User Panel
Posted: 5/11/2020 2:51:39 AM EDT
I've cleared a bunch of brush off my property and I have a bunch of 1-2" stubs or stumps that are about 3" tall. I would like to get these down flush with the soil. I don't have a tractor and I'm going to guess there is 150ish of them in number. I'm laid off so time is on my side. I am willing to budget $200 for tools to do this but I'd be happier spending less.
Any suggestions before I'm reduced to getting some hatchets and enforcing child labor with my offspring? |
|
You probably need to rent a bobcat. Its actually easier if you leave more of it to get hold of. There are stump grinders also. And since you have nothing but time an axe a shovel and a saw may be your path. Hatchets tend to miss the tree and wind up in the leg unless you know what your doing watch LINK
|
|
Quoted: You probably need to rent a bobcat. Its actually easier if you leave more of it to get hold of. There are stump grinders also. And since you have nothing but time an axe a shovel and a saw may be your path. Hatchets tend to miss the tree and wind up in the leg unless you know what your doing watch LINK View Quote |
|
heavy duty weed wacker with a brush cutter blade?
i use a sthil fs90. |
|
I just use a small chain saw with a sacrificial chain and nub the stumps down flat.
|
|
|
I've done both and would rather use a sawzall since the blades are cheaper plus you don't have to worry about messing up the bar either.
|
|
Originally Posted By chumpmiester: I've done both and would rather use a sawzall since the blades are cheaper plus you don't have to worry about messing up the bar either. View Quote I’d still use a chain saw, with a sacrificial chain and bar. If you have the saw, it’ll be well under your budget. I don’t know how old you are, but my back is already aching thinking about it. |
|
Buy a cheap used lawn mower.
run them over a few times. Maybe lift front of mower and lower slowly on top of stump. |
|
|
if they are far enough away from stuff, people use a coffee can with both ends taken out.
put it around the stump you want gone and put charcol in it and let it burn down. |
|
Get a grubbin’ hoe (Spanish “talache”) and grub those rascals up.
|
|
Quoted: if they are far enough away from stuff, people use a coffee can with both ends taken out. put it around the stump you want gone and put charcol in it and let it burn down. View Quote |
|
Thanks for all the suggestions. I do not have a chainsaw, only a pole saw. Now to get a shit load of coffee cans.
|
|
If you don’t have a chainsaw, do you at least have a decently stout weedeater? I’m thinking the suggestion of a(several) brush blades will be easier on your back and faster than most any other option. Out of the several varieties I’ve tried the Renegade stuff seems to hold up as well or better than anything else. If you buy several at a time you get a worthwhile price break. Since you’ll be deliberately running them into the dirt you’ll go thru them faster than usual. On a decent weedeater/brush trimmer a 3-4” sapling is well within their capabilities.
|
|
Quoted: If you don't have a chainsaw, do you at least have a decently stout weedeater? I'm thinking the suggestion of a(several) brush blades will be easier on your back and faster than most any other option. Out of the several varieties I've tried the Renegade stuff seems to hold up as well or better than anything else. If you buy several at a time you get a worthwhile price break. Since you'll be deliberately running them into the dirt you'll go thru them faster than usual. On a decent weedeater/brush trimmer a 3-4" sapling is well within their capabilities. View Quote |
|
Not sure what kind of blade a chopper attachment is but why not use that instead of the sawzall ? All that time on your knees is gonna be rough on back and knees.
|
|
Quoted: Not sure what kind of blade a chopper attachment is but why not use that instead of the sawzall ? All that time on your knees is gonna be rough on back and knees. View Quote https://www.lowes.com/pd/TrimmerPlus-Brush-Cutter-Attachment/50129056 This thing. It doesn't really cut and it wallowed out rivets in my trimmer shaft. Works great on vines. |
|
Should have just pulled the trees out with a chain and car/truck. Would have been easier in the long run roots and all in one shot.
|
|
Go rent a chainsaw for a half day or a day.
That's what the rentals are for. |
|
Yes, use a sawzall or get a small electric chainsaw. Sawzall may be better from a maintenance standpoint since you'll be getting down in the dirt..use a long bade. The 60v, 16" bar electric chainsaw I got on sale for about $130 last year is perfect for all kinds of small stuff like saplings, limbing, fallen limbs...just grab it and go.
|
|
|
Battery Recip Saw, Pruning Blades, Tordon. You might go over your budget.
|
|
Mattock.
If you got the time and don’t mind physical work. A mattock/pickaxe will go through 2-3inches of wood in a swing or two. Nothing to ruin. Cheap at under $50. |
|
|
|
|
Quoted: https://www.AR15.Com/media/mediaFiles/69531/8506434D-E60E-4DAB-A34F-BC14063397DF-1413935.jpg Grubbing hoe (The ones i grew up with had an axe/maul on the back side instead of the pick) View Quote |
|
I've had great success with Oregon saw blades on my weed trimmer. I can get the stumps so flush that I never have to worry about hitting them with my mower.
https://www.oregonproducts.com/en/blade%2c-brush-cutter%2c-eia%2c-24-tooth/p/41-932 Also, I've got a cut-off saw (gas-powered circular saw, 12" blade) and using a carbide chip blade (NOT a carbide tooth saw blade) I can plunge into the larger stumps and use it like a mini-stump grinder. |
|
Diablo pruning blade in recip saw is what i just used to remove 3inch stumps at or below ground level...worked great!
|
|
Buy a Pulaski tool (get one with a fiberglass handle) and get busy. It works great for cutting fire lines and it will do what you want as well. Plus you end up with a very useful tool.
|
|
|
Been using this https://www.lowes.com/pd/Kobalt-5-lb-Fiberglass-Handle-Steel-Pick-Mattock/1000377469
Works like a champ. Thanks for the suggestions everyone. |
|
I made a brush grubber that works great for small stuff, it will pull up to about a 3" pine but it takes more ass than I have. I patterned it off the Pullerbear tools. I should have just bought one but I thought I could make it cheaper, I was wrong.
|
|
Sawsall
You cut them too short to pull out with a high lift jack and a short chain. |
|
It ain't cheap ($340 an hour, about 3/4 acre an hour), minimum one day's time, but this works.
Grinding Head by FredMan, on Flickr Grinding Head by FredMan, on Flickr DSC 1226 54 9 Grinding |
|
I picked up a 18" poulan pro chainsaw at Ollie's (like a biglots) today that came with a extra chain for an awesome price. Now I can lop the stumps flush too.
|
|
|
Progress is going awesome, I've removed probably 95% of them. The axe is definitely the best tool but not the way I thought it would be. It works best coming in slightly past the stub and getting under the root and leveraging it out. Sometimes I have to chop a runner or two but even the big ones can be dug out.
I have about three tree stumps to remove and I bought a fire ring from tsc and I found charcoal on sale for $5 a 14# bag sooo I bought 8 bags and stump number 1 is currently smoldering. I've been feeding it all the brush I've raked up.and the vines, oh God the vines. The worst part is the vines, I have thorn vines and regular vines everywhere. They constantly catch the rake and I have to stop and yank them out. |
|
I’m sure your aware of this but be DAMN sure you’re not burning poison ivy. That smoke will seriously mess you up. Oh yeah and let me second the chainsaw chaps. Cheap protection. And in my experience a GOOD fiberglass handles sharp hoe works pretty well on vines. Once it catches on a vine, the sharp edge will often cut the vine runner.
|
|
Appreciate the concern, I have been checking any plant I don't know to make sure I'm not burning poison. I've barely used the chainsaw. I need to order chaps, shame on me.
|
|
Quoted: Appreciate the concern, I have been checking any plant I don't know to make sure I'm not burning poison. I've barely used the chainsaw. I need to order chaps, shame on me. View Quote |
|
https://www.gardenersedge.com/centurion-monster-pro-lopper/p/PRO665/?kc=geshop20n,&mkwid=%7Cdm&pcrid=431407825607&pkw=&pmt=&plc=&prd=PRO665&utm_source=google&utm_term=&utm_campaign=&utm_medium=cpc%7D&slid=&pgrid=105606008852&ptaid=pla-900337431835&gclid=Cj0KCQjwwr32BRD4ARIsAAJNf_0LfepLOCRRm7vi_iACFSs9fAbLZDrZD1_BsF1gDMOekaS916b1LvIaAtF4EALw_wcB
|
|
https://m.northerntool.com/shop/tools/product_200756199_200756199?cm_mmc=Google-LIA&utm_source=Google_LIA&utm_medium=Construction%20%3E%20Concrete%20Pouring%20%2B%20Curing&utm_campaign=Klutch&utm_content=73171&gclid=Cj0KCQjwwr32BRD4ARIsAAJNf_1950P31WnuBjddHXhsh3cE-vfHK1NYIw7WWx9zqbQKKWbddpDw860aAr7oEALw_wcB
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.