$280 1 LBT-6094 G3-L V2 Update w/ 2 x 6x6 side plate pouch (each has 2 slots for mags) COYOTE BROWN
Designed by LBT GBRS Group COLLAB.
Used. This is a new carrier, I inserted some plates into the main pockets for fit check and removed.
Main pockets based around Large 10” x 13” multi-curve SAPI plate 1” thickness and under.
At your request I can also remove the shoulder pads and side plate pockets to slick it down more, to sell the carrier for less, please IM your $ preference.
V2 Update of the G3 Carrier
Front modular panel system includes 3/4" Fast-Clips*
Tiered section with 3 mounting options providing various panel options and fitment
Lightweight rigid cummerbund
LBT-2739Q Side Plate Pockets compatible, included (may be removed at buyers request)
Removable Shoulder Pads with routing slots for comms & hydration (may be removed at buyers request)
Front Admin Pocket: 5W x 5.5H
Reinforced Drag Handle
Body side front and rear is constructed of 4 way stretch with mesh channel center (to accommodate various cuts of armor)
Constructed of 1000D Cordura
Weight: 1.4 lbs
*Will accept 1" Fast-Clips, sold separatelyhttps://ibb.co/mTxkznZ
For better clarity, this is factory pic of the 6 x 6 side plate pouch that also has slots for mags.https://ibb.co/dGdjRtW
For demonstration purposes only, equipment and pouches not included:
An attempt for a streamlined realistic GBRS inspired HKG36 AUG SIG55x Glock18 loadout, work in progress, the possibilities are almost endless!https://ibb.co/8j5Nct0
Another GBRS group inspired slick loadout
9 x AUG mags
9 x Glock 33rd mags
1 x Glock in Holster w/ 33rd Maghttps://ibb.co/8NnqYp8_____________________________________________$300 LBT R/H Crossdraw Holster Tac Entry Vest, OD
Used. OG E/C
Old LBT P/N Label, OOP . Made in USA, not Bangladesh and Vietnam like usual BlackHawk At least twice or more scarce than Eagle and BlackHawk version.
Rear panel has two layered looped fabric all across the back for attaching your ALICE gear and is sewn with lined soft velcro loop-pile inside (for period BTS type pouches etc). Mesh pouch inside facing body presumably for bladder.
Right panel 3 x mag pouches (each may hold 2 x M16 aluminum or 1 x 5.56mm SIG SAN 55x / HK G36 / Steyr AUG 30rd) and one utility pouch above. Zippered compartment on inside facing body.
Left panel Holster with built in pouch and 3 x 15rd 226 sized mag pouches (have old inserts) above. Zippered compartment on inside facing body.
Open muzzle holster can fit 9mm 226, 92FS, G19, etc. some w/ suppressor.
Drag handle, belt loops, non slip pad and mini metal D ring on each shoulder that is adjustable with velcro.
This is a classic trim low profile three panel vest
Each panel is approx 12 inches wide at beltline. Supplied paracord adjustment can expand approx another 3 inches on Right and Left side.
12 Right + 3 Right + 12 Rear + 12 Left + 3 Left = approx 42 inches max along beltline. Keep in mind you will be wearing this over armor. Or clinching it down tight is approx 36 inches along beltline.
You can replace paracord with longer sections for more expansion around king kong but it will not be practical,
I have LBT paracord if needed for this but it is in CB.
Makes a great retro gift for yourself. Unfortunately I'm too big to wear this.
LBT Vest Fronthttps://ibb.co/n8GFS2D
LBT Vest Rearhttps://ibb.co/Ky1tSmZ_____________________________________________$645 LBT 6094 B SLICK XL
Used. OG E/Chttps://ibb.co/XpRqyXbhttps://ibb.co/GWYv34Zhttps://ibb.co/5nmQ4vy_____________________________________________$795 LBT 6094 B Gen II
Used. E/Chttps://ibb.co/ZmFwxnrhttps://ibb.co/0yMxk2Yhttps://ibb.co/c2rkmr4_____________________________________________$60 LBT Strip Slap Charge Pouch Mas Grey
Used. OG E/Chttps://ibb.co/H7vbHCPhttps://ibb.co/0VdsrGc_____________________________________________$215 T.REX Arms Plate Carrier
Size Large. Ranger Green. Has made in USA label. Collectible from first run Dec 2020 offering, just test fitted never taken outside. Used. E/Chttps://ibb.co/LZFQHp8https://ibb.co/9yQ5wj5https://ibb.co/1ZNYgm1https://ibb.co/x2THSqX_____________________________________________$175 Old Woodland Type Shirt and Cap from Mid East
If you collect old woodland patterns this will make a nice addition to your collection and something your friends may not have. Perhaps with the original Pocket Pus*y slit design for endless jokes.
Front armpit to armpit is 21 inches so I assume it's for an approx 40-42 +/- inch chest .
Armpit to sleeve is approx 20 inches
Front top collar button to bottom is approx 27.5 inches
Small cut near cuff.
Measures almost 22 inches around the head band.
Almost reminds me of the style French Lizard Camo caps were shaped.https://ibb.co/bgG7vW8https://ibb.co/4V2q0NShttps://ibb.co/mh8KpBQhttps://ibb.co/zsgzHRp_____________________________________________$395 Helmet
United Shield International Ltd. Spec Ops DELTA Ballistic Helmet Level IIIA Green
Used. E/C I placed some additional disc tape inside helmet more than provided by the Mfg (if you need more let me know) and removed my ear pro so there might be some cuffs from that,. Got this new, but have not even had time to finish setting it up with tape yet at this early stage, to then take out to range. Comes as pictured. The silver ss# label on helmet, matches silver ss# label in booklet.
Details from Mfg/Sales
X-Large Approx Diameter: 7 7/8 - 8 1/2, Circumference: 24 – 26
The United Shield Spec Ops Delta Ballistic Helmet was developed to be the ideal way for military personnel to make sure they have a high quality option for head protection. This Tactical Helmet from the professional engineers at United Shield is made from advanced Aramid composites and provides lightweight robust protection from ballistic and fragmentation projectiles as well as other low energy threats. The United Shield Specs Ops DELTA Ballistic Tactical Helmet comes fitted with a 4 point adjustable harness and the latest impact absorption system from Team Wendy, the Epic Air System. The harness has a split suede chin strap along with a X Style suede neck pad. The harness and pads can be easily removed for cleaning or replacement. The United Shield Spec Ops Ballistic DELTA Helmet comes fitted with a universal NVG mount and Picatinny rails which provide a solid platform for flashlights, cameras and other gear.
Protection against fragments from V50 450m/sec (1480 fps) to V50 700m/sec (2300 fps) according to STANAG 2920 (17gr FSP), US Mil Std 662F and meets or exceeds the US Military fragmentation spec for the ACH combat helmet.
The Spec Ops Delta is designed with the following improvements and enhancements:
Increased area of coverage over the ears and back of the helmet
New harness with running adjusters, soft leather and suede nape, low profile webbing and fasteners
Picatinney rails on either side
Universal NVG mount
New Team Wendy EPIC Air pad and comfort liner
Full NIJ Level IIIA coverage including .44 magnum
High Fragmentation Protection Protection against fragments from V50 1480 ft./sec (450 m/sec) to V50 2300 ft./sec (700 m/sec) according to STANAG 2920 (17gr FSP) and US MIL STD 662F Mfg 09/15
Aramid, PE or hybrid construction
Specifications for United Shield Spec Ops Delta Ballistic Tactical Helmet:
Material: Advanced Aramid Composites
Features of United Shield Special Operations Military Tactical DELTA Helmet:
NIJ level II and IIIA
Protection against fragments from V50 450m/sec (1480 fps) to V50 700m/sec (2300 fps) according to STANAG 2920 (17gr FSP), US Mil Std 662F and meets or exceeds the US Military fragmentation spec for the ACH combat helmet.https://ibb.co/qMZGGfDhttps://ibb.co/Nss4wXHhttps://ibb.co/WDcW7kchttps://ibb.co/0FPSGz7https://ibb.co/gw394Nwhttps://ibb.co/kc4qHwvhttps://ibb.co/RYHccvDhttps://ibb.co/XkLQ8Ymhttps://ibb.co/gMv4v98https://ibb.co/x1Hcwj9https://ibb.co/3zPc1S5https://ibb.co/s9Mft30https://ibb.co/QmYMs9L ___ ___ ___ ___ 2 x 3M Peltor ARC Adapters
If you need them these will go for sale to buyer of helmet or if not desired sold separately if helmet sells.
Just slide wire into your not included SARA Sordins
These UK helmets seem to work best with these adapters.
Never taken outside from incomplete helmet project.
This set was slid off a complete Sordin SARA setup from shop, not sure if the wire part are Unity Tactical or 3M Peltor, please view pics of item to see what is included.https://ibb.co/PhXHKCDhttps://ibb.co/wWxyVdzhttps://ibb.co/hyV85JR_____________________________________________
SWAG$40 each NAVY 8-Point Hat Size 7 3/4
QTY May have at least 3 left if you need more than onehttps://ibb.co/3YyH6mFhttps://ibb.co/JRfTrKp_____________________________________________Belt SOLD to nmitchell * Sat 8/21 Payment received (transferring), PM and email sent confirming shipping address, Thank you
* Sat 8/21 USPS Tracking info site PM'ed and emailed to member
* Mon 8/23 in USPS possession
* Tue 8/24 Tracking results Belt Delivered by USPS August 24, 2021 at 9:18 am, Feedback left for Buyer
$281 1 GBRS Cobra Belt L/XL Multicam NIPhttps://ibb.co/thmTN0w
Stock GBRS Group photos for referencehttps://ibb.co/nMWmRKghttps://ibb.co/MkbgTLNhttps://ibb.co/rHpWj8Qhttps://ibb.co/5sDZb2Shttps://ibb.co/m8D4ZYJhttps://ibb.co/L1GCjPThttps://ibb.co/C0bJ5tmhttps://ibb.co/74v1YXxhttps://ibb.co/qnFtXw3
Maker/Mfg info below, bold red text is my emphasis for your safety.
The GBRS GROUP Assaulter Belt System, was designed and developed by Tier One Operators and made in USA by LBT INC, to fulfill the needs and requirements of Special Operators, Military, Law Enforcement and those that demand the most from their equipment.
Most operator or gun outer belts use multiple layers of rigid materials sewn together with a lightweight and flimsy webbing or binding material to attach equipment to. This typically results in an uncomfortable and overly thick belt with the equipment being secured to a loose and sloppy field.
The GBRS GROUP Assaulter Belt System utilizes a 2 layer outer belt to create a lightweight, flexible yet rigid and stable platform to attach equipment, holsters and accessories. This is done by using Type 13, 1-23/32” belt webbing (7000 lbs tensile strength) as the base, with a field of PALS webbing, laser cut from a semi rigid woven thermo-polymer (patent pending). This ensures that your equipment is always secured to something rigid, while allowing the belt to remain lightweight and comfortable. To round it off, we double “W” stitch the webbing to a load rated, 1.75” Austrialpin Cobra buckle with a D-ring for attaching helo lanyards and other equipment. The outer belt has an inner facing of “loop” style Velcro, to attach to a low profile “hook” inner belt. We did this because hook should never be worn towards body, especially in such a high wear area (belt line).
The inner belt system is actually 2 part. It consists of a low profile “hook” inner belt and a “shroud” to cover the inner belt when the outer Assault belt is not in use. This results in a system that not only doubles as a non-metallic EDC belt, but it is a comfortable and convenient way to cover the scratchy hook portion of the inner belt. When the outer belt is needed, simply remove the inner belt shroud and attach the outer Assaulter belt to the inner belt.
MADE IN USA by LBT INC.
Size L/XL fits waist size 36-42NOT LOAD RATED, CURENTLY UNDERGOING TESTING AND CERTIFICATION
. Although constructed utilizing type 13 belt webbing that’s double “W” stitched, with an 18kN rated cobra D ring buckle, it is not load rated yet. We are currently undergoing testing and certification and will update when we are able. Until we receive the results:
Do not use for rappelling or as a safety restraint of any kind. Failure to adhere to these use and safety warnings may result in serious injury or death.
FREE LIMITED COLLAB STICKERS WITH CURRENT PURCHASE OF GBRS ASSAULTER BELT SYSTEM UNTIL THEY ARE GONE.
Sale Final. Item(s) offered As Is only as potential collectable(s)
No Notes of any kind Please.
PP F&F or G&S + Fees
Might be able to do Zelle as well please ask.
I may have to switch over to Zelle only at anytime.OBO Delivered price matching may be available to get you a fair price.
Prices USPS Priority Mail CONUS AK HI shipping only: My preference is Priority Mail. Depending how items are shipped and reducing box size, the price can differ. To double check, please let me know your zip code to see if the listed price can be reduced further.
For $600+ Items are sold as components, e.g., $600 item will require two separate payments of $300.
After posting in WTS, please IM your complete postage address, I will return IM with PP email and USPS tracking info when shipped.*** I'm not seeing your PM notification unless you post in thread and also send an email to be on the safe side***
USPS does not ship this if no mail received, so please excuse a slight delay.
My old archived listings are n/a / sold, sorry can't edit.
Thanks for looking
Search: T.REX Arms trex arms trexarms platecarrier helmet woodland