First things first, this has been cerakoted. It's far from a perfect job, as this was the first large scale piece I did. It was done in C series Vortex Bronze and was originally Sako Green. There's a few spots where I didn't get good coverage and at least one run on the underside of the handguard. I did my best to capture these spots in pictures. Second, the previous owner dremeled into the chassis where the safety sits because he said his Triggertech wouldn't fit. He removed some material and said it works. I run a Timney and I didn't have any problems with fit. This was bare aluminum, so I hit it with a sharpie and you can barely see it. He also opened up the front action screw hole so his FAT Wrench would fit. My FAT Wrench came with long bits, and they reach just fine. But this does give you options if you don't have them. That seems like a ton of problems, but with the action installed they're barely noticeable.
In addition to the stock itself, also included is an Arca Swiss Spigot mount, two heavy weight steel LOP spacers (.66lb each), three standard LOP spacers, and the short pic rail. The action screws are also included. Inside the forend I installed eight 1oz weights to help balance things out and reduce recoil. These can be removed extremely easily if you don't want them, but they'll be left in place nonetheless. Pictured mag is not included
Price is $400 shipped. Paypal gift or +3%. Email is best for contact. No trades.https://imgur.com/a/OuWAez9