Curtis Axiom stainless action, DLC bolt, 20moa rail. Hawk Hill 26" 6.5x47 1/8 twist barrel with 811 rounds on it, chambered by Joel Pendergraft. Threaded 5/8-24. Will come with a gen 2 3 chamber stainless little bastard brake.(not pictured). B&A tacsport Pro trigger. Shoots in the .1's. Action is super slick, you will be impressed. Previous owner estimated the action has 4-5k rounds on it.


MPA BA chassis in NRA blue with the rear and internal front weight kit(weights are new). The action was bedded to the chassis by Accurate Ordnance. Has 2 MDT 12rd mags.


Comes with 1 .308 barrel, HH blank and threaded 5/8-24. The 26" .308 1/10 twist has 513 rounds on it, chambered by Gradous. MPA action wrench.


Will come with 350-ish pieces of Lapua brass that have lots of firings on them and Redding comp dies. I have a pile of new Lapua brass also that can be sold also, keep in mind these are going to be very hard to get due to an announcement from Lapua. NOT selling these until rig sells!!!


This rig was used in PRS and has wear associated with that kind of use. The only issue I can see is some surface rust on the bolt handle, doesn't affect function and could be painted over. See the 4th picture.


It weighs 16.4lbs in the pictures. The rifle has hit the 8.8" mile target at Coleman's several times using Varget and 140gr hybrids.


*NOT included with sale; TB brake.


Break up prices, not breaking down any further, don't ask. Chassis w/mags, $850 shipped. Barreled action, .308 bbl, trigger, fired brass and dies, $1750 shipped to your FFL.


Complete rig minus items mentioned*, $2300 shipped to your FFL. May trade for a custom .223 or 6.5cm bolt gun, traditional stock like a Manners, no chassis. Should be a custom action or Tikka, NOT interested in any other factory actions. Maybe a partial trade towards the new 5" metal M&P Competitor, part #13199 or 13718.