

[#1]
|
|
Getting old ain’t for sissies.
|
[#2]
I will just order the non oem copy.
|
|
Getting old ain’t for sissies.
|
[#3]
|
|
I pray that this post is not a waste of site resources.
|
[#4]
Order placed.
I will get the breaker and romex from Home Depot. 15’ of 10ga 3 wire. Right? |
|
Getting old ain’t for sissies.
|
[#5]
|
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
[#6]
Originally Posted By pepperbelly: Order placed. I will get the breaker and romex from Home Depot. 15’ of 10ga 3 wire. Right? View Quote Yes on the gauge. I used 10-2 romex but it came with a ground wire, so technically it was three wires. I also was doing a 3 prong inlet so it worked perfectly. If you're doing a 4 prong outlet, believe you'll need 10-3 romex with a ground, so total of 4 wires. @FALARAK, keep me honest. |
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
[Last Edit: FALARAK]
[#7]
You need 10/3 romex.
That's 3 insulated conductors and a ground. I dont know how many feet you need..... it just depends on where you are mounting your inlet. If you only need a few feet you can buy it by the foot and save some money. However, most places are sold out of many sizes of romex that I have looked.... good luck! |
|
I pray that this post is not a waste of site resources.
|
[#8]
Originally Posted By FALARAK: You need 10/3 romex. That's 3 insulated conductors and a ground. I dont know how many feet you need..... it just depends on where you are mounting your inlet. If you only need a few feet you can buy it by the foot and save some money. However, most places are sold out of many sizes of romex that I have looked.... good luck! View Quote Thanks. I will check tomorrow for romex. My order from Amazon will be here Wednesday. |
|
Getting old ain’t for sissies.
|
[#9]
Originally Posted By pepperbelly: https://www.ar15.com/media/mediaFiles/26190/094C94A1-38AC-409E-92F3-30B34505654C_jpe-2267999.JPG View Quote Damn, who installed that? Is it even straight? |
|
|
[#10]
Originally Posted By joemama74: Damn, who installed that? Is it even straight? View Quote View All Quotes View All Quotes Originally Posted By joemama74: Originally Posted By pepperbelly: https://www.ar15.com/media/mediaFiles/26190/094C94A1-38AC-409E-92F3-30B34505654C_jpe-2267999.JPG Damn, who installed that? Is it even straight? I may be holding my phone crooked. An electrician installed that for me years ago. My old panel was really small. He installed this over the old panel. |
|
Getting old ain’t for sissies.
|
[#11]
After reading some of the questions on this post may I recommend some of you hire a qualified electrician for this hookup. I would hate to read about one of you getting fried or burning down your house. I have wired several houses and my shop but once I get inside the breaker box, all SquareD, I call in the experts.
|
|
|
[#12]
@Falarak did you use s standard breaker or an arc fault breaker?
I was just going to buy a standard breaker. |
|
Getting old ain’t for sissies.
|
[Last Edit: FALARAK]
[#13]
|
|
I pray that this post is not a waste of site resources.
|
[#14]
Originally Posted By FALARAK: Standard. Just like my links show. The part number I used is in the link. View Quote View All Quotes View All Quotes Originally Posted By FALARAK: Originally Posted By pepperbelly: @Falarak did you use s standard breaker or an arc fault breaker? I was just going to buy a standard breaker. Standard. Just like my links show. The part number I used is in the link. I have a homeline panel. Your link is for a QO breaker. |
|
Getting old ain’t for sissies.
|
[#15]
Originally Posted By pepperbelly: I have a homeline panel. Your link is for a QO breaker. View Quote View All Quotes View All Quotes Originally Posted By pepperbelly: Originally Posted By FALARAK: Originally Posted By pepperbelly: @Falarak did you use s standard breaker or an arc fault breaker? I was just going to buy a standard breaker. Standard. Just like my links show. The part number I used is in the link. I have a homeline panel. Your link is for a QO breaker. DOH! Yeah you are right. :-) |
|
I pray that this post is not a waste of site resources.
|
[#16]
Originally Posted By FALARAK: DOH! Yeah you are right. :-) View Quote View All Quotes View All Quotes Originally Posted By FALARAK: Originally Posted By pepperbelly: Originally Posted By FALARAK: Originally Posted By pepperbelly: @Falarak did you use s standard breaker or an arc fault breaker? I was just going to buy a standard breaker. Standard. Just like my links show. The part number I used is in the link. I have a homeline panel. Your link is for a QO breaker. DOH! Yeah you are right. :-) No problem. I knew to buy a Homeline. I just didn’t know if I needed an arc fault or just s standard. I bought s standard. Thanks for the help. |
|
Getting old ain’t for sissies.
|
[#17]
Did @pepperbelly die or what
![]() |
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
[#18]
Originally Posted By DallasLooterShooter: Did @pepperbelly die or what ![]() View Quote Not dead yet. I have honestly been hoping romex price would drop. A 15’ length is $65 at HD. I have a hole made to pass the extension cord through into my garage and a cover. I have everything but the romex. It is getting to the time of year it might come in really handy too. I should finish it by this weekend. |
|
Getting old ain’t for sissies.
|
[#19]
Any update?
|
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
[#20]
Originally Posted By DallasLooterShooter: Any update? View Quote No. We got distracted by some other stuff going on. Our friend hasn’t had time to look for the wire I need. It sounds like he is so busy he hasn’t been in the shop for a while. I will get it wired in before the spring storm season hits. |
|
Getting old ain’t for sissies.
|
[#21]
What’s the latest @pepperbelly?
|
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
[#22]
|
|
Getting old ain’t for sissies.
|
[#23]
Originally Posted By FALARAK: When using a 120V generator and a special bridging cable for the two hots, you supply 120V to EACH side of the panel, but not out of phase. Therefore - nothing that uses 240V will work. However, ANYTHING that uses 120V works fine. You can control which circuits get power simply by flipping the breakers. View Quote Feeding the manual transfer switch breaker from the L14-30 inlet box from the generator I know all of the 240V circuit breakers have to stay off, but what about 120V circuit breakers that are dual lug? |
|
|
[#24]
Someone is going to die of old age before this gets installed.
![]() |
|
|
[#25]
Originally Posted By brazos609: Feeding the manual transfer switch breaker from the L14-30 inlet box from the generator I know all of the 240V circuit breakers have to stay off, but what about 120V circuit breakers that are dual lug? View Quote View All Quotes View All Quotes Originally Posted By brazos609: Originally Posted By FALARAK: When using a 120V generator and a special bridging cable for the two hots, you supply 120V to EACH side of the panel, but not out of phase. Therefore - nothing that uses 240V will work. However, ANYTHING that uses 120V works fine. You can control which circuits get power simply by flipping the breakers. Feeding the manual transfer switch breaker from the L14-30 inlet box from the generator I know all of the 240V circuit breakers have to stay off, but what about 120V circuit breakers that are dual lug? I'm not familiar with what you are talking about. Example? |
|
I pray that this post is not a waste of site resources.
|
[Last Edit: DallasLooterShooter]
[#26]
|
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
[#27]
|
|
Getting old ain’t for sissies.
|
[#28]
|
|
I pray that this post is not a waste of site resources.
|
[#29]
I have 5 portable generators in my garage right now and the electrician tried in our 80KW generator last November.
NOT ONE FRIGGIN POWER OUTAGE SINCE. NOT EVEN A BLINK. I need to break out the two oldest portables and put them up for sale. Then armagedon was bust loose. I decided to sell my old truck too. Still fully insured. The hail storms seem to be dodging my area when I leave it outside. |
|
|
[#30]
Originally Posted By joemama74: I have 5 portable generators in my garage right now and the electrician tried in our 80KW generator last November. NOT ONE FRIGGIN POWER OUTAGE SINCE. NOT EVEN A BLINK. I need to break out the two oldest portables and put them up for sale. Then armagedon was bust loose. I decided to sell my old truck too. Still fully insured. The hail storms seem to be dodging my area when I leave it outside. View Quote Holy shit, are you me? ![]() Kept full coverage on my 05 waiting for the next hail storm. Blew the rear diff first... had to get a new truck. Had my generator wired to the house since march 2021. Not a blink. |
|
|
[#31]
Originally Posted By nottooslow: Holy shit, are you me? ![]() Kept full coverage on my 05 waiting for the next hail storm. Blew the rear diff first... had to get a new truck. Had my generator wired to the house since march 2021. Not a blink. View Quote View All Quotes View All Quotes Originally Posted By nottooslow: Originally Posted By joemama74: I have 5 portable generators in my garage right now and the electrician tried in our 80KW generator last November. NOT ONE FRIGGIN POWER OUTAGE SINCE. NOT EVEN A BLINK. I need to break out the two oldest portables and put them up for sale. Then armagedon was bust loose. I decided to sell my old truck too. Still fully insured. The hail storms seem to be dodging my area when I leave it outside. Holy shit, are you me? ![]() Kept full coverage on my 05 waiting for the next hail storm. Blew the rear diff first... had to get a new truck. Had my generator wired to the house since march 2021. Not a blink. This seems to be the way. Mine would go out on a breezy day (not like today in N TX) or if a squirrel takes a leak on the wire. Then I got a generator and it's been used maybe twice in the last 8 or so years. Jester |
|
|
[#32]
It finally happened this morning and it worked perfectly. I was driving to the doctor's office and got a notification through Ring that power went out. A minute later I got a notification that power was back on. I didn't think much about it. I was picking up a few things for work after and got a call at 11 that the generator was still running.
So I drive over and check it out. We're on 3 phase and the generator is running and is still switched over as the supply. City power is disconnected. 2 - 120v legs and running 125v at the main. The Delta leg (230v) is running 135v. So the transfer switch knew the delta leg was bad and kicked the whole thing out. Oncor said it would be a few hours before they could get it restored. We had plenty of diesel and we were only pulling 33KW on an 80KW unit, so we just let it run and we left to go back to our main facility. About 2:30 we got a call from Oncor saying power had been restored and if we had issues to contact our electrician. We called the other facility to check on their status. Sure enough, transfer switch switched the load and the generator had just shut down. Awesome. Just fucking awesome. |
|
|
[#33]
![]() |
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
[#34]
|
|
Getting old ain’t for sissies.
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2022 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.