Quote History Quoted:
Im talking about the custom receiver. Wondering where to buy one.
What part of the ps90 is registered? Its that top reciever part right?
How hard is it to get that barrel detached?
If i sand down the ruff parts or cerakote it will the gun lose value? (I can cerakote it my self)
If it gets SBRed does it actually need to be engraved? I have read a lot of conflicting info on that. If it does where is the least visable place to do that? Does it even have to be visable? Or can it be on the underside of the reciever some where?
Thanks for all the help!
View Quote
Google PS90 receivers. There are a few places out there that will customize them.
The metal part, which is the receiver is the registered part. Not the plastic part.
Not hard at all to get the barrel detached. Google PS90 barrel change. Lots of info and pics out there on this.
If you have a good finish on yours I would not touch it. If not, then a good cerakote job will not cause it to loose vaule
Making the PS90 into a SBR will require you to engrave it. It does have to be visible without disassembly. My info is just below the caliber. No one ever notices it till I point it out as the ATF standard is very small, and I had mine blacked out to match finish.