User Panel
Posted: 3/27/2020 8:57:57 AM EDT
Revolver cylinders need to be fluted, every time I see an unfluted one it just doesnt look right.
Anyone else feel this way ? |
|
I always think man, the CNC missed a few lines...
They do look very generic and plain. |
|
|
|
|
I know what I like
Attached File I really like the machining on the little Ruger LCR cylinder Attached File |
|
I think it adds a unique look. My next revolver will be something like 3" unfluted in 327 or 9mm (if it exists)
|
|
Personal preference: I like them on single-action revolvers, but no so much on modern DA revolvers. To each his own.
|
|
I understand the reason they probably should be fluted but unfluted has always looked better to me.
Attached File |
|
Quoted: https://i.imgur.com/Dmr9cIR.jpg https://i.imgur.com/zPcbMNm.jpg https://i.imgur.com/0FRtoHy.jpg https://i.imgur.com/FezmyF1.jpg https://i.imgur.com/fNn1MjK.jpg https://i.imgur.com/KK9KmTi.jpg https://i.imgur.com/pTB0ogt.jpg https://i.imgur.com/BbX4Cau.jpg . . . . GET BOTH https://i.imgur.com/1eCZYkk.jpg View Quote Is that your backyard? If so, I'm very jealous. |
|
I understand the reason but aesthetically they don’t do it for me.
|
|
|
View Quote Which model is that? 3"? |
|
|
Quoted: I came to post this. Doesn't the extra weight also cause the timing to wear faster? View Quote That's what I've been told by several competition shooters. Quicker to wear out. Know one that swore to never run another one. It takes more force to turn it the same speed. That's one of the reasons the dedicated competition guns sometimes have titanium cylinders although I imagine you're just making another longevity compromise at that point. One of the early Miculek guns had a titanium cylinder and big honking orange front sight. The pull was so light and easy even without heavy action work. |
|
Thanks, I thought I remembered something like that. Titanium cylinder huh? Damn, I bet that action was light!
Quoted: That's what I've been told by several competition shooters. Quicker to wear out. Know one that swore to never run another one. It takes more force to turn it the same speed. That's one of the reasons the dedicated competition guns sometimes have titanium cylinders although I imagine you're just making another longevity compromise at that point. One of the early Miculek guns had a titanium cylinder and big honking orange front sight. The pull was so light and easy even without heavy action work. View Quote |
|
Quoted: Thanks, I thought I remembered something like that. Titanium cylinder huh? Damn, I bet that action was light! View Quote View All Quotes View All Quotes Quoted: Thanks, I thought I remembered something like that. Titanium cylinder huh? Damn, I bet that action was light! Quoted: That's what I've been told by several competition shooters. Quicker to wear out. Know one that swore to never run another one. It takes more force to turn it the same speed. That's one of the reasons the dedicated competition guns sometimes have titanium cylinders although I imagine you're just making another longevity compromise at that point. One of the early Miculek guns had a titanium cylinder and big honking orange front sight. The pull was so light and easy even without heavy action work. They put titanium cylinders in a lot of their guns but most of them are the lightweights. A steel frame and barrel with a titanium cylinder was spiffy. |
|
I don't care for them from a purely mechanical standpoint. If the steel isn't needed, a lighter cylinder is better. Less trigger pull, less damage over time to the cylinder stop, etc.
|
|
Quoted: That's what I've been told by several competition shooters. Quicker to wear out. Know one that swore to never run another one. It takes more force to turn it the same speed. That's one of the reasons the dedicated competition guns sometimes have titanium cylinders although I imagine you're just making another longevity compromise at that point. One of the early Miculek guns had a titanium cylinder and big honking orange front sight. The pull was so light and easy even without heavy action work. View Quote View All Quotes View All Quotes Quoted: Quoted: I came to post this. Doesn't the extra weight also cause the timing to wear faster? That's what I've been told by several competition shooters. Quicker to wear out. Know one that swore to never run another one. It takes more force to turn it the same speed. That's one of the reasons the dedicated competition guns sometimes have titanium cylinders although I imagine you're just making another longevity compromise at that point. One of the early Miculek guns had a titanium cylinder and big honking orange front sight. The pull was so light and easy even without heavy action work. I'm thinking that might be more of an issue on competition (or abused) guns? I've seen fluted cylinders with peened cylinder notches as well which leads me to believe that it has more to do with shooting style than a slight difference in weight? I practice a smooth double action pull without jerking the trigger and see no signs of peening/wear on the notches, cylinder stop, hand or extractor ratchet. |
|
Some guns don't look right with the flutes. There are a few examples here that look amazing without the flutes. Then there is the other side of the spectrum, such as the Ruger LCR. They took weight reduction to a whole different level and I like what they did. It's nice to have choices.
|
|
Quoted: I'm thinking that might be more of an issue on competition (or abused) guns? I've seen fluted cylinders with peened cylinder notches as well which leads me to believe that it has more to do with shooting style than a slight difference in weight? I practice a smooth double action pull without jerking the trigger and see no signs of peening/wear on the notches, cylinder stop, hand or extractor ratchet. View Quote Competition guys can wear out anything. The kid I knew basically wore out two Smiths. It wouldn't have mattered what they were made of. He did however wear out the non fluted gun sooner and while I don't think it was the only factor it was a factor. At the rate I shoot now which is almost none or even when I was shooting a lot my revolver shooting made up such a small part that they will last forever. |
|
Quoted: Revolver cylinders need to be fluted, every time I see an unfluted one it just doesnt look right. Anyone else feel this way ? View Quote Yes. Another way for Ruger to make their already-too-heavy revolvers even heavier. But obviously it helps sales because there are many out there who see an unfluted cylinder and immediately think they're getting a stouter revolver. |
|
Quoted: I kinda like' em. https://www.AR15.Com/media/mediaFiles/766/UW_P_340gr-1051771-1184570.jpg https://www.AR15.Com/media/mediaFiles/766/J7b5zmc-210150.jpg View Quote Are those yours? and if they are, why do you hate your wrists so? |
|
No. I love the unfluted cylinder look. Unfortunately, they never made them on any revolvers that I like i.e. Colt Python, S&W model 657, or SW 386PD.
|
|
Quoted: I understand the reason they probably should be fluted but unfluted has always looked better to me. https://www.AR15.Com/media/mediaFiles/129950/56F4AD88-14BA-47F5-8288-C7D04610E704_jpe-1336963.JPG View Quote I agree. They look super cool! They just don't make them in the revolvers that I like. |
|
It won't stop a purchase of mine with or without, but I think unfluted looks cleaner.
|
|
I do like the J frame 360 without flutes, so I guess im not 100% against it.
|
|
I am complete opposite. If i could have unfluted cylinders on every revolver, I would. I love it.
|
|
I passed on a 686 pre lock years ago with an unfluted cylinder and still regret it. Every time I see a pic of an S&W without flutes, I think about that gun. One of these days..
|
|
Originally Posted By INV136: No. I love the unfluted cylinder look. Unfortunately, they never made them on any revolvers that I like i.e. Colt Python, S&W model 657, or SW 386PD. View Quote Smith's first run of the 657 Classic Hunter with a 6.5" bbl had a nonfluted cylinder. Circumstances at the time, I let mine go Historically Colt started his revolvers without fluted cylinders. CD |
|
I like the way unfluted looks on single action revolvers, but like fluted better on double actions.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.