User Panel
Quoted:
He's obviously lying. This is another guy that drags rifles through a Barska catalog, dips them in some gaudy camo, and then asks $2500 for them. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
The worst part of it all is he will sell it, for his asking price. These guys are the used car salesmen of the gun world. They prey on uninformed people who are new to guns or at least new to AR's We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ how?!? He's obviously lying. This is another guy that drags rifles through a Barska catalog, dips them in some gaudy camo, and then asks $2500 for them. well ya, I've shot 600yard matches before, that bull is BIG! and the sub MOA groups are as well. |
|
Quoted:
We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ View Quote View All Quotes View All Quotes Quoted:
Quoted:
The worst part of it all is he will sell it, for his asking price. These guys are the used car salesmen of the gun world. They prey on uninformed people who are new to guns or at least new to AR's We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ Bfl infringement? |
|
Quoted: We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ View Quote View All Quotes View All Quotes Quoted: Quoted: The worst part of it all is he will sell it, for his asking price. These guys are the used car salesmen of the gun world. They prey on uninformed people who are new to guns or at least new to AR's We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ Well I can believe its a 1 shot group, fucker destabilized and went through sideways |
|
Quoted:
I have dual monitors, so screenshots take of both screens and I'd have to edit them. It was quicker and easier on my phone and it shows up fine on my phone. And actually I just got a friend to screenshot them for me and send them because I didn't feel like editing them. View Quote View All Quotes View All Quotes Quoted:
Quoted:
pro tip: next time log onto your computer and pull the exchange off of there. Much more readable than screenshots from your phone. that was painful to read I have dual monitors, so screenshots take of both screens and I'd have to edit them. It was quicker and easier on my phone and it shows up fine on my phone. And actually I just got a friend to screenshot them for me and send them because I didn't feel like editing them. Pro tip#2: use Alt + print screen instead of Control+ print screen and you will get only the window that is active. - no editing necessary. |
|
|
I was all like with the rifle but then I scrolled down to the stippled and butchered Kahr and Ruger frames and was like [%|[%|... |
|
|
|
Quoted:
Quoted:
Another one from this same city that went out of business drilled 3 gas port holes in a barrel and stuck an FSB over it, then sold it to my friend. I forgot to get a picture. AWESOME!!!! 3 times the reliability! LaRue, are you listening??? |
|
Quoted:
Quoted:
Another one from this same city that went out of business drilled 3 gas port holes in a barrel and stuck an FSB over it, then sold it to my friend. I forgot to get a picture. AWESOME!!!! 3 times the reliability! Hogging out gas ports for reliability sometimes doesn't cut it. Lets just drill 3 and call it safe! |
|
|
Quoted:
Hogging out gas ports for reliability sometimes doesn't cut it. Lets just drill 3 and call it safe! View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Another one from this same city that went out of business drilled 3 gas port holes in a barrel and stuck an FSB over it, then sold it to my friend. I forgot to get a picture. AWESOME!!!! 3 times the reliability! Hogging out gas ports for reliability sometimes doesn't cut it. Lets just drill 3 and call it safe! in case one gets copper fouled. |
|
Quoted:
Pro tip#2: use Alt + print screen instead of Control+ print screen and you will get only the window that is active. - no editing necessary. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
pro tip: next time log onto your computer and pull the exchange off of there. Much more readable than screenshots from your phone. that was painful to read I have dual monitors, so screenshots take of both screens and I'd have to edit them. It was quicker and easier on my phone and it shows up fine on my phone. And actually I just got a friend to screenshot them for me and send them because I didn't feel like editing them. Pro tip#2: use Alt + print screen instead of Control+ print screen and you will get only the window that is active. - no editing necessary. Thanks And on the topic of pro tips, pressing Control + Shift + T will open up your last closed tab. So if you accidentally close a tab, hit that and it will open back up. |
|
Quoted:
Well I can believe its a 1 shot group, fucker destabilized and went through sideways View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
The worst part of it all is he will sell it, for his asking price. These guys are the used car salesmen of the gun world. They prey on uninformed people who are new to guns or at least new to AR's We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ Well I can believe its a 1 shot group, fucker destabilized and went through sideways Exactly |
|
Quoted:
Bfl infringement? http://nebula.wsimg.com/046fcbdfe619de9901417fb1e7a505da?AccessKeyId=DC98B9AC25386BFD08BF&disposition=0&alloworigin=1 View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
The worst part of it all is he will sell it, for his asking price. These guys are the used car salesmen of the gun world. They prey on uninformed people who are new to guns or at least new to AR's We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ Bfl infringement? http://nebula.wsimg.com/046fcbdfe619de9901417fb1e7a505da?AccessKeyId=DC98B9AC25386BFD08BF&disposition=0&alloworigin=1 Hmmm, maybe so. Which Staff do I send it to for them to check? This guy is a royal douche and he lies about his builds/parts, so I wouldn't mind him getting a letter from the Avilas. |
|
|
|
Quoted:
We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ View Quote View All Quotes View All Quotes Quoted:
Quoted:
The worst part of it all is he will sell it, for his asking price. These guys are the used car salesmen of the gun world. They prey on uninformed people who are new to guns or at least new to AR's We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ Loved this pic from their site: If you don't even know how to properly attach something as simple as a cheek riser, yeah, I don't think I'll have you build my next AR |
|
I've got a shooting friend in Knoxville, wonder if he knows him
|
|
|
I got to say that I love gunsmiths like this fellow. They make me so much work..
|
|
|
|
|
Quoted:
So the only time I've ever seen an AR barrel "bedded" on a youtube video is when someone rubbed a bunch of blue thread locker around the barrel extension. I did that on my second AR and when I had to remove the WOA barrel, I swore I'd never do it again. So that's probably what he means by bedding. View Quote No, he turned down the extension, then added some type of metallic bedding compound. There is nothing difficult about removing a bedded barrel with Blue Loc-tite. Take your T handle and insert it with the receiver in the vice, tap on the back, barrel breaks free without any fuss at all. I do all my rifles with a bedded extension, either with thread locker or thermo-fit. High Power smiths and top tier shops have been doing this for decades. I've seen the performance results with the same components go from 1.5" groups to 3/4" groups and less. |
|
|
Quoted: I have dual monitors, so screenshots take of both screens and I'd have to edit them. It was quicker and easier on my phone and it shows up fine on my phone. And actually I just got a friend to screenshot them for me and send them because I didn't feel like editing them. View Quote View All Quotes View All Quotes Quoted: Quoted: pro tip: next time log onto your computer and pull the exchange off of there. Much more readable than screenshots from your phone. that was painful to read I have dual monitors, so screenshots take of both screens and I'd have to edit them. It was quicker and easier on my phone and it shows up fine on my phone. And actually I just got a friend to screenshot them for me and send them because I didn't feel like editing them. I use dual monitors at work. Click on whichever screen you want to screenshot, then hit CTRL+ALT+PrtScn and it should take a screenshot of only one screen. without the CTRL+ALT it will capture both screens. ETA: beat |
|
|
Forward assist looks like a turned down grade 8 bolt
The improved dust cover seals so well it keeps out moisture. Even from the magwell, trigger slot, upper/lower gap and barrel? Impressive! |
|
I got this far in the thread an no one mentioned beowulfX?
GD, I am disappoint |
|
Quoted:
Loved this pic from their site: <a href="http://smg.photobucket.com/user/hhsmiley/media/wtf_zpsaneyx9uz.png.html" target="_blank">http://img.photobucket.com/albums/v286/hhsmiley/wtf_zpsaneyx9uz.png</a> If you don't even know how to properly attach something as simple as a cheek riser, yeah, I don't think I'll have you build my next AR View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
The worst part of it all is he will sell it, for his asking price. These guys are the used car salesmen of the gun world. They prey on uninformed people who are new to guns or at least new to AR's We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ Loved this pic from their site: <a href="http://smg.photobucket.com/user/hhsmiley/media/wtf_zpsaneyx9uz.png.html" target="_blank">http://img.photobucket.com/albums/v286/hhsmiley/wtf_zpsaneyx9uz.png</a> If you don't even know how to properly attach something as simple as a cheek riser, yeah, I don't think I'll have you build my next AR It's got a buttstock like a 58 Cadillac tail fin |
|
|
|
|
I belong to a local Facebook gun sale/trade page.. this is the start of their rules:
Rule #1 - Don't be a little bitch. If you get butt-hurt over someone calling you out on being a dumb ass or price gouging, grow a pair of balls and take your beating, adjust said misbehavior and carry-on. If you cry about it like a little girl and get sand in your vag, you will be banned.
Rule #2 - Refer to rule #1. View Quote |
|
|
Quoted:
I belong to a local Facebook gun sale/trade page.. this is the start of their rules: View Quote View All Quotes View All Quotes Quoted:
I belong to a local Facebook gun sale/trade page.. this is the start of their rules: Rule #1 - Don't be a little bitch. If you get butt-hurt over someone calling you out on being a dumb ass or price gouging, grow a pair of balls and take your beating, adjust said misbehavior and carry-on. If you cry about it like a little girl and get sand in your vag, you will be banned.
Rule #2 - Refer to rule #1. The group me and my friends run has a very, very similar pinned post. |
|
Is bedding an AR 15 barrel to the upper even a necessary thing to do? Does it even matter?
|
|
|
Quoted:
We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ View Quote View All Quotes View All Quotes Quoted:
Quoted:
The worst part of it all is he will sell it, for his asking price. These guys are the used car salesmen of the gun world. They prey on uninformed people who are new to guns or at least new to AR's We have some BAD ones locally. Here is another gem (look at his ragged 1 hole group at 750yd): http://www.tactical-innovations.com/ WTF? Measuring 5.56 energy in JOULES? |
|
Quoted:
Quoted:
I'd love to know what the "metalized bedding material" is. Bondo w/metal shavings? More than likely . . . Acraglass and atomized steel . . . . Increase Tensile and Compression Strength of Acraglas Gel
Atomized (finely powdered) metals can be added to Acraglas Gel to increase both tensile and compression strength, along with higher impact resistance. This feature allows you to duplex-bed guns using reinforced Acraglas Gel where the recoil lug contacts the bedding and un-reinforced Acraglas Gel or Acraglas for the less stressed areas of the stock. Atomized metals can be added in ratios from 1 part metal to 4 parts mixed bedding , up to 1:1 ratio of metal to bedding mix. We offer five atomized metals: ALUMINUM - Very malleable with excellent machinability for easy drilling, tapping, shaping; STEEL - Offers a full 10% increase in tensile and compression strength over un-reinforced bedding; requires metal working tools for trimming and shaping and is heavier than aluminum; STAINLESS STEEL - All the attributes of steel particles but with a medium gray finish and no fear of rust formation on surface of bedding. |
|
|
Lightening is the exact opposite of what I would want to do with AK carriers. This is what happens when you something without thinking.
|
|
|
I know this "gunsmith." Let me post a picture of his god awful skorpion build. I'll return with pics.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.