Problem I have with Tactical handles, is you pick up their movement during cycle in your peripheral vision.
So as said, pretty easy to machine one, and have made many over the years, but end up pulling them back off and going to back to the standard handle since its that peripheral vision movement of them that pulls your sight off target isntead.
Hell, the worse of the worse, is this style, since is so large and high, will cause you to brink as it comes ripping back at cycle pretty much every shot isntead.
The style you looking at will be not as bad since it only extended out farther, but in silver during the day light that your going to pick up the flash of it cycling back, is going to be a peripheral vision distraction problem as well.
So if we take this unit, the farther out the end of handle protrudes, the lower it needs to be on the side of the receiver.
So instead of the part that goes in the bolt be centered on the handle, that part needs to be higher on the handle, so this pulls the handle farther downward on the receiver to keep it out of your peripheral vision to start with. But even with this, you still pick up, end up shorting the handle to the point that your not picking it up in your peripheral vision. So in the end, the handle so short that it's really not longer beneficial over the stock handle, and you just run with the blued stock handle isntead.
Food for thought over the differences of products for just show, and the ones that will improved the shotgun for go isntead.