.
View Quote
Here's what I have Mark:
Three BCGs / bolts, top is from my .260 tOBR, middle is from the 6.5CM UU kit and the bottom is from my 7.62 tOBR, all are Lt762-16 Rev E's.
The bolts: 260, 6.5 and 7.62; all appear to have the same sized firing pin holes.
Stripping the bolt:
6.5CM bolt stripped - radius visible inside the ejector channel:
6.5CM and .260 bolts, same inside radius:
6.5CM bolt and spare LaRue 7.62 bolt from OBR Spare Parts Kit (old style):
6.5CM bolt and old style OBR bolt, which has no radius:
Drop the ejector in the channel and it looks like one may continue to function and one may not - can I trade this old bolt in for the upgrade?
6.5CM bolt and JP HP bolt, JP has smaller FP hole; I did not strip the JP, nor am I concerned about the size of the hole. ETA - The firing pin hole!