I purchased a Kadet 2 for my 85 and wanted another slide stop to go with it. The kit came with 2 slide stops. Both are too short on the shaft to fully engage the right side slide release. One has the leg that sits on the magazine notch that is too short. The other has a leg that is longer and hits the notch perfectl
I tig welded and extension to the 75 shaft and shaped to fit the right side release. Tested and operates both 9mm and .22 mags


Next slide release is for an 85 Combat. The shaft is the correct length, but the leg that sits on the magazine notch is too short to engage it.
Welded an extension and needle filed to shape





Kit all set up with spare slide stops!