Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Page / 38
Link Posted: 2/23/2021 7:04:12 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By HK45USER:

You can't write g code?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By HK45USER:
Originally Posted By 7255:
Cura is a slicer which will turn the STL file for the 3D model you have into a gcode the machine will understand. It's honestly about the best out there, and comes with preloaded profiles for popular printers, like the Creality family of printers, including the Ender3.

You can't write g code?

I probably could, it's just been a while 🤷‍♂️
Link Posted: 2/23/2021 7:05:09 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:

View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:
Originally Posted By 7255:
So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62.

And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool.


Yes?
Link Posted: 2/23/2021 7:06:43 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Kalahnikid:
It just kinda dawned on me but.....where the hell's phurba been?
View Quote

Helping his new wife through multiple surgeries. I think they're finally back home though.
Link Posted: 2/23/2021 7:09:10 AM EST
Link Posted: 2/23/2021 7:13:50 AM EST
Discussion ForumsJump to Quoted PostQuote History

Im about it
Link Posted: 2/23/2021 7:14:55 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:

We are talking about sex, right?
View Quote

Something like that
Link Posted: 2/23/2021 7:16:16 AM EST
I'm up. I'm fed. Cup of coffee or two before work.
Link Posted: 2/23/2021 7:21:02 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By smokedoff:

And asks for more
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By smokedoff:
Originally Posted By alphajaguars:
Originally Posted By Twisted10:
Originally Posted By alphajaguars:

You were at work.

So yes. You missed it.



Probably.  About to start another 10hr day

Your boss sucks moose cock.

And asks for more

Link Posted: 2/23/2021 7:21:32 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:

Yes?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62.

And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool.


Yes?

Just think that's cool
Link Posted: 2/23/2021 7:22:40 AM EST
Morning.  
Link Posted: 2/23/2021 7:28:31 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Wodstock:
Morning.  
View Quote



Why the sad face?
Link Posted: 2/23/2021 7:28:44 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Wodstock:
Morning.  
View Quote



Why the sad face?
Link Posted: 2/23/2021 7:29:15 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Naamah:

With his woman
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Naamah:
Originally Posted By Kalahnikid:
It just kinda dawned on me but.....where the hell's phurba been?

With his woman

The one with cancer?!
Link Posted: 2/23/2021 7:29:44 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:
I'm up. I'm fed. Cup of coffee or two before work.
View Quote

What did you eat
Link Posted: 2/23/2021 7:29:45 AM EST
Link Posted: 2/23/2021 7:30:08 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Wodstock:
Morning.  
View Quote

What’s wrong?
Link Posted: 2/23/2021 7:30:26 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:

Helping his new wife through multiple surgeries. I think they're finally back home though.
View Quote

Wife?!?!?!?!
Link Posted: 2/23/2021 7:37:25 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Kalahnikid:

The one with cancer?!
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Kalahnikid:
Originally Posted By Naamah:
Originally Posted By Kalahnikid:
It just kinda dawned on me but.....where the hell's phurba been?

With his woman

The one with cancer?!

Link Posted: 2/23/2021 7:37:34 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Kalahnikid:

Wife?!?!?!?!
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Kalahnikid:
Originally Posted By 7255:

Helping his new wife through multiple surgeries. I think they're finally back home though.

Wife?!?!?!?!

I wasn't going to drop that bomb before he got back here to tell you fruits about it.
Link Posted: 2/23/2021 7:37:59 AM EST
But Lube has zero fucks to give
Link Posted: 2/23/2021 7:44:07 AM EST
Link Posted: 2/23/2021 7:44:30 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:

Just think that's cool
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62.

And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool.


Yes?

Just think that's cool

It'll be a lot cooler if it holds up to abuse.
Link Posted: 2/23/2021 7:45:04 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Wodstock:
Morning.  
View Quote

Link Posted: 2/23/2021 7:49:06 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:
But Lube has zero fucks to give
View Quote

We all congratulated him at Christmas on the engagement, I figured this was a natural progression

When he popped in the other day, I meant to congratulate him anyways, but I forgot
Link Posted: 2/23/2021 7:50:07 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:

It'll be a lot cooler if it holds up to abuse.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62.

And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool.


Yes?

Just think that's cool

It'll be a lot cooler if it holds up to abuse.

Very true.

Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer?
Link Posted: 2/23/2021 7:50:13 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By smokedoff:

What did you eat
View Quote

2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich.
Link Posted: 2/23/2021 7:50:31 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By midnitecreeper:
How the hell doe  that even happen
View Quote

Could have hit something and dented the shaft which, in turn, weakened the shaft and allowed it to twist under load.
Link Posted: 2/23/2021 7:50:57 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:

We all congratulated him at Christmas on the engagement, I figured this was a natural progression

When he popped in the other day, I meant to congratulate him anyways, but I forgot
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:
Originally Posted By alphajaguars:
But Lube has zero fucks to give

We all congratulated him at Christmas on the engagement, I figured this was a natural progression

When he popped in the other day, I meant to congratulate him anyways, but I forgot

I must have missed the announcement over Christmas. I had no idea until I saw Chef's post on fb
Link Posted: 2/23/2021 7:52:33 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:

I need to check the box stores for a carbine buffer assembly
View Quote

I've got a standard buffer, a safety selector, and an end plate at home. No tube. No spring.

You need?
Link Posted: 2/23/2021 7:53:09 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:

Very true.

Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62.

And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool.


Yes?

Just think that's cool

It'll be a lot cooler if it holds up to abuse.

Very true.

Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer?

The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues.

I think how they've done it works. We'll find out.
Link Posted: 2/23/2021 7:53:35 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:

2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:
Originally Posted By smokedoff:

What did you eat

2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich.

Sounds good to me
Link Posted: 2/23/2021 7:53:49 AM EST
Time for the twerking
Link Posted: 2/23/2021 7:54:24 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:
But Lube has zero fucks to give
View Quote

Typical Lube.

Who got married?
Link Posted: 2/23/2021 7:54:31 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:

The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues.

I think how they've done it works. We'll find out.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62.

And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool.


Yes?

Just think that's cool

It'll be a lot cooler if it holds up to abuse.

Very true.

Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer?

The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues.

I think how they've done it works. We'll find out.



You going to run it 5.56 or 6.8?
Link Posted: 2/23/2021 7:54:39 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By MCW:

I've got a standard buffer, a safety selector, and an end plate at home. No tube. No spring.

You need?
View Quote

I've got an lpk, all I need is the buffer tube, spring, castle nut, and buffer
Link Posted: 2/23/2021 7:54:50 AM EST






Link Posted: 2/23/2021 7:56:04 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By smokedoff:

Sounds good to me
View Quote

Very delicious. Usually I fry the patties fresh and then fry the flat side of the egg in the grease but I just did ready to eat sausages today
Link Posted: 2/23/2021 7:56:22 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:



You going to run it 5.56 or 6.8?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
Originally Posted By alphajaguars:
Originally Posted By 7255:
So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62.

And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool.


Yes?

Just think that's cool

It'll be a lot cooler if it holds up to abuse.

Very true.

Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer?

The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues.

I think how they've done it works. We'll find out.



You going to run it 5.56 or 6.8?

Start with 5.56, may eventually put some 6.8 through it.
Link Posted: 2/23/2021 7:57:07 AM EST
Link Posted: 2/23/2021 7:58:53 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:

I've got an lpk, all I need is the buffer tube, spring, castle nut, and buffer
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:
Originally Posted By MCW:

I've got a standard buffer, a safety selector, and an end plate at home. No tube. No spring.

You need?

I've got an lpk, all I need is the buffer tube, spring, castle nut, and buffer

Idk if it would make it to you in time, but damage industries has spring, buffer, end plate, and castle nut for $25.  Usually free shipping too.
Link Posted: 2/23/2021 7:59:22 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:

Very delicious. Usually I fry the patties fresh and then fry the flat side of the egg in the grease but I just did ready to eat sausages today
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:
Originally Posted By smokedoff:

Sounds good to me

Very delicious. Usually I fry the patties fresh and then fry the flat side of the egg in the grease but I just did ready to eat sausages today

I nuked some frozen egg bite things.
Link Posted: 2/23/2021 7:59:57 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By smokedoff:

Idk if it would make it to you in time, but damage industries has spring, buffer, end plate, and castle nut for $25.  Usually free shipping too.
View Quote

That's a helpful lead. Thank you.
Link Posted: 2/23/2021 8:00:07 AM EST
I also have those parts in my box, I could get them in the mail tomorrow, still dunno if it would get to you in time.  Didn’t you say you wanted it for this weekend?
Link Posted: 2/23/2021 8:00:42 AM EST
Link Posted: 2/23/2021 8:02:25 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By smokedoff:

I nuked some frozen egg bite things.
View Quote

Those could be good too
Link Posted: 2/23/2021 8:03:17 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:

Those could be good too
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:
Originally Posted By smokedoff:

I nuked some frozen egg bite things.

Those could be good too

I think they’re by lean cuisine, but they’re delish
Link Posted: 2/23/2021 8:03:57 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 7255:

The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues.

I think how they've done it works. We'll find out.
View Quote

I have a standard A2 grip too....
Link Posted: 2/23/2021 8:04:57 AM EST
Link Posted: 2/23/2021 8:05:04 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By smokedoff:
I also have those parts in my box, I could get them in the mail tomorrow, still dunno if it would get to you in time.  Didn’t you say you wanted it for this weekend?
View Quote

Saturday
Link Posted: 2/23/2021 8:07:44 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:

2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jasonTTKA:
Originally Posted By smokedoff:

What did you eat

2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich.

Ahh so a sausage patty in a roll.
Page / 38
Top Top