22 and 30 cal Suppressor Alignment Gages to rule out baffle strikes. (Sold as a set)
18" lengths of O-1 tool steel paired, cut, ground to size, deburred, chamfered, sanded, polished, and oiled to be a nice set of gages for any competent smith or armorer. O-1 tool steel is softer than barrel steel and will not gouge your bore.
Compatible calibers: 22LR, 223rem, 5.56NATO, 223wylde, 224valkyrie, 30-06springfield, 308winchester, 300aac, 7.62x39, 7.62NATO, etc.
29 sets sold. 12 sets currently in production.3 complete sets available.
My process has changed quite a bit since I first started producing these, as of now it goes something like this:
Stage 1 | Pruned & Halved (material comes in 3' shear-brake cut lengths. The deformed ends get removed with a grinder, the final length is cut in half) - Grinder/Cutting Wheel
Stage 2 | Paired (to similar lengths)
Stage 3 | Matched (to exact length) - Grinder
Stage 4 | Chamfered - Rough - Grinder
Stage 5 | End Treatment (removing grinder scoring) - Mill File
Stage 6 | Chamfered (removing grinder scoring) - Fine - Mill File
Stage 7 | End Treatment (removing file scoring) - 120g SP
Stage 8 | End Treatment - 220g/600g/1000g/2000g/3000g SP
Stage 9 | Polish - 1000g/2000g/3000g SP
Stage 10 | Final Polish - Buffing Compound
A batch of 3 sets were completed today. On-hand and ready to ship.
Site PM only.