Anyone tried these yet in a bolt gun? If so, how do you like them and what was your load data?

was my favorite in my .308.

Hornady match brass fireformed neck sized 2.005"
FGMM 210m
175 rdf
42.7gr 8208xbr
2.860"

single digit es/sd's
2577 ft/sec 18.5" 1:10
.6 moa

running a .260 now

ETA: safe in my rifle. start low and work up

They shoot excellent from my srs and are very insensitive to jump for me.

43.6 Varget
Br-2
Winchester case

Mild but it's deadly consistent which is what I was after.

I love them.

I won’t publish my data, because it’s pretty extreme and was developed for my rifle.

I do use virgin Winchester brass, Fed large rifle match primers.

I thought I was close to dangerous. After my last match I found many guys loaded 1 Full gr more than me.

I was able to do 5 shot groups at under 1/2 MOA.

They were dialed out to 1200.

Wind still sucked and last match had a couple stages with 30mph full valve.

Loaded to AI mag length, didn’t seem to gain much changing jump.

WIN brass is fairly forgiving thanks to its greater capacity over most other brass. it's what I use for my 208gr 2000MR loads. was going to try the 225 eld-m seated 3"+ but sold the rifle to build my .260