User Panel
User Panel
User Panel
USA
|
Posted: 11/29/2019 1:28:42 AM EDT
[Last Edit: seattlite]
[#1]
20% off at the keltec webstore with free shipping. Good time to stock up on CP33 mags.
|
|
|
|
Posted: 12/4/2019 1:21:57 AM EDT
[#2]
Bummer missed it.
|
|
|
|
MO, USA
|
Posted: 12/26/2019 9:18:42 PM EDT
[#3]
Well I bought myself a xmas gift. The keltec cp33, I was all fired up about finding it. But after taking it out a few times, this gun has problems. I took it back where I bought it. He is a gun smith, he loaded up and took it out and fired it. He used good ammo and he even had problems with it jamming up. He said I need to just load 15-20 rounds and keep working with it and carry a small screwdriver with me to reposition the ammo. I have shot about 600 rounds of CCI mini mags threw it. Ive had it rim lock. Failure to feed. Ive always loved keltec ideas but seems like they get a good idea then drop the ball. The mags are ridiculously frustrating when they stack wrong. Im probably going to send mine back to Keltec.
|
|
|
|
Posted: 12/26/2019 9:48:12 PM EDT
[#4]
Quote HistoryOriginally Posted By beleive:
Well I bought myself a xmas gift. The keltec cp33, I was all fired up about finding it. But after taking it out a few times, this gun has problems. I took it back where I bought it. He is a gun smith, he loaded up and took it out and fired it. He used good ammo and he even had problems with it jamming up. He said I need to just load 15-20 rounds and keep working with it and carry a small screwdriver with me to reposition the ammo. I have shot about 600 rounds of CCI mini mags threw it. Ive had it rim lock. Failure to feed. Ive always loved keltec ideas but seems like they get a good idea then drop the ball. The mags are ridiculously frustrating when they stack wrong. Im probably going to send mine back to Keltec. |
|
|
|
FL, USA
|
Posted: 1/24/2020 3:34:59 PM EDT
[#5]
Just shot mine, (with a Sparrow) it ran excellent. I loaded 5 mags to 33rds, the only problem was loading the first round. The slide didn't have enough force to close all the way. I just saw this thread and noticed to load to 32, no problem. Its was very accurate and had no jams...cool little toy. Put about 250 rounds total.
|
|
|
|
Posted: 2/22/2020 7:07:54 PM EDT
[#6]
New toy. Budget red dot , stippled grip, safety, charging handle. Next will be a fs1913 folding brace. Also made a Kydex owb holster that uses a combat loop for belt attachment. Print is black leather look. For the grip stipple, I only stippled the raised squares but I continued the squares on the front and back strap.
 Attached File Attached File Attached File |
|
|
|
|
Posted: 3/13/2020 2:44:08 PM EDT
[#7]
|
|
|
|
|
Posted: 3/14/2020 10:57:10 PM EDT
[#8]
Quote HistoryOriginally Posted By Tolip:
I finally found one :D Now i just need to pick out a red dot https://www.AR15.Com/media/mediaFiles/80189/Resized_20200313_130137_jpeg-1314056.JPG I had mine out yesterday. Ran 150 problem feee rounds. Love this little gun!  Attached File |
|
|
|
|
Posted: 3/19/2020 12:44:42 PM EDT
[#9]
im seeing them in stores now. $419
|
|
|
|
|
Posted: 3/22/2020 10:30:16 PM EDT
[Last Edit: HK_DUDE]
[#10]
Quote HistoryOriginally Posted By beleive: Well I bought myself a xmas gift. The keltec cp33, I was all fired up about finding it. But after taking it out a few times, this gun has problems. I took it back where I bought it. He is a gun smith, he loaded up and took it out and fired it. He used good ammo and he even had problems with it jamming up. He said I need to just load 15-20 rounds and keep working with it and carry a small screwdriver with me to reposition the ammo. I have shot about 600 rounds of CCI mini mags threw it. Ive had it rim lock. Failure to feed. Ive always loved keltec ideas but seems like they get a good idea then drop the ball. The mags are ridiculously frustrating when they stack wrong. Im probably going to send mine back to Keltec. I haven't read the replies here for a while. I would bet that your troubles are all due to rim lock. Do you have one of the American loaders? I am not associated with them in any way...when using their loaded, I rarely to never have any screwed up mags. You need to look at the stack and make sure the stagger is in/out, in/out, etc....hope that makes sense. I have a small curved dental pick type tool that I use to adjust the stack if one has to be pushed one way or the other. It is a bit of a pain to some, but not that big of a deal really. Hopefully that helps you. Added: Mine does bot like the ammo with the gummy bullets....Remington Golden especially. It shot it fine a couple mags, but the lube from the bullets gums up the mags and makes the rounds slow to advance. I am having great luck with Winchester M22 now. The M22 has become my go to for rimfire ammo. Reliability has been great in the 4 guns I run it in. Feeds and functions very well. I have had one dud, and haven't tested for accuracy yet. $42/1000 at Wally World doesn't hurt either. I really like the "coated" bullets, they are not gummy in anyway at all. |
|
|
|
TN, USA
|
Posted: 4/17/2020 3:07:55 PM EDT
[#11]
The grip is for demonstration purposes only. That aside, I love this gun. It loves CCI 40 gr mini mags and CCI Stingers. So far it's ran the 40gr golden bullet and the federal black pack bulk pack stuff also. Those just seem to need a bit more attention loading the mags. The cci are effortless loading and with the others I've had to really take the time to make sure they don't rim lock. I'm getting 2 more mags and one of the cp33 specific loaders delivered today. I've got high hopes that the loader will take care of the slow loading issues with the Remington and federal ammo.
I know the colors don't exactly match with the brace, but I don't think anything will. I emailed kel tec about what cerakote would best match the cp33 tan color because I want to cerakote the brace adapter and apparently they don't even know what color it is. All I got from them was that they have 2 different tan colors, a sand color and a coyote tan color. They didn't even specify which one was on the cp33. And from what I've gathered, kel tec tan colors are specifically kel tec. They're not a general cerakote color. Oh well. I'm very happy with the set up and how it looks. I'd really like some feed back on it. As a side note, this is my first post ever. So I'm stil trying to figure all this out.    
|
|
|
|
Posted: 4/17/2020 3:10:30 PM EDT
[Last Edit: HK_DUDE]
[#12]
Looks great. Enjoy!
What ia the distance from rear of brace (when in unfolded position) to face of the trigger? LOP... |
|
|
|
|
Posted: 4/17/2020 4:38:42 PM EDT
[#13]
Quote HistoryOriginally Posted By EDCarbine: The grip is for demonstration purposes only. That aside, I love this gun. It loves CCI 40 gr mini mags and CCI Stingers. So far it's ran the 40gr golden bullet and the federal black pack bulk pack stuff also. Those just seem to need a bit more attention loading the mags. The cci are effortless loading and with the others I've had to really take the time to make sure they don't rim lock. I'm getting 2 more mags and one of the cp33 specific loaders delivered today. I've got high hopes that the loader will take care of the slow loading issues with the Remington and federal ammo. I know the colors don't exactly match with the brace, but I don't think anything will. I emailed kel tec about what cerakote would best match the cp33 tan color because I want to cerakote the brace adapter and apparently they don't even know what color it is. All I got from them was that they have 2 different tan colors, a sand color and a coyote tan color. They didn't even specify which one was on the cp33. And from what I've gathered, kel tec tan colors are specifically kel tec. They're not a general cerakote color. Oh well. I'm very happy with the set up and how it looks. I'd really like some feed back on it. As a side note, this is my first post ever. So I'm stil trying to figure all this out. https://i.imgur.com/SMBlLN5.jpg https://i.imgur.com/vJATCLm.jpg https://i.imgur.com/dN421VJ.jpg https://i.imgur.com/mRU8BSU.jpg That's really, really cool. |
|
|
|
|
Posted: 4/26/2020 12:30:47 PM EDT
[#14]
Just keeping the thread alive..
I had my first OOB in the CP33 this last quick outting. Was running Win M22. I learned another thing in regards to mag loading and feeding. When loading one of my mags with my American loader...there was a stoppage. I had to stop loading and pop a couple rounds out and then finish loading it up. A few needed to be manually adjusted to get the proper stacking. I had a few problems with this mag when firing also. The other mags loaded smoothly from start to finish and shot perfectly. So, whenever I have a funky issue when loading my mag, I plan to empty and start over. If they load perfectly, the fire perfectly. YMMV |
|
|
|
|
Posted: 5/24/2020 12:04:27 PM EDT
[Last Edit: Engineer]
[#15]
Added a TF1913 brace to my CP33:
 Also printed a AFG/handstop/thumbrest off of Thingiverse and it fits quite well:  
|
|
|
|
PA, USA
|
Posted: 5/30/2020 8:39:07 PM EDT
[#16]
Just got it today, it was so bad ass at the range that i picked up a new holosun and painted it all up like how i wanted.
Love it! Gonna brace it soon.  |
|
|
|
Posted: 5/30/2020 11:07:08 PM EDT
[#17]
Quote HistoryOriginally Posted By HaveBlue83: Just got it today, it was so bad ass at the range that i picked up a new holosun and painted it all up like how i wanted. Love it! Gonna brace it soon. https://i.ibb.co/DCqLfF0/IMG-20200530-202550-073.jpg Nice! Congrats! |
|
|
|
|
Posted: 6/2/2020 2:30:46 AM EDT
[#18]
Quote HistoryOriginally Posted By Engineer: Added a TF1913 brace to my CP33: https://i.imgur.com/Ug5qPxY.jpg Also printed a AFG/handstop/thumbrest off of Thingiverse and it fits quite well: https://i.imgur.com/2QDfyoG.jpg https://i.imgur.com/dx6z8FZ.jpg Do you have a link to that grip? It looks pretty good on there. |
|
|
|
|
Posted: 6/2/2020 9:26:19 AM EDT
[#19]
Quote HistoryOriginally Posted By MDStroup: Do you have a link to that grip? It looks pretty good on there. Quote HistoryOriginally Posted By MDStroup: Originally Posted By Engineer: Added a TF1913 brace to my CP33: https://i.imgur.com/Ug5qPxY.jpg Also printed a AFG/handstop/thumbrest off of Thingiverse and it fits quite well: https://i.imgur.com/2QDfyoG.jpg https://i.imgur.com/dx6z8FZ.jpg Do you have a link to that grip? It looks pretty good on there. you will need a 3d printer or someone to print it for you. https://www.thingiverse.com/thing:4237682/files |
|
|
|
|
Posted: 6/2/2020 11:15:14 AM EDT
[#20]
Quote HistoryOriginally Posted By nottooslow:
you will need a 3d printer or someone to print it for you. https://www.thingiverse.com/thing:4237682/files |
|
|
|
|
Posted: 6/2/2020 1:24:07 PM EDT
[#21]
thanks for the heads up on the mlok nuts. ordered.
I am going to print one of these for my buddies CP33 and test it out this weekend. Need to fix my printer first though, wore it out printing ear savers for the nurses I know. |
|
|
|
PA, USA
|
Posted: 6/2/2020 5:39:34 PM EDT
[#22]
I justgot a spool of black for my buddies printer. Gonna do the hand stop and the brace with the rods in it this week/weekend.
|
|
|
|
Posted: 6/3/2020 4:12:17 PM EDT
[#23]
Quote HistoryOriginally Posted By HaveBlue83: I justgot a spool of black for my buddies printer. Gonna do the hand stop and the brace with the rods in it this week/weekend. let me know how the brace goes. Will likely print that too if yours tursns out well. |
|
|
|
|
Posted: 6/4/2020 12:35:10 AM EDT
[#24]
Definitely want to hear how the brace goes. Is it your own design or one already established?
Also thanks for the link to the grip. Still sorting out my 3d printer situation. |
|
|
|
|
Posted: 6/4/2020 9:26:57 AM EDT
[#25]
@Engineer
I printed a couple of these up for my buddy and just noticed in your picture, the back of yours is contoured to fit the trigger guard area. The ones i printed are flat. Unfortunately i wont get to try these out until tomorrow. just wondering if the STL file i linked previously was actually the one you used or if you had a better one?  Attached FileI also have to figure out that missing line. Thought it was a clog so i printed another but it was still there. Going to try to slice it in Cura, used the Creality slicer first. Thanks for any input. |
|
|
|
|
Posted: 6/4/2020 10:27:09 AM EDT
[#26]
Quote HistoryOriginally Posted By nottooslow: @Engineer I printed a couple of these up for my buddy and just noticed in your picture, the back of yours is contoured to fit the trigger guard area. The ones i printed are flat. Unfortunately i wont get to try these out until tomorrow. just wondering if the STL file i linked previously was actually the one you used or if you had a better one? https://www.AR15.Com/media/mediaFiles/292796/cp33_hs_jpg-1446333.JPG I also have to figure out that missing line. Thought it was a clog so i printed another but it was still there. Going to try to slice it in Cura, used the Creality slicer first. Thanks for any input. @nottooslow The STL file with the contoured profile is in the Files - should be the last one (afg_trigger_profile.stl) - it's got some texturing on the front so you might want to print with supports and slow your feed rate down in the beginning until those are done. I sliced mine with the Prusa slicer and added support blockers on the AFG area so I didn't have to clean it up later on. I also printed mine on an Ender 3.  Attached File |
|
|
|
|
Posted: 6/4/2020 10:40:21 AM EDT
[#27]
Thanks found the contoured file.
I sliced it in Cura with a 60% gyroid infill and the print was almost 12 hours. backed it down to 20% and it came down to 6 hours. Figure if I like it, i will make a 100% one out of PTEG. |
|
|
|
SC, USA
|
Posted: 7/4/2020 8:11:02 AM EDT
[Last Edit: BLACKRIFLEREVIEW]
[#28]
Happy 4th of July to all our Patriots of our Republic. Well, I found a CP33 and finally purchased here it is with my Ruger 10/22.
It's not fun to load the magazine and you must do it properly or it will malfunction. Here is my 33 shot group at 25 yards. Today I will do a YOUTUBE review today.  " /> " />The only .22 ammo I shoot is the CCI BRAND COPPER PLATED I find the 40 grain more accurate than the 32 grain.  " /> " />https://youtu.be/78js3IZSX8o |
|
|
SC, USA
|
Posted: 7/4/2020 8:29:19 AM EDT
[#29]
Quote HistoryOriginally Posted By HK_DUDE: Nice find...congrats! I had mine out yesterday. Ran 150 problem feee rounds. Love this little gun! https://www.AR15.Com/media/mediaFiles/3591/20200314_215314_jpg-1316473.JPG Can you provide links for your brace and foregrip I like your set up and want to set mine up the same way? |
|
|
SC, USA
|
Posted: 7/6/2020 11:57:23 AM EDT
[#30]
Quote HistoryOriginally Posted By evnash: New toy. Budget red dot , stippled grip, safety, charging handle. Next will be a fs1913 folding brace. Also made a Kydex owb holster that uses a combat loop for belt attachment. Print is black leather look. For the grip stipple, I only stippled the raised squares but I continued the squares on the front and back strap. https://www.AR15.Com/media/mediaFiles/222048/0B83838F-220F-48EF-B56E-2A0C472E594D_jpe-1287128.JPG https://www.AR15.Com/media/mediaFiles/222048/B81F73AB-1FAF-46B6-8FB8-3BA86CF803BF_jpe-1287126.JPGhttps://www.AR15.Com/media/mediaFiles/222048/A3EF362F-0C67-4594-90FE-E5BED63BAB11_jpe-1287127.JPG Nice Job do you sell a holster like the one you made ? |
|
|
SC, USA
|
Posted: 7/6/2020 11:59:22 AM EDT
[#31]
Quote HistoryOriginally Posted By HK_DUDE: Nice find...congrats! I had mine out yesterday. Ran 150 problem feee rounds. Love this little gun! https://www.AR15.Com/media/mediaFiles/3591/20200314_215314_jpg-1316473.JPG can you post a link for the foregrip and the brace, please . Thanks |
|
|
SC, USA
|
Posted: 7/6/2020 12:10:50 PM EDT
[#32]
YOUTUBE REVIEW https://youtu.be/oOkXW0GTSDY
What .22 Rifle did Bella Twin use to Kill a World Record Grizzly in 1953? https://www.ammoland.com/2014/11/what-22-rifle-did-bella-twin-use-to-kill-a-world-record-grizzly-in-1953/#axzz6RQl09I00 An Alternate Look at Handgun Stopping Power https://www.activeresponsetraining.net/an-alternate-look-at-handgun-stopping-power Take a peek at the .22LR its impressive. |
|
|
|
Posted: 7/6/2020 3:26:28 PM EDT
[Last Edit: HK_DUDE]
[#33]
Quote HistoryOriginally Posted By BLACKRIFLEREVIEW: can you post a link for the foregrip and the brace, please . Thanks Quote HistoryOriginally Posted By BLACKRIFLEREVIEW: Originally Posted By HK_DUDE: Nice find...congrats! I had mine out yesterday. Ran 150 problem feee rounds. Love this little gun! https://www.AR15.Com/media/mediaFiles/3591/20200314_215314_jpg-1316473.JPG can you post a link for the foregrip and the brace, please . Thanks brace front grip The grip is stark industries AFG. I had to modify a Magpul MLOK polymere rail to attach it. I still use the brace, but have ditched the foregrip. |
|
|
|
SC, USA
|
Posted: 7/6/2020 9:01:27 PM EDT
[#34]
Quote HistoryOriginally Posted By HK_DUDE: brace front grip The grip is stark industries AFG. I had to modify a Magpul MLOK polymere rail to attach it. I still use the brace, but have ditched the foregrip. THANK YOU |
|
|
|
Posted: 7/6/2020 9:10:10 PM EDT
[#35]
Has anyone found a molle mag pouch that fits cp33 mags?
|
|
|
|
|
Posted: 7/7/2020 9:14:45 AM EDT
[Last Edit: CFletch]
[#36]
Quote HistoryOriginally Posted By BigReb: Has anyone found a molle mag pouch that fits cp33 mags? ETA: One like this: http://www.amazon.com/Leatherman-MOLLE-Compatible-X-Large-Sheath/dp/B004FKUCXQ |
|
|
|
|
Posted: 7/7/2020 1:44:28 PM EDT
[#37]
Quote HistoryOriginally Posted By CFletch: Do you happen to have a molle Leatherman multi-tool pouch sitting around? I've had good luck with those fitting pretty much any pistol mag, even extra-wide ones. They used to be extremely cheap on Amazon. I'm afraid I don't have a CP33 mag on hand to test, though. ETA: One like this: http://www.amazon.com/Leatherman-MOLLE-Compatible-X-Large-Sheath/dp/B004FKUCXQ Looks like what the doctor ordered. Thanks bro. 
|
|
|
|
|
Posted: 7/11/2020 8:36:06 PM EDT
[#38]
I have been very happy with my CP33 so far. I put a few hundred rounds of Minimags through it and now it seems to cycle everything just fine.
I really want to put a light underneath the barrel. I have the MLok picatinny rail, but none of my lights line up with the trigger guard properly. Has anyone found a weapon light that mounts under the barrel adequately?  Attached File |
|
|
|
USA
|
Posted: 7/12/2020 12:53:11 AM EDT
[Last Edit: seattlite]
[#39]
Quote HistoryOriginally Posted By MXDan1: I have been very happy with my CP33 so far. I put a few hundred rounds of Minimags through it and now it seems to cycle everything just fine. I really want to put a light underneath the barrel. I have the MLok picatinny rail, but none of my lights line up with the trigger guard properly. Has anyone found a weapon light that mounts under the barrel adequately? https://www.AR15.Com/media/mediaFiles/97743/20200711_203103_jpg-1499673.JPG Nope...there is a gap: 
|
|
|
|
Posted: 7/12/2020 4:31:07 PM EDT
[#40]
Quote HistoryOriginally Posted By seattlite: Nope...there is a gap: https://lh3.googleusercontent.com/pw/ACtC-3c-bcCxWP5kI6gjXlwAOns2W5HaLL5175HG6uGEWn8wsBbeB1Rqb8sjqY3Pi8xcdrsKhk3l-ORNLiDU0sMWCQ9WZJt-89Wr40ATeDBlf_p_irIM7R4tgPcmOk48wH5YmtvKA_0F-fZSrfNe51YwnuzJIA=w1442-h606-no Yup. That is annoying. Seems like a silly oversight by KelTec. |
|
|
|
|
Posted: 7/16/2020 6:52:10 AM EDT
[#41]
Quote HistoryOriginally Posted By seattlite: Nope...there is a gap: https://lh3.googleusercontent.com/pw/ACtC-3c-bcCxWP5kI6gjXlwAOns2W5HaLL5175HG6uGEWn8wsBbeB1Rqb8sjqY3Pi8xcdrsKhk3l-ORNLiDU0sMWCQ9WZJt-89Wr40ATeDBlf_p_irIM7R4tgPcmOk48wH5YmtvKA_0F-fZSrfNe51YwnuzJIA=w1442-h606-no Details on the tail hook set up for this platform? That is exactly what I need to do. |
|
|
|
|
Posted: 7/16/2020 9:33:58 AM EDT
[#42]
Quote HistoryOriginally Posted By naes: Details on the tail hook set up for this platform? That is exactly what I need to do. Quote HistoryOriginally Posted By naes: Originally Posted By seattlite: Nope...there is a gap: https://lh3.googleusercontent.com/pw/ACtC-3c-bcCxWP5kI6gjXlwAOns2W5HaLL5175HG6uGEWn8wsBbeB1Rqb8sjqY3Pi8xcdrsKhk3l-ORNLiDU0sMWCQ9WZJt-89Wr40ATeDBlf_p_irIM7R4tgPcmOk48wH5YmtvKA_0F-fZSrfNe51YwnuzJIA=w1442-h606-no Details on the tail hook set up for this platform? That is exactly what I need to do. http://farrow.tech/keltec-cp33-telescoping-brace-adapter/ |
|
|
|
|
Posted: 7/16/2020 11:55:12 AM EDT
[#43]
Quote HistoryOriginally Posted By BLACKRIFLEREVIEW: Happy 4th of July to all our Patriots of our Republic. Well, I found a CP33 and finally purchased here it is with my Ruger 10/22. It's not fun to load the magazine and you must do it properly or it will malfunction. Here is my 33 shot group at 25 yards. Today I will do a YOUTUBE review today. The only .22 ammo I shoot is the CCI BRAND COPPER PLATED I find the 40 grain more accurate than the 32 grain. https://youtu.be/78js3IZSX8o Quote HistoryOriginally Posted By BLACKRIFLEREVIEW: Happy 4th of July to all our Patriots of our Republic. Well, I found a CP33 and finally purchased here it is with my Ruger 10/22. It's not fun to load the magazine and you must do it properly or it will malfunction. Here is my 33 shot group at 25 yards. Today I will do a YOUTUBE review today. The only .22 ammo I shoot is the CCI BRAND COPPER PLATED I find the 40 grain more accurate than the 32 grain. https://youtu.be/78js3IZSX8o Folks who produce YouTube videos should buy a membership so they can post their own videos: April:  KELTEC CP33 REVIEW July:  KELTEC CP 33 22LR PISTOL REVIEW And learn how to post pics. Originally Posted By MXDan1: Originally Posted By seattlite: Nope...there is a gap: https://lh3.googleusercontent.com/pw/ACtC-3c-bcCxWP5kI6gjXlwAOns2W5HaLL5175HG6uGEWn8wsBbeB1Rqb8sjqY3Pi8xcdrsKhk3l-ORNLiDU0sMWCQ9WZJt-89Wr40ATeDBlf_p_irIM7R4tgPcmOk48wH5YmtvKA_0F-fZSrfNe51YwnuzJIA=w1442-h606-no Yup. That is annoying. Seems like a silly oversight by KelTec. Why does a gap matter? |
|
|
|
|
Posted: 7/28/2020 10:39:33 PM EDT
[#44]
I picked up a CP33 today at my local shop. It had been sitting in the display cabinet for 2-3 months and was getting lonely so I took it home and put it in the safe next to my PMR30 and CMR30. I paid $400 OTD for the CP33. I put a Swampfox Kingslayer red dot on it that was on my S&W 22A. Now to get out and shoot it.
 Attached File |
|
|
|
|
Posted: 7/28/2020 10:41:34 PM EDT
[#45]
Nice purchase. I think you got a very fair deal.
|
|
|
|
|
Posted: 7/28/2020 10:50:39 PM EDT
[#46]
Quote HistoryOriginally Posted By HK_DUDE: Nice purchase. I think you got a very fair deal. |
|
|
|
|
Posted: 7/28/2020 10:54:42 PM EDT
[#47]
I over paid on my black one because I bought the first one I saw online..paid around $550 delivered, but that is OK. I really like it.
|
|
|
|
|
Posted: 7/28/2020 10:58:18 PM EDT
[#48]
I wasn't really looking to buy a CP33 but it just looked sad stuck in the corner of the case by itself for a few months. Plus I'm happy with the price I got it for. I'm sure that it will be as fun as my PMR and CMR have been for me.
|
|
|
|
|
Posted: 8/6/2020 2:18:46 PM EDT
[#49]
I'm going to pick up a CP33 tomorrow. Any of ya'll squirrel hunted with these yet? I'm looking at getting this to potentially replace my 10/22 for tree rat and raccoon hunting.
|
|
|
|
USA
|
Posted: 8/11/2020 7:08:31 PM EDT
[Last Edit: seattlite]
[#50]
Quote HistoryOriginally Posted By MXDan1: I have been very happy with my CP33 so far. I put a few hundred rounds of Minimags through it and now it seems to cycle everything just fine. I really want to put a light underneath the barrel. I have the MLok picatinny rail, but none of my lights line up with the trigger guard properly. Has anyone found a weapon light that mounts under the barrel adequately? https://www.AR15.Com/media/mediaFiles/97743/20200711_203103_jpg-1499673.JPG This light lines up with the trigger guard...but not sure I like that gap: 
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
