User Panel
User Panel
User Panel
|
Posted: 1/22/2022 6:28:58 PM EDT
my 7.62x39 ar has somewhere around 1500 rounds, give or take. My 5.56 is only around 500 or so, but it's pretty new.
|
|
|
|
Posted: 1/22/2022 6:36:43 PM EDT
I have around 5K on my 14 year old 6921. All original parts still.
|
|
|
|
Posted: 1/22/2022 6:43:21 PM EDT
Noveske SBR with something around 12k through it. Replaced the original barrel last summer but it's not shot-out. Same goes for the bolt.
|
|
|
|
Posted: 1/22/2022 7:18:00 PM EDT
I have really close to 15k through my DD AR in 300 BLK. I know it's over 13k for sure.
Got it in 2012. I've replaced parts regularly on it so I haven't really worn any parts out yet. 
|
|
|
|
Posted: 1/22/2022 8:07:36 PM EDT
About 3500-4k rounds, the 16in on top. This was the first one I ever built back when AA piston systems were first introduced and YHM sold CL barrels (2009 I believe). Still holds 3/4 moa average @ 100yds with my handloads. Changed a few things over the years, but never had a repair needed. Since the original build I have changed the handguard, optics, muzzle device to hold the suppressor and stock because I like the locking feature. When I first built it, it was hard to find a handguard that worked with the AA kit and I jumped on this one as soon as Samson put it out.
 Attached File |
|
|
|
Posted: 1/22/2022 8:35:41 PM EDT
Most barely have a couple hundred but when I really like something orvwant to get good with it I can't keep count.
556 is crazy expensive right now so I have to start shooting steel case stuff in x39, 9, and 223 in a few designated set ups that might get up there. |
|
|
|
Posted: 1/22/2022 8:43:43 PM EDT
|
|
|
|
Posted: 1/22/2022 10:17:43 PM EDT
My first AR has well over 15K. I have replaced gas rings multiple times, replaced the firing pin retaining pin once, the trigger started doubling so I replaced it with a MBT trigger, the barrel’s accuracy has noticeably degraded in accuracy as I think it has worn probably close to being shot out, I have changed parts on it over the years but the main guts are the same.
|
|
|
|
Posted: 1/22/2022 10:25:05 PM EDT
My mod 1 is on its second or third barrel. Also wore out two bolt catches so far in it
 Attached File |
|
|
|
Posted: 1/22/2022 10:28:56 PM EDT
Have an old Colt H BAR from the 90's that has at least 15k on it. Still shoots well , but the accuracy is starting to go.
|
|
|
|
Posted: 1/22/2022 10:30:04 PM EDT
The only guns I can tell you my round counts on are brand new ones.
Never seen the purpose of the anal-retentive process of counting rounds. Proper inspection during cleaning and observing while shooting will tell you if you need maintenance. |
|
|
|
Posted: 1/22/2022 10:35:33 PM EDT
Have at least 10k through my 2009 DDM4V1, maybe more. I have changed the extractor spring and the recoil spring but other than that it is stock. Great gun.
|
|
|
|
Posted: 1/22/2022 10:51:36 PM EDT
I think 4000-5000 on a single
|
|
|
|
Posted: 1/23/2022 12:15:36 AM EDT
I have a shade over 20K through my usin’ AR. It’s on it’s second 16” carbine gas barrel.
|
|
|
|
Posted: 1/23/2022 1:06:00 AM EDT
Somewhere around 9000 rounds on a Colt 6920
|
|
|
|
Posted: 1/23/2022 2:29:22 AM EDT
Quote History Quoted: Have at least 10k through my 2009 DDM4V1, maybe more. I have changed the extractor spring and the recoil spring but other than that it is stock. Great gun. My highest use AR is also a 2009 vintage DDM4 and strangely enough also around 10k though it has a BA barrel and G trigger now. Original receivers and bolt group though. The original 16” DD barrel wasn’t much of a shooter on my specimen. BA Hanson stainless barrel has around 1500 on it and it is a shooter and perfectly gassed. I’m going to run the DD bolt till it breaks. |
|
|
|
Posted: 1/23/2022 4:18:10 AM EDT
My 11.5 needs to re-barreled. I'm at around 22k and it's not grouping anymore.
|
|
|
|
Posted: 1/23/2022 4:19:31 AM EDT
Guesstimated amount for my beater/go-to AR is something like 6-7k rounds.
I used to keep track based off how much ammo I had. Hard to do when I bring out multiple guns to shoot and when teaching classes. |
|
|
|
Posted: 1/23/2022 4:33:05 AM EDT
Colt 6921 barrel cut and shaved to a LW 12.5 - 7000 ? Might be more, but still grouping well
DD MK18 upper, about the same as above at least, no issues, had to put a cam pin in the BCG Rainier Arms Combat 14.5 CHF C/L - Full rifle, these had great barrels, and even the BCG is a Denny's Thunderbolt - Conservatively I have 6-7K through it. My son swears it's much more. With great ammo, it is still very accurate. |
|
|
|
Posted: 1/23/2022 4:52:38 AM EDT
My AR’s are all sadly low round count guns, mostly because they are all kinda on the new side. Now my AK, has maybe 6K? I’ve owned that since early 2001.
|
|
|
|
Posted: 1/23/2022 11:55:23 AM EDT
My le6920 has between 1500 and 2k
My home build 16in beater has about 1500-2k also Between my other ar15s past and present i probably have another 2k spread between those. |
|
|
|
Posted: 1/23/2022 10:52:19 PM EDT
No idea, maybe 3-4k from a DD MK18.
Around 1200 on a Centurion and KAC 11.5 uppers. The others are probably around 500-1000. I do a lot of flipping, so a lot of rounds on other uppers. |
|
|
|
Posted: 1/24/2022 7:31:02 AM EDT
Old 20inch that was the first AR I got in the mid 90's. I have around 4k through it and still have it.
|
|
|
|
Posted: 1/24/2022 10:52:50 AM EDT
My highest round count AR is also my shittiest quality AR. M&A Parts 16" M4 carbine kit with A2 upper. Upgraded to a RRA 2-stage trigger somewhere around 2004 and proceeded to bump fire probably half of the 6,000rds through it. Lost the second stage on the RRA trigger pretty quickly so it basically has a 2lb trigger with no defined wall
The unlined, 4140 1/9 twist barrel still shoots about 3-4moa with m193. Only failures were the rifle extension and M4 cut upper made it about a year before turning into a single shot. 10min with a dremel and my rifle extension was now an M4 extension. I also had to mortar rounds out of it after shooting brass after hundreds of rounds of steel case. My other high quality build had a Sabre defense barrel that shoots amazing. It's had an ACOG on it since 2009 and has been my go to up until lat year. All my other high quality builds/purchases have been in the last 2-3yrs and aren't over 1,000rds or so. |
|
|
|
Posted: 1/24/2022 4:08:34 PM EDT
I have a tendency to change uppers around 4-6,000rds, and keep very detailed range records so I know exactly how many rounds are fired through a particular upper.
In 2021 I decided that I was going to shoot my Colt 6920 until it no longer groups well. It started life as an extremely accurate unit so I'll know when it starts to slip. This rifle has only been fed, and will only be fed, Wolf Classic steel case. I'm hoping I get 10k through it before I need to replace the upper (yes I know I can replace the barrel and bolt, but complete uppers are just easier for me). One of the things I like about LMT is they serialize their MRP uppers. This helps with my OCD record keeping. Non-serialized uppers are recorded by the serial on the optic or if no optic then a paint pencil number is written on it. Shot another 420 rounds this morning through my Colt and LMT. When ammo prices return to sane I'll be able to get back into a higher round count routine. |
|
|
|
Posted: 1/24/2022 6:00:42 PM EDT
About 9,200 rds give or take.
Anderson barrel and RRA bolt.  " /> " />
|
|
|
|
Posted: 1/24/2022 8:16:08 PM EDT
Quote History Quoted: About 9,200 rds give or take. Anderson barrel and RRA bolt. http://i.imgur.com/yfXu1Ig.jpg" target="_blank">http://i.imgur.com/yfXu1Ig.jpg http://i.imgur.com/CuQTQLN.jpg" target="_blank">http://i.imgur.com/CuQTQLN.jpg Holy keyholes. |
|
|
|
Posted: 1/24/2022 9:13:32 PM EDT
Quote History Quoted: Holy SHIT!! keyholes. That's crazy. |
|
|
|
Posted: 1/24/2022 9:31:58 PM EDT
I have an Olympic SGW/Fleming transferable M16 lower with over 65,000 rounds on it. That was all done in about 3 years after I purchased it.
|
|
|
|
Posted: 1/25/2022 12:57:01 AM EDT
Quote History Quoted: My highest round count AR is also my shittiest quality AR. M&A Parts 16" M4 carbine kit with A2 upper. Upgraded to a RRA 2-stage trigger somewhere around 2004 and proceeded to bump fire probably half of the 6,000rds through it. Lost the second stage on the RRA trigger pretty quickly so it basically has a 2lb trigger with no defined wall The unlined, 4140 1/9 twist barrel still shoots about 3-4moa with m193. Only failures were the rifle extension and M4 cut upper made it about a year before turning into a single shot. 10min with a dremel and my rifle extension was now an M4 extension. I also had to mortar rounds out of it after shooting brass after hundreds of rounds of steel case. My other high quality build had a Sabre defense barrel that shoots amazing. It's had an ACOG on it since 2009 and has been my go to up until lat year. All my other high quality builds/purchases have been in the last 2-3yrs and aren't over 1,000rds or so. I think I speak for all of us when I say we need pics of that beautiful beater........guns exactly like that are my favorites! 
|
|
|
|
Posted: 1/25/2022 4:15:35 AM EDT
My noveske started as a 10.5, got shot out, rebuilt it, and it’s now wearing geissele bits with a 12.5 noveske barrel.
I put about 11.5-13.5k through it over the course of 6 years. |
|
|
|
Posted: 1/25/2022 11:41:02 AM EDT
My Duty AR has slightly over 8,000 rounds through it, a little over 3,000 rounds of Hornsby 40 gr Urban TAP and the rest crappy practice ammo.
|
|
|
|
Posted: 1/25/2022 11:17:43 PM EDT
Quote History Quoted: I think I speak for all of us when I say we need pics of that beautiful beater........guns exactly like that are my favorites! Purple Olympic Arms lower with slightly tight magwell and selector pint full from when I was 17 or 18 I'm turning 36 in a couple months.  Edit: that was one of the first few mags I purchased for it out of the surplus mag bins at gun shows back in the day. $25+ for old crusty shit. Thankfully I had found Arfcom and knew to buy Okay mags when I found them. |
|
|
|
Posted: 1/25/2022 11:36:02 PM EDT
Like 300 rounds. I sold a bunch of my older ARs recently abd bought a few new ones. So I'm back to low round count. Just the way it worked out.
|
|
|
|
Posted: 1/26/2022 3:39:56 PM EDT
Quote History Quoted: There's not a whole lot to see, lol Purple Olympic Arms lower with slightly tight magwell and selector pint full from when I was 17 or 18 I'm turning 36 in a couple months. https://i.ibb.co/sbCCd2T/4-EF0-A608-903-C-431-D-8-E92-A319074-BC6-EA.jpg Edit: that was one of the first few mags I purchased for it out of the surplus mag bins at gun shows back in the day. $25+ for old crusty shit. Thankfully I had found Arfcom and knew to buy Okay mags when I found them. THANKS!!!!!!!!! |
|
|
|
Posted: 1/26/2022 4:04:31 PM EDT
I actually sold my high mileage, but budget, ARs during the last panic. Made a profit, upgraded. So none of mine is high round count at the moment
|
|
|
|
Posted: 1/26/2022 6:53:36 PM EDT
2002 era Rock River Arms with about 8000 rounds.
And seldom mis fires. Usually when I use some shitty GI mag that is probably older than I am. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2022 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File