User Panel
User Panel
User Panel
|
Posted: 3/21/2014 7:59:21 AM EST
[Last Edit: Slash]
 UCIW XH Buffer - $125 This Heavy Buffer weighs 5.5 oz, the extra mass helps reduce felt recoil and makes your gun operate more smoothly. Works great to mitigate the side effects of hot hand loads and suppressors. Machined from solid 303 Stainless Steel with a Stainless Steel roll pin for a lifetime of trouble-free performance. The head is polished for an extra smooth finish that won't cause damage to your buffer tube. Tungsten weights inside. Manufactured in the USA by Heavy Buffers, not affiliated in any way with LWRC. These buffers are designed specifically to complement the LWRC Ultra Compact Stock System. You MUST use the LWRC UCIW receiver extension. Attempting to use these buffers in an A2 (rifle) or standard carbine receiver extension will result in damage/injury/mayhem!!! Also available - 8.5 oz. buffer for Pistol Caliber Carbines - UCIW-9 XH Questions? Please contact me via email, NOT IM.  |
|
|
|
AZ, USA
|
Posted: 3/24/2014 4:08:41 AM EST
[#1]
Do these work with NEA stocks?
|
|
|
|
Posted: 3/24/2014 4:53:58 AM EST
[#2]
I'm working on a buffer for the NEA PDW stocks that will work with a standard bolt carrier.
|
|
|
|
|
Posted: 3/24/2014 5:17:55 PM EST
[#3]
I am going to order this buffer but what is the deal with the spring on your website? Is it more powerful or something?
|
|
|
|
|
Posted: 3/24/2014 5:30:03 PM EST
[#4]
You can use the LWRC spring. I'm offering the spring is an option for those who want an extra or don't have the original spring. I feel that round wire springs are superior in many ways, but that's a different discussion for a different day.
|
|
|
|
|
Posted: 4/10/2014 3:01:49 PM EST
[#5]
^
|
|
|
|
|
Posted: 6/2/2014 2:00:56 PM EST
[#6]
^
|
|
|
|
|
Posted: 6/30/2014 6:57:04 PM EST
[#7]
Any more details on the 9mm Ultra compact buffers?
I couldn't find any other posts. 
|
|
|
|
|
Posted: 7/1/2014 5:25:32 AM EST
[Last Edit: Slash]
[#8]
The U-9 9mm UCIW buffers are in stock - www.HeavyBuffers.com/uciw
These buffers weigh 8.5 oz. and are longer than standard UCIW buffers in order to protect the bolt catch. Retail price is $150, this includes a special buffer spring. |
|
|
|
|
Posted: 7/1/2014 5:54:16 PM EST
[Last Edit: edcurtis]
[#9]
Quote HistoryOriginally Posted By Slash:
The U-9 buffers are in stock, but not on the website yet. These buffers weigh 8.5 oz. and are longer thanstandard UCIW buffers in order to protect the bolt catch. Retail price is $150, this includes a special bufferspring. What if I don't want the spring?  Can I reuse the one that comes with the LWRC kit?
How do I order, since not listed on website? |
|
|
|
|
Posted: 7/1/2014 6:10:12 PM EST
[Last Edit: Slash]
[#10]
|
|
|
|
FL, USA
|
Posted: 7/10/2014 8:46:03 AM EST
[#11]
Quote HistoryOriginally Posted By Slash:
I'm working on a buffer for the NEA PDW stocks that will work with a standard bolt carrier. This greatly interests me. Trying to get my 5.45 sbr as small as possible. I run Adam Arms piston systems almost exclusively and adding a piston strike face to the NEA carrier/buffer seems to be a recipe for sheared off bolts and a ruined carrier. |
|
|
|
Posted: 7/25/2014 11:40:08 PM EST
[Last Edit: Slash]
[#12]
Still waiting on BATFE approval to import my NEA PDW stock.
 |
|
|
|
|
Posted: 8/10/2014 2:33:03 PM EST
[#13]
^
|
|
|
|
|
Posted: 10/3/2014 12:31:45 AM EST
[#14]
^
|
|
|
|
|
Posted: 10/12/2014 12:47:38 AM EST
[#15]
Where can you even get a nea PDw stock in the states
|
|
|
|
|
Posted: 10/12/2014 2:01:06 PM EST
[#16]
Quote HistoryOriginally Posted By tommyidone: Where can you even get a nea PDw stock in the states Try http://www.engagearmament.com/ |
|
|
|
|
Posted: 12/4/2014 6:03:45 AM EST
[#17]
^
|
|
|
|
TX, USA
|
Posted: 1/3/2015 12:15:15 AM EST
[#18]
I just put the LWRC UCIW stock on my 300blk SBR. The buffer weighs 3.8 oz. Will this buffer cycle subs? I haven't shot it yet but it ran supers with a carbine buffer but not subs. It isn't suppressed yet but will be when approved. What weight buffer do I need if 3.8 oz. isn't heavy enough? It is an 8" barrel with pistol gas system.
|
|
|
|
Posted: 1/5/2015 9:18:42 AM EST
[Last Edit: Slash]
[#19]
Nothing is guaranteed with subsonic ammo, because there are no standards for that type of ammo.
My UCIW-XH buffer weighs 5.5 oz and works great in most .300 BO guns with or without a suppressor. |
|
|
|
SC, USA
|
Posted: 1/8/2015 4:06:13 PM EST
[#20]
Quote HistoryOriginally Posted By Slash: I'm working on a buffer for the NEA PDW stocks that will work with a standard bolt carrier. I'd love to see how that is going to work. There is not a lot of room in the buffer tube. I actually had to send my stock back to NEA because the bolt wouldn't fully retract. Seldom ejected a round and never locked on an empty mag. BK I have a .300blk build that would love a heavy buffer. |
|
|
|
Posted: 1/15/2015 4:26:50 PM EST
[#21]
Will the 9mm UCIW buffer work on a 5.7 upper?
|
|
|
|
|
Posted: 1/15/2015 4:44:58 PM EST
[#22]
Quote HistoryOriginally Posted By jaqufrost: Will the 9mm UCIW buffer work on a 5.7 upper? |
|
|
|
|
Posted: 1/15/2015 4:52:37 PM EST
[#23]
Have you had any trouble with stretched case mouths with the UCIW X-Heavy on the 5.7? I briefly tried an H2 on mine before I had the UCIW kit and it was opening too early and turning the cases into a straightwall case.
Can you comment on how much reciprocating mass these have? Are they a solid stainless steel design with no reciprocating mass? |
|
|
|
|
Posted: 1/15/2015 5:55:30 PM EST
[#24]
I haven't encountered that problem.
The UCIW-XH buffer has Tungsten weights inside that make up over half of the buffer's total mass.
|
|
|
|
NC, USA
|
Posted: 1/23/2015 9:37:54 PM EST
[Last Edit: WILSON]
[#25]
This ad-stomp earned me a three-day vacation.
|
|
|
|
Posted: 2/4/2015 4:45:07 AM EST
[#26]
...
|
|
|
|
FL, USA
|
Posted: 3/2/2015 7:37:15 PM EST
[#27]
How long is the uicw 9mm spring?
|
|
|
|
Posted: 3/2/2015 7:51:38 PM EST
[#28]
The relaxed length of a buffer spring is virtually irrelevant.
The U-9 buffer springs are custom made to my specs. They have 34 coils of wire. |
|
|
|
|
Posted: 4/5/2015 10:56:06 PM EST
[#29]
^
|
|
|
|
|
Posted: 6/29/2015 3:16:48 AM EST
[#30]
^
|
|
|
|
|
Posted: 7/29/2015 10:26:30 PM EST
[#31]
^
|
|
|
|
|
Posted: 10/1/2015 1:43:37 PM EST
[#32]
^^^
|
|
|
|
|
Posted: 1/4/2016 5:25:57 AM EST
[#33]
|
|
|
|
CO, USA
|
Posted: 1/8/2016 7:31:24 PM EST
[#34]
How is the 9mm buffer for NEA stock going?
|
|
|
|
Posted: 4/18/2016 2:35:26 AM EST
[#35]
^^^
|
|
|
|
|
Posted: 6/7/2016 12:20:00 PM EST
[#36]
^
|
|
|
|
|
Posted: 8/10/2016 3:09:21 PM EST
[#37]
^^^
|
|
|
|
VA, USA
|
Posted: 11/7/2016 2:18:10 AM EST
[#38]
Want to order one website won't allow purchase
|
|
|
|
Posted: 11/7/2016 2:28:29 AM EST
[#39]
Quote HistoryOriginally Posted By 2020tactical: Want to order one website won't allow purchase Please send me an email. I apologize for the inconvenience. |
|
|
|
|
Posted: 12/1/2016 2:46:55 AM EST
[#40]
|
|
|
|
|
Posted: 2/9/2017 5:30:38 AM EST
[#41]
|
|
|
|
|
Posted: 6/18/2017 10:38:28 PM EST
[#42]
^^^
|
|
|
|
|
Posted: 8/9/2017 9:09:29 AM EST
[#43]
EE RULE 1
|
|
|
|
Posted: 8/11/2017 11:23:10 AM EST
[#44]
off page 1
|
|
|
MO, USA
|
Posted: 11/22/2017 3:23:32 PM EST
[#45]
Any Black Friday sales planned?
|
|
|
|
Posted: 11/22/2017 4:29:44 PM EST
[#46]
No, I don't do any special 'sales'.
Sorry |
|
|
|
|
Posted: 1/24/2018 9:20:50 PM EST
[#47]
Slash, what buffer do I need for a 18" mid length tube 7.62x39 with an a1 stock? Thanks...Ken
|
|
|
|
|
Posted: 1/24/2018 10:01:46 PM EST
[Last Edit: Slash]
[#48]
Quote HistoryOriginally Posted By thetodd:
Slash, what buffer do I need for a 18" mid length tube 7.62x39 with an a1 stock? Thanks...Ken Since you're running a rifle length tube you'll also need a carbine-rifle spacer. www.heavybuffers.com/hss www.heavybuffers.com/springs |
|
|
|
|
Posted: 1/25/2018 6:49:42 PM EST
[#49]
Thank you for the tip...Ken
|
|
|
|
|
Posted: 10/16/2021 9:45:14 PM EST
[#50]
Originally Posted By Slash: http://www.heavybuffers.com/images/Products/UCIWBufferAssembly.png UCIW XH Buffer - $125 This Heavy Buffer weighs 5.5 oz, the extra mass helps reduce felt recoil and makes your gun operate more smoothly. Works great to mitigate the side effects of hot hand loads and suppressors. Machined from solid 303 Stainless Steel with a Stainless Steel roll pin for a lifetime of trouble-free performance. The head is polished for an extra smooth finish that won't cause damage to your buffer tube. Tungsten weights inside. Manufactured in the USA by Heavy Buffers, not affiliated in any way with LWRC. These buffers are designed specifically to complement the LWRC Ultra Compact Stock System. You MUST use the LWRC UCIW receiver extension. Attempting to use these buffers in an A2 (rifle) or standard carbine receiver extension will result in damage/injury/mayhem!!! Also available - 8.5 oz. buffer for Pistol Caliber Carbines - UCIW-9 XH Questions? Please contact me via email, NOT IM. [email=mailto:[email protected]]http://www.heavybuffers.com/images/Email%20Icon.gif[/email] Email sent. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2023 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
