User Panel
Posted: 1/25/2021 2:37:33 AM EDT
They come with a warning label.
Also did some in black and added white color fill to make them look like the Jolly Roger. Stamping them after they are casted is okay, next batch I will heat up the stamper with the casting pot and they should melt cleanly into the lead. Almost did the punisher skull, will probably do that for punishing loads. Attached File Attached File Attached File |
|
Where you get the stamp to make that fit on the bullet?
Assuming 3d print? |
|
Quoted: Where you get the stamp to make that fit on the bullet? Assuming 3d print? View Quote 6mm stamp. The face of the bullet is 9mm. $10.99 eBay. Skull stamper |
|
|
|
Fortunately, according to testing I've read, defects to the nose rarely effect accuracy much.
The base is the most critical part. |
|
The hot stamp isn't going to work out. I say that as someone with a lot of experience soldering. Just stamp them cold.
|
|
Quoted: Try harder, OP. https://live.staticflickr.com/65535/49975623567_fa2b1a9160_z.jpg https://live.staticflickr.com/65535/49974842038_f59f98f0eb_z.jpg View Quote Holy fuck, he might as well just throw the damn gun at his target. |
|
If you stamp the punisher logo into them, you could sell them at a gun show for $20 a round right now.
|
|
Quoted: Try harder, OP. https://live.staticflickr.com/65535/49975623567_fa2b1a9160_z.jpg https://live.staticflickr.com/65535/49974842038_f59f98f0eb_z.jpg View Quote That would be the punisher load. Holy crap. I may have to eventually start reloading for my 45–70 |
|
Based on thread title I was expecting drilled out nose cavity filled with snake venom and sealed over.
|
|
|
Quoted: Try harder, OP. https://live.staticflickr.com/65535/49975623567_fa2b1a9160_z.jpg https://live.staticflickr.com/65535/49974842038_f59f98f0eb_z.jpg View Quote Hopefully subsonic? |
|
|
Quoted: Or the old standby, fill the hole with mercury. That way even if you hit them in the leg it's fatal. View Quote View All Quotes View All Quotes Quoted: Quoted: Based on thread title I was expecting drilled out nose cavity filled with snake venom and sealed over. Or the old standby, fill the hole with mercury. That way even if you hit them in the leg it's fatal. Or pull a Roy Scheider Jaws 2 and fill them with cyanide. |
|
|
RL7? I have some gas checked 405s that run pretty slow but you can shoot them all day with the hybrid suppressor. The 325 FTX load is the ass kicker, but I can't get the speeds like the manual suggests.
|
|
Quoted: Based on thread title I was expecting drilled out nose cavity filled with snake venom and sealed over. View Quote And Im just as dissapointed as when I found out the rattlesnake bites at Texas Roadhouse contain no rattlesnake. |
|
I clicked on this thinking you had the Rona and coughed in each case before loading....
|
|
|
Quoted: Try harder, OP. https://live.staticflickr.com/65535/49975623567_fa2b1a9160_z.jpg https://live.staticflickr.com/65535/49974842038_f59f98f0eb_z.jpg View Quote |
|
Quoted: Try harder, OP. https://live.staticflickr.com/65535/49975623567_fa2b1a9160_z.jpg https://live.staticflickr.com/65535/49974842038_f59f98f0eb_z.jpg View Quote @35Whelen700 Damn...what kind of velocity are you loading those to? |
|
|
|
OP you are not a man until you wince in pain from a paper patched 500gr bullet!
|
|
|
Now smear poop into the skull face with your fingers. It'll be like a punji stake.
Victim will die of infection, just in case 405 @ 1500 doesn't get 'em. |
|
Quoted: Try harder, OP. https://live.staticflickr.com/65535/49975623567_fa2b1a9160_z.jpg https://live.staticflickr.com/65535/49974842038_f59f98f0eb_z.jpg View Quote What kind of load could be sent out of a Marlin 1895 with those? |
|
I thought it was a Peep n Bones stamp.
Slightly disappoint. Pretty badass though. |
|
Quoted: Try harder, OP. https://live.staticflickr.com/65535/49975623567_fa2b1a9160_z.jpg https://live.staticflickr.com/65535/49974842038_f59f98f0eb_z.jpg View Quote HA! I’m such a cheep skate I’d melt the lead from those bullets and make 2x as many 330gr HP bullets! |
|
Quoted: That would be the punisher load. Holy crap. I may have to eventually start reloading for my 45–70 View Quote View All Quotes View All Quotes Quoted: That would be the punisher load. Holy crap. I may have to eventually start reloading for my 45–70 Not always. Heavy for caliber bullets shoot much slower and can actually have less felt recoil. That bullet out of a 45-120 or 458 mag would be stupid painful. But out of a 45-70? Maybe 950 fps? A 405gr bullet going 1600 fps would probably have more felt recoil. |
|
Quoted: RL7? I have some gas checked 405s that run pretty slow but you can shoot them all day with the hybrid suppressor. The 325 FTX load is the ass kicker, but I can't get the speeds like the manual suggests. View Quote That’s my main powder, I have a bunch of imr 4227 I’m using up. 1450-1575fps 31-34gr is the powder range. 45-70 is not fun to develop loads for. You have to stand and use a shooting stick. I’ve tried bench shooting.... By round 7, I saw stars. It was beautiful. |
|
Quoted: Holy fuck, he might as well just throw the damn gun at his target. View Quote View All Quotes View All Quotes Quoted: Holy fuck, he might as well just throw the damn gun at his target. I have some of those. They make good subs loaded with Unique but they don't leave room for enough powder to do anything interesting. Shown with a 405. Attached File |
|
Quoted: That’s my main powder, I have a bunch of imr 4227 I’m using up. 1450-1575fps 31-34gr is the powder range. 45-70 is not fun to develop loads for. You have to stand and use a shooting stick. I’ve tried bench shooting.... By round 7, I saw stars. It was beautiful. View Quote View All Quotes View All Quotes Quoted: Quoted: RL7? I have some gas checked 405s that run pretty slow but you can shoot them all day with the hybrid suppressor. The 325 FTX load is the ass kicker, but I can't get the speeds like the manual suggests. That’s my main powder, I have a bunch of imr 4227 I’m using up. 1450-1575fps 31-34gr is the powder range. 45-70 is not fun to develop loads for. You have to stand and use a shooting stick. I’ve tried bench shooting.... By round 7, I saw stars. It was beautiful. I lucked out. When I got my WM special Marlin 45-70, i loaded up a bunch of WW PC 405s with BCL2. Buddy has a shooting rest that you velcro strap the gun into. Strap the gun in, adjust the gun to meet the target, trip trigger. I could not imagine shooting 5 five shot groups out of that gun in one day. |
|
|
Quoted: They come with a warning label. Also did some in black and added white color fill to make them look like the Jolly Roger. Stamping them after they are casted is okay, next batch I will heat up the stamper with the casting pot and they should melt cleanly into the lead. Almost did the punisher skull, will probably do that for punishing loads. https://www.ar15.com/media/mediaFiles/170028/2DACD962-0A86-4A75-AB36-977EA7C91D12_jpe-1795850.JPG https://www.ar15.com/media/mediaFiles/170028/2CCCDB91-5389-4F40-998F-D8AF82A3CFE8_jpe-1795851.JPG View Quote Creative. I love it! |
|
Is that legal in California? Seems extra deadly
Did you cast the bullets yourself? That's pretty awesome. |
|
|
Quoted: Try harder, OP. https://live.staticflickr.com/65535/49975623567_fa2b1a9160_z.jpg https://live.staticflickr.com/65535/49974842038_f59f98f0eb_z.jpg View Quote How fast can you push those? I have a box of the 2050fps 405gr Grizzly load but haven't shot them yet. For factory ammo I am partial to the Underwood 430s at 1550 fps. |
|
Link doesn't work. I want a stamp with a smiley face. Have a nice day.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.