User Panel
Originally Posted By gaspain: This (IRmount MK2) will be available next week. Opens up room for your nose, all the other mounts fasten from the top which makes the right camera stab your nose. Not with this one! Made of carbon fiber filled plastic secret sauce. I am very exited to bring this new media to the market. You are gonna love it. Similar to Glock plastic but stronger. Has thumb knobs for easy width adjusting too. And comes with carbon shoe. View Quote @gaspain With both Auroras on the same horizontal plane and with the correct IPD set, the setup touches my nose. No amount of bridge wizardry can change that. What am I missing? EDIT: Edited who I quoted in this post as I accidentally quoted mickdonaldson instead of gaspain. |
|
Deep State Timeline - https://docs.google.com/spreadsheets/d/1cialWWJ907vV3b9HPS2lhEspZh0WoPHqixUuKed_hFI/edit#gid=125747095
|
Is it adjustable for IPD?
Very nice work! John Originally Posted By gaspain: This (IRmount MK2) will be available next week. Opens up room for your nose, all the other mounts fasten from the top which makes the right camera stab your nose. Not with this one! Made of carbon fiber filled plastic secret sauce. I am very exited to bring this new media to the market. You are gonna love it. Similar to Glock plastic but stronger. Has thumb knobs for easy width adjusting too. And comes with carbon shoe. View Quote |
|
|
Originally Posted By PFran42: With both Auroras on the same horizontal plane and with the correct IPD set, the setup touches my nose. No amount of bridge wizardry can change that. What am I missing? View Quote A lot may have to do with your face/head, everybody's different...but I have a pretty big Schnoz . Maybe raise up, and angle a little down, to paralell the nose slope? I personally don't care if I lose the border status info on the top, so I raise it until that disappears - If I need it, I just pull the lid down to look. I also found I can move it forward and still retain 1 image with left and right edges, without burying it in my socket. I've also found you can go out on the IPD for one, losing a smidge of an inner edge, but the brain fills in, using the other edge - can't even tell. But again, this is all probably very personal to each user. Edit: I also have mine counter-weighted, so that balanced on 1 finger in the direct center of the helmet, everything sits perfectly level. I think it's 25 9mm 147's in with the Anker 15K Redux. |
|
|
Originally Posted By mickdonaldson: A lot may have to do with your face/head, everybody's different...but I have a pretty big Schnoz . Maybe raise up, and angle a little down, to paralell the nose slope? I personally don't care if I lose the border status info on the top, so I raise it until that disappears - If I need it, I just pull the lid down to look. I also found I can move it forward and still retain 1 image with left and right edges, without burying it in my socket. I've also found you can go out on the IPD for one, losing a smidge of an inner edge, but the brain fills in, using the other edge - can't even tell. But again, this is all probably very personal to each user. Edit: I also have mine counter-weighted, so that balanced on 1 finger in the direct center of the helmet, everything sits perfectly level. I think it's 25 9mm 147's in with the Anker 15K Redux. View Quote I'm not concerned with how they fit me. I was asking how a new bridge mount could possibly avoid nose-to-Aurora contact given the fact that... A) If two Aurora's are on the same horizontal plane ...and B) You had nose-to-Aurora contact with proper IPD set on your previous bino setup Forget about bridges for a minute... If the Aurora's are floating statically in space, adjusted properly for you... and you have nose-to-Aurora contact... A bridge isn't going to fix that. The only fix I see would be to remove material from the Aurora that is contacting your nose. I read Gaspain's comment as... He has a bridge that addresses nose-to-Aurora contact. |
|
Deep State Timeline - https://docs.google.com/spreadsheets/d/1cialWWJ907vV3b9HPS2lhEspZh0WoPHqixUuKed_hFI/edit#gid=125747095
|
Originally Posted By PFran42: I'm not concerned with how they fit me. I was asking how a new bridge mount could possibly avoid nose-to-Aurora contact... I read Gaspain's comment as... He has a bridge that addresses nose-to-Aurora contact. View Quote You quoted *me*, replying to slapomatt - about a height concern. I added "pushed forward" because On a RHINO II with MACHOS, I had to pull it back to almost the rear end of the Arm, whereas on the G24/SkeetIR, it sits in the middle'ish. The combo of both leads to ending up in different areas of adjustment between the two setups. I was telling slapomatt that he would probably have more adjustment to play with. I *wasn't* implying that the Aurora's magically gain eye relief. Then I just offered you some tips to try to alleviate your problem, as I have a giant honker, but no contact. I didn't even see gaspain's post, since it was the very last one on the page - I had no idea what any of that was about. Now I do, new Bridge, cool, options are good. |
|
|
Originally Posted By mickdonaldson: You quoted *me*, replying to slapomatt - about a height concern. I added "pushed forward" because On a RHINO II with MACHOS, I had to pull it back to almost the rear end of the Arm, whereas on the G24/SkeetIR, it sits in the middle'ish. The combo of both leads to ending up in different areas of adjustment between the two setups. I was telling slapomatt that he would probably have more adjustment to play with. I *wasn't* implying that the Aurora's magically gain eye relief. Then I just offered you some tips to try to alleviate your problem, as I have a giant honker, but no contact. I didn't even see gaspain's post, since it was the very last one on the page - I had no idea what any of that was about. Now I do, new Bridge, cool, options are good. View Quote Sorry about that. I'll edit that post. |
|
Deep State Timeline - https://docs.google.com/spreadsheets/d/1cialWWJ907vV3b9HPS2lhEspZh0WoPHqixUuKed_hFI/edit#gid=125747095
|
|
@PFran42
its mirrored design moves both switches to the center, which frees up space for the nose. No more battery corner digging into the nose. @Johnny_C yes, with a thumb wheel for each eye |
|
|
|
|
|
Originally Posted By gaspain: here is a blurry photo to convey the idea https://www.AR15.Com/media/mediaFiles/25567/mk2_Assembly_png-1437578.JPG View Quote Gotcha... Genius!!! |
|
Deep State Timeline - https://docs.google.com/spreadsheets/d/1cialWWJ907vV3b9HPS2lhEspZh0WoPHqixUuKed_hFI/edit#gid=125747095
|
MTEK FLUX bump helmet arrived.
I’m calling it... This is the best setup (bang for buck) for a complete duals setup. My work here is done. Attached File Attached File Attached File |
|
Deep State Timeline - https://docs.google.com/spreadsheets/d/1cialWWJ907vV3b9HPS2lhEspZh0WoPHqixUuKed_hFI/edit#gid=125747095
|
Originally Posted By PFran42: MTEK FLUX bump helmet arrived. I’m calling it... This is the best setup (bang for buck) for a complete duals setup. My work here is done. https://www.AR15.Com/media/mediaFiles/309598/89F90E1D-0265-45C1-A498-F1F7D6979678_jpe-1439649.JPG https://www.AR15.Com/media/mediaFiles/309598/49383E8C-ECFF-486E-A860-9518FD5F07A7_jpe-1439654.JPG https://www.AR15.Com/media/mediaFiles/309598/6C2E9385-17C8-4755-B39B-5F80C9B65477_jpe-1439656.JPG View Quote $1800 helmet...or a Chinese Army version? also it is maxed out on all 3 adjustments, so that's not for me with high eyes. Looks amazing. |
|
|
Originally Posted By gaspain: $1800 helmet...or a Chinese Army version? also it is maxed out on all 3 adjustments, so that's not for me with high eyes. Looks amazing. View Quote Officially licensed PTS version. Assembled in Hong Kong. I think it was $150 to my door. Perfect ultra lightweight solution for mounting NODs. The “secret sauce” with the FLUX (all versions) is the overall shape of the helmet. It cups the base of your skull. Pads are very nice memory foam and comfortable compared to most other bump helmets. Also, rear strap attachment points are ultra low allowing for very stable platform. Re: all adjustments being maxed out, that was just me slapping the pieces together for a photo shoot. There is a lot of range to work with for all adjustments. Here is a good review: https://www.thefirearmblog.com/blog/2020/01/17/friday-night-lights-pts-mtex-flux-bump-helmet/ Attached File |
|
Deep State Timeline - https://docs.google.com/spreadsheets/d/1cialWWJ907vV3b9HPS2lhEspZh0WoPHqixUuKed_hFI/edit#gid=125747095
|
Not super thrilled with my MACHOS - are these available? If so is there a link?
Thanks! Originally Posted By gaspain: @PFran42 its mirrored design moves both switches to the center, which frees up space for the nose. No more battery corner digging into the nose. @Johnny_C yes, with a thumb wheel for each eye View Quote |
|
|
Originally Posted By cledford3: Not super thrilled with my MACHOS - are these available? If so is there a link? Thanks! View Quote @cledford3 Anything coming from @gaspain will eventually wind up in his Esty (his Etsy name is kiloohm) storefront: https://www.etsy.com/shop/kiloohm?ref=simple-shop-header-name&listing_id=784285118 Attached File |
|
Deep State Timeline - https://docs.google.com/spreadsheets/d/1cialWWJ907vV3b9HPS2lhEspZh0WoPHqixUuKed_hFI/edit#gid=125747095
|
thanks, yea by the end of the week I will have them listed. Slight delay waiting for parts. They are pretty cool, worth the wait.
|
|
|
ta da!
will be live by the end of day, shipping mid next week. made of carbon fiber polycarbonate blend. Includes shoe. Pricing? i dunno yet Attached File Attached File Attached File |
|
|
Originally Posted By gaspain: ta da! will be live by the end of day, shipping mid next week. made of carbon fiber polycarbonate blend. Includes shoe. Pricing? i dunno yet https://www.AR15.Com/media/mediaFiles/25567/P1070090_JPG-1447842.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070093_JPG-1447843.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070096_JPG-1447845.JPG View Quote Does that put them closer together? |
|
Tactipug. The ultimate compact firepower!
|
|
Very nice work.
A more elegant design for a more civilized age. Originally Posted By gaspain: ta da! will be live by the end of day, shipping mid next week. made of carbon fiber polycarbonate blend. Includes shoe. Pricing? i dunno yet https://www.AR15.Com/media/mediaFiles/25567/P1070090_JPG-1447842.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070093_JPG-1447843.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070096_JPG-1447845.JPG View Quote |
|
|
Originally Posted By gaspain: ta da! will be live by the end of day, shipping mid next week. made of carbon fiber polycarbonate blend. Includes shoe. Pricing? i dunno yet https://www.AR15.Com/media/mediaFiles/25567/P1070090_JPG-1447842.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070093_JPG-1447843.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070096_JPG-1447845.JPG View Quote That is VERY NICE. Good job!!! |
|
Deep State Timeline - https://docs.google.com/spreadsheets/d/1cialWWJ907vV3b9HPS2lhEspZh0WoPHqixUuKed_hFI/edit#gid=125747095
|
That is a real sex machine
|
|
Gun control is like trying to eliminate drunk driving by making it illegal for sober people to own cars
|
Originally Posted By gaspain: ta da! will be live by the end of day, shipping mid next week. made of carbon fiber polycarbonate blend. Includes shoe. Pricing? i dunno yet https://www.AR15.Com/media/mediaFiles/25567/P1070090_JPG-1447842.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070093_JPG-1447843.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070096_JPG-1447845.JPG View Quote I started to design the same thing in Solidworks to print a few months ago and got sidetracked. It looks almost exactly like what I had in mind, right down to the insert bushings. Well done! |
|
'This Guy Is Such a Total Pussy --- It's Stunning' - Lt. Col. Ralph Peters
|
Originally Posted By gaspain: ta da! will be live by the end of day, shipping mid next week. made of carbon fiber polycarbonate blend. Includes shoe. Pricing? i dunno yet https://www.AR15.Com/media/mediaFiles/25567/P1070090_JPG-1447842.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070093_JPG-1447843.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070096_JPG-1447845.JPG View Quote @gaspain I’m scooping one up as soon as it lists. I placed an order for other parts from you today as well. Can’t wait! |
|
|
It's live. I settled on $139 because these take more time and finish work than the other one. I only have a a small quantity now, these do have a lead time of mid next week because of the additional hardware that I am waiting to receive. As a reminder, there is a Arfcom team member 10% discount on all items. (<--if you clicked that link for the discount code, you are not a team member)
|
|
|
Are the products themselves 3d printed or is that just for R&D?
|
|
|
|
Originally Posted By gaspain: 3d printed carbon fiber polycarbonate View Quote View All Quotes View All Quotes Originally Posted By gaspain: Originally Posted By ThePitt: Are the products themselves 3d printed or is that just for R&D? 3d printed carbon fiber polycarbonate Looks good. Don't know much about 3d printing. I bought a grip for my CZ Scorpion and didnt know it was 3d printed and wasn't too fond of it. Especially when they started injection moulding the same grip and mine felt like an inferior product. Just watched a quick video on carbon fiber polycarbonate and that stuff seems way more legit. |
|
|
Originally Posted By ThePitt: Looks good. Don't know much about 3d printing. I bought a grip for my CZ Scorpion and didnt know it was 3d printed and wasn't too fond of it. Especially when they started injection moulding the same grip and mine felt like an inferior product. Just watched a quick video on carbon fiber polycarbonate and that stuff seems way more legit. View Quote It's is an advanced engineering media. Not your normal stuff. It is strong and rigid and won't bend in a hot car. This mount is much better than my last one as far as strength. |
|
|
Why the PTS and Airsoft Bump Helmets instead of a real product liek a Crye Nitecap?
Most people have nothing but good things to say about the Nitecaps and they're only like $70. |
|
If you want, I can show you how to make a bomb out of a roll of toilet paper and a stick of dynamite...
|
|
Do you have the absolute minimum PD supported?
Thanks! |
|
|
|
Originally Posted By gaspain: ta da! will be live by the end of day, shipping mid next week. made of carbon fiber polycarbonate blend. Includes shoe. Pricing? i dunno yet https://www.AR15.Com/media/mediaFiles/25567/P1070090_JPG-1447842.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070093_JPG-1447843.JPG https://www.AR15.Com/media/mediaFiles/25567/P1070096_JPG-1447845.JPG View Quote ordering now |
|
|
I was messing around and on accident I had one camera in black/white mode and the other camera in color mode. Was really neat, had a crisper appearance and kinda surprised me. Try it out
|
|
|
Gun control is like trying to eliminate drunk driving by making it illegal for sober people to own cars
|
|
Originally Posted By gaspain: color but with more dynamic range View Quote View All Quotes View All Quotes Originally Posted By gaspain: Originally Posted By JoeMal: Did you see color, b/w, or a little of both? color but with more dynamic range will have to play with that once I get your new mount and get it rigged up... |
|
|
non dom
|
|
|
if there was a red and blue mode we could watch 3d movies at night.
|
|
callmenoshie: "saying that females have the potential to be "bat shit crazy" is like saying the sky has the potential to be blue."
XCRmonger: "I've seen German Shit Porn that was sexier." |
Gents, we've had several Sionyx users purchase our new TNVC/Stenier IR laser with very good results. Some pics HEREof a recent user showing down range signature. If you any questions, please feel free to IM me or got to that thread and ask away. Thank you.
|
|
Tactical Night Vision Corporation - TNVC, INC.
http://www.tnvc.com [email protected] (909) 796-7000 Dedicated to the men and women in uniform who fight the good fight. |
Originally Posted By TNVC: Gents, we've had several Sionyx users purchase our new TNVC/Stenier IR laser with very good results. Some pics HEREof a recent user showing down range signature. If you any questions, please feel free to IM me or got to that thread and ask away. Thank you. View Quote Damnit. More $$$$ |
|
|
|
That mount is just awesome! Here goes more money on my SICKNESS! LOL.
By the way, on another note... TVNC is the nicest company. I have ever worked with. Thanks again guys for the help yesterday over the phone with my Magnet question on the PVS 15, and 18 mount. Outstanding Service, all the way around! |
|
|
Guys, I have a Sionyx camera, and have NO idea what all the brands, acronyms, amd other terms are.
i am so gunshy on buying stuff to set up a helmet mount because I know NOTHING about it. i have a big jug head, like a size 8 fitted ball cap. can y'all give me some recommendations for a budget bump cap and a mount for a single camera? thanks in advance. |
|
Oh, you think Honkness is your ally. But you merely adopted the honk; I was born in it, molded by it. I didn't see the light until I was already a man, by then it was nothing to me but BLINDING! The honkings betray you, because they belong to me!
|
Originally Posted By ClatuVertanictu: Guys, I have a Sionyx camera, and have NO idea what all the brands, acronyms, amd other terms are. i am so gunshy on buying stuff to set up a helmet mount because I know NOTHING about it. i have a big jug head, like a size 8 fitted ball cap. can y'all give me some recommendations for a budget bump cap and a mount for a single camera? thanks in advance. View Quote @ClatuVertanictu where in TX are you? There are a few guys around that would likely let you see their setup in person. |
|
Tactipug. The ultimate compact firepower!
|
Originally Posted By ClatuVertanictu: Guys, I have a Sionyx camera, and have NO idea what all the brands, acronyms, amd other terms are. i am so gunshy on buying stuff to set up a helmet mount because I know NOTHING about it. i have a big jug head, like a size 8 fitted ball cap. can y'all give me some recommendations for a budget bump cap and a mount for a single camera? thanks in advance. View Quote I have a big head and use an airsoft helmet in L/XL sizing. I wish it was bigger. Unsure if a name brand helmet would be bigger. Let me know if you're in Dallas |
|
Gun control is like trying to eliminate drunk driving by making it illegal for sober people to own cars
|
How do these compare in night vision image quality to ATN 4K products?
|
|
|
Originally Posted By mah827: @ClatuVertanictu where in TX are you? There are a few guys around that would likely let you see their setup in person. View Quote View All Quotes View All Quotes Originally Posted By mah827: Originally Posted By ClatuVertanictu: Guys, I have a Sionyx camera, and have NO idea what all the brands, acronyms, amd other terms are. i am so gunshy on buying stuff to set up a helmet mount because I know NOTHING about it. i have a big jug head, like a size 8 fitted ball cap. can y'all give me some recommendations for a budget bump cap and a mount for a single camera? thanks in advance. @ClatuVertanictu where in TX are you? There are a few guys around that would likely let you see their setup in person. |
|
Oh, you think Honkness is your ally. But you merely adopted the honk; I was born in it, molded by it. I didn't see the light until I was already a man, by then it was nothing to me but BLINDING! The honkings betray you, because they belong to me!
|
Can someone describe how towel et Mount this like I’m stupid? I have all the pieces including Wilcox shoe interface, norotos interface adapter etc. I can’t figure out how t o remove the sliding piece on the helmet mount as it has one small set screw on each end. Also, I don’t see how the kiloohm thing mounts to the Aurora.
Disregard part two; duh.....I’ve figured that out. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.