User Panel
User Panel
User Panel
|
Posted: 4/22/2018 11:05:39 PM EDT
[#1]
Quote HistoryOriginally Posted By krdt:
Not 100% sure, but there have been various reasons given for it by ADCO when the subject came up. Variables in factory barrel length I believe were mentioned, and whether you measured from the muzzle back or from the chamber/bolt face forward. I can't honestly say if that's a viable reason, or if it's just more a matter of them having a lot of work and not always being super detail oriented. The responses from ADCO have often given me the impression it's more of the latter than the former, saying things like, "Only someone taking Instagram pictures is going to care whether it's 10.3 or 10.5." I'm paraphrasing from memory, but those sorts of comments don't give the overall impression of a shop deeply concerned with details. Yeah, definitely. Part of the reason I prefer factory DD 10.3 barrels even if a chopped Colt would be more accurate. I've seen quite a number of chopped barrels where the shoulder didn't match the RIS II; clearly they were more like 10.4 or 10.5, and that would really bother me. While it's certainly not something I would want in any case, I could live with it a bit more on a Mod 0/CQBR Block I. On a Block 2 it just stands out like a sore thumb when the shoulder isn't even with the rail. ETA: I guess you could say the same about an incorrect barrel length sticking out on a Mod 0 because of the bayonet lug, but until I replace the 10.5 on my Mod 0 I like to pretend it's really not that bad, lol. As far as I know those specs are completely accurate. @Pezboytate would have to chime in with exactly the source, but they should be correct. Quote HistoryOriginally Posted By krdt:
Originally Posted By M4A1SOPMOD: I dont know why ADCO cant just cut it to 10.3 without it having to be markes, i know they get a lot of requests for that length. Originally Posted By BurtSaun1049:
I feel like that's my greatest fear with sending in my barrel to be cut. I know Adco has said to be very precise with what you want and to mark where you want cut, because otherwise, they'll get it close, within the tolerances that you specified. But to me, and likely most people here, the difference between 10.3 and 10.5 is pass/fail. Has this schematic been vetted for accuracy? If so, will be really helpful. ETA: I guess you could say the same about an incorrect barrel length sticking out on a Mod 0 because of the bayonet lug, but until I replace the 10.5 on my Mod 0 I like to pretend it's really not that bad, lol. As far as I know those specs are completely accurate. @Pezboytate would have to chime in with exactly the source, but they should be correct. If you cut a barrel to exactly 10.3" with a .63" thread length, it will be too short. Crane cut down barrels are about 10.35" with a .60" thread length. Colt 10.3" barrels are about 10.38" with a .63" thread length. The problem is that ADCO and others don't know this and they probably don't care. |
|
|
|
IN, USA
|
Posted: 4/22/2018 11:28:47 PM EDT
[Last Edit: Dyzastr]
[#2]
Quote HistoryOriginally Posted By Tigwelder1971:
Hows the chop job? Shark Arms? @milspec556 besides avoiding having to cut down a precious rail ladder, I have the sight that way for ease of access. As I was installing it, I noticed how the design almost begs to be placed like that. It has wigs to protect the sight ears, which is useful more so when placed like that, and the under side has a recess cutout to aid in flipping the sight, which is basically lost when it's placed like a std sight. I'm not sure if there is a right way, but that works for me. I honestly thought I'd get more flack for a qd in place of Cqd or the m900  . Honestly, I'm just glad to have a rail that the 99051 can feel home on. Even if it's makin room for a rail ladder .
eta- if I had to guess based on shoulder of muzzle to bayo lug distance mine is close to a 10.4(mod0). The bottom barrel is the colt cutdown by adco (through previous owner). Note: the tan ring of paint is on the fh, not the barrel. Adds the illusion of being even longer than it really is. Need to strip it but not really bothered by it enough to do so. 
|
|
|
|
Posted: 4/23/2018 1:21:00 AM EDT
[#3]
All my replacement barrels that we have received from Crane for rebuilds have been Crane cut down Colt Govt profile 14.5" barrels. Haven't received any in a year however and the last few were new FN SOCOM profile 10.3". On leave right now so won't be able to measure for a few weeks.
CD  Attached FileCD |
|
|
|
IN, USA
|
Posted: 4/23/2018 2:24:55 AM EDT
[#4]
The progression of my cqbr obsession.
|
|
|
|
Posted: 4/23/2018 6:21:02 AM EDT
[#5]
Quote HistoryOriginally Posted By Combat_Diver:
All my replacement barrels that we have received from Crane for rebuilds have been Crane cut down Colt Govt profile 14.5" barrels. Haven't received any in a year however and the last few were new FN SOCOM profile 10.3". On leave right now so won't be able to measure for a few weeks. CDhttps://www.AR15.Com/media/mediaFiles/32677/IMG_4690-523251.JPG CD
|
|
|
|
FL, USA
|
Posted: 4/23/2018 11:05:16 AM EDT
[#6]
I'm about to finish the Mod 0 and planned on the classic look with LMT rear sight Comp M2 with a Wilson mount. However, I have trouble with Aimpoints. The dot looks like a blob. I was thinking of a TA01NSN for the Mod 0 with a Matech rear sight. Thoughts or alternatives? Thanks
|
|
|
|
Posted: 4/23/2018 11:17:12 AM EDT
[#7]
Quote HistoryOriginally Posted By Tigwelder1971:
That's interesting as hell. FN SOCOM 10.3s. Quote HistoryOriginally Posted By Tigwelder1971:
Originally Posted By Combat_Diver:
All my replacement barrels that we have received from Crane for rebuilds have been Crane cut down Colt Govt profile 14.5" barrels. Haven't received any in a year however and the last few were new FN SOCOM profile 10.3". On leave right now so won't be able to measure for a few weeks. CDhttps://www.AR15.Com/media/mediaFiles/32677/IMG_4690-523251.JPG CD 
|
|
|
|
|
Posted: 4/23/2018 11:42:18 AM EDT
[#8]
Quote HistoryOriginally Posted By MILSPEC556:
Factory too. Not chopped by CRANE either. See this is why you should be following all the clone threads Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By Tigwelder1971:
Originally Posted By Combat_Diver:
All my replacement barrels that we have received from Crane for rebuilds have been Crane cut down Colt Govt profile 14.5" barrels. Haven't received any in a year however and the last few were new FN SOCOM profile 10.3". On leave right now so won't be able to measure for a few weeks. CDhttps://www.AR15.Com/media/mediaFiles/32677/IMG_4690-523251.JPG CD Personally, I like the heavier profile bbls. 14.5 and 11.5". @Combat_Diver More info once back from leave? Stay safe. |
|
|
|
|
Posted: 4/23/2018 11:46:07 AM EDT
[Last Edit: MILSPEC556]
[#9]
Quote HistoryOriginally Posted By Tigwelder1971:
Yeah, I had no idea. Personally, I like the heavier profile bbls. 14.5 and 11.5". @Combat_Diver More info once back from leave? Stay safe. Quote HistoryOriginally Posted By Tigwelder1971:
Originally Posted By MILSPEC556:
Originally Posted By Tigwelder1971:
Originally Posted By Combat_Diver:
All my replacement barrels that we have received from Crane for rebuilds have been Crane cut down Colt Govt profile 14.5" barrels. Haven't received any in a year however and the last few were new FN SOCOM profile 10.3". On leave right now so won't be able to measure for a few weeks. CDhttps://www.AR15.Com/media/mediaFiles/32677/IMG_4690-523251.JPG CD Personally, I like the heavier profile bbls. 14.5 and 11.5". @Combat_Diver More info once back from leave? Stay safe. |
|
|
|
|
Posted: 4/23/2018 12:00:03 PM EDT
[#10]
Quote HistoryOriginally Posted By MILSPEC556:
Same here. But yeah it has always been Colt 10.3 govt, throughout the Mk18 Mod 0, Block 1 CQBR, Block 1.5, and most of the life of the Block 2/Mod 1. The FN 10.3 SOCOM is something he found this year. Pretty awesome. Hell, I didn't know FN made a SOCOM profile until about 45 days ago. 16" and seems about half do not have the 203 flats. 
|
|
|
|
|
Posted: 4/23/2018 12:23:15 PM EDT
[#11]
Quote HistoryOriginally Posted By Tigwelder1971:
Yeah, definitely new, at least to me. Hell, I didn't know FN made a SOCOM profile until about 45 days ago. 16" and seems about half do not have the 203 flats. Quote HistoryOriginally Posted By Tigwelder1971:
Originally Posted By MILSPEC556:
Same here. But yeah it has always been Colt 10.3 govt, throughout the Mk18 Mod 0, Block 1 CQBR, Block 1.5, and most of the life of the Block 2/Mod 1. The FN 10.3 SOCOM is something he found this year. Pretty awesome. Hell, I didn't know FN made a SOCOM profile until about 45 days ago. 16" and seems about half do not have the 203 flats. |
|
|
|
|
Posted: 4/23/2018 12:29:16 PM EDT
[#12]
Quote HistoryOriginally Posted By MILSPEC556:
>we are stuck with their commercial stuff. Which is a major bum deal. 
Maybe contract overruns down the road???
|
|
|
|
|
Posted: 4/23/2018 12:49:07 PM EDT
[#13]
|
|
|
|
OK, USA
|
Posted: 4/23/2018 3:14:31 PM EDT
[Last Edit: Liquid77]
[#14]
Well here is what I got so far. I know the lower is WRONG I am waiting on my stamp for my 6920 Lower. PRI CH and EXPS is on its way aswell.
|
|
|
|
Posted: 4/23/2018 5:46:28 PM EDT
[#15]
|
|
|
|
|
Posted: 4/23/2018 7:41:13 PM EDT
[#16]
The MK18. Finally took the plunge. Hopefully the 4-Prong and Colt building block will stone for my pistol brace sins.
Haven’t had a chance to shoot it yet, but I’m in love with this build.  Attached File |
|
|
|
|
Posted: 4/23/2018 8:27:50 PM EDT
[#17]
Quote HistoryOriginally Posted By MILSPEC556:
So who supplied said barrels before Colt then? ETA I see your edit- had a feeling you were referring to LMT 10.5s, which Karl made and makes factory so there would be nothing for CRANE to cut down |
|
|
|
|
Posted: 4/23/2018 8:41:27 PM EDT
[#18]
Quote HistoryOriginally Posted By krdt: While perhaps some 10.5" barrels (supplied by LMT) were used in early testing, I don't think anyone has ever been able to produce a photo to corroborate 10.5s being issued, or in actual field use. If any 10.5s were in field use, I'd think it would've been in very limited numbers. Early testing and possible limited field use aside, it'd be hard to argue that the iconic Mk18 Mod 0 and CQBR Block I has anything but a 10.3" barrel. Based on the available evidence, I can't really say I feel 10.5" is correct - even though it'd be a lot easier if it were. Based on the acknowledgments at the end of the article there is little doubt that these people knew what they were talking about. |
|
|
|
|
Posted: 4/23/2018 10:22:16 PM EDT
[#19]
Quote HistoryOriginally Posted By iNeXile556:
I would tend to agree but everyone knows the the first barrels were Colt barrels cut down by Crane. However based on the article I linked to the Crane cut Colt barrels were 10.5" and were revised to 10.3" only when Colt started supplying the short barrels. From this I would have to say that there were either 10.5" barrels fielded or that none of the original Crane cut barrels were fielded. Based on the acknowledgments at the end of the article there is little doubt that these people knew what they were talking about. Quote HistoryOriginally Posted By iNeXile556:
Originally Posted By krdt: While perhaps some 10.5" barrels (supplied by LMT) were used in early testing, I don't think anyone has ever been able to produce a photo to corroborate 10.5s being issued, or in actual field use. If any 10.5s were in field use, I'd think it would've been in very limited numbers. Early testing and possible limited field use aside, it'd be hard to argue that the iconic Mk18 Mod 0 and CQBR Block I has anything but a 10.3" barrel. Based on the available evidence, I can't really say I feel 10.5" is correct - even though it'd be a lot easier if it were. Based on the acknowledgments at the end of the article there is little doubt that these people knew what they were talking about. |
|
|
|
|
Posted: 4/23/2018 10:30:06 PM EDT
[#20]
Quote HistoryOriginally Posted By krdt:
Crane is still cutting down Colt barrels for use in CQBRs, that never stopped as far as I know. Crane cut down 10.3s are still being supplied currently as replacement barrels for CQBR URGs along with some FN SOCOM 10.3s that have appeared recently. I'm not 100% sure if new URGs come with cut downs or factory barrels, but Crane cut barrels are definitely still being supplied for replacements. Either way, you'd have to be cloning something very specific and very early to get away with a 10.5" being acceptable. Quote HistoryOriginally Posted By krdt:
Originally Posted By iNeXile556:
Originally Posted By krdt: While perhaps some 10.5" barrels (supplied by LMT) were used in early testing, I don't think anyone has ever been able to produce a photo to corroborate 10.5s being issued, or in actual field use. If any 10.5s were in field use, I'd think it would've been in very limited numbers. Early testing and possible limited field use aside, it'd be hard to argue that the iconic Mk18 Mod 0 and CQBR Block I has anything but a 10.3" barrel. Based on the available evidence, I can't really say I feel 10.5" is correct - even though it'd be a lot easier if it were. Based on the acknowledgments at the end of the article there is little doubt that these people knew what they were talking about. @Combat_Diver in your supply system can you request full CQBR URG's from CRANE as well, or is it only for the individual parts that you normally order and receive? |
|
|
|
|
Posted: 4/23/2018 11:55:26 PM EDT
[Last Edit: krdt]
[#21]
Quote HistoryOriginally Posted By MILSPEC556:
We've had pics here of URGs directly shipped straight from CRANE as received, brand new. Standard chopped 10.3 Colt govt. @Combat_Diver in your supply system can you request full CQBR URG's from CRANE as well, or is it only for the individual parts that you normally order and receive? Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By krdt:
Originally Posted By iNeXile556:
Originally Posted By krdt: While perhaps some 10.5" barrels (supplied by LMT) were used in early testing, I don't think anyone has ever been able to produce a photo to corroborate 10.5s being issued, or in actual field use. If any 10.5s were in field use, I'd think it would've been in very limited numbers. Early testing and possible limited field use aside, it'd be hard to argue that the iconic Mk18 Mod 0 and CQBR Block I has anything but a 10.3" barrel. Based on the available evidence, I can't really say I feel 10.5" is correct - even though it'd be a lot easier if it were. Based on the acknowledgments at the end of the article there is little doubt that these people knew what they were talking about. @Combat_Diver in your supply system can you request full CQBR URG's from CRANE as well, or is it only for the individual parts that you normally order and receive? 'Cept for mine, you see. My 10.5 is currently being fielded in the mountains of Arizonastan, and has been "seen in the wild" quite often. Feel free to clone away ;p. |
|
|
|
|
Posted: 4/24/2018 12:44:01 AM EDT
[#22]
|
|
|
|
|
Posted: 4/24/2018 12:47:37 AM EDT
[#23]
Quote HistoryOriginally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG
|
|
|
|
|
Posted: 4/24/2018 12:58:07 AM EDT
[#24]
Quote HistoryOriginally Posted By MILSPEC556:
Since you seem to have more lights than rifles I suppose you could dummy cord it to your ding ding and do the helicopter dick Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG 
Ding dong buzz saw! 
|
|
|
|
|
Posted: 4/24/2018 1:03:43 AM EDT
[#25]
Quote HistoryOriginally Posted By SecretSquirell:
Yeah, I have no idea why I've got so many lights.
Ding dong buzz saw! Quote HistoryOriginally Posted By SecretSquirell:
Originally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG
Ding dong buzz saw! |
|
|
|
|
Posted: 4/24/2018 1:22:33 AM EDT
[#26]
Quote HistoryOriginally Posted By MILSPEC556:
Because Surefire Weaponlights are the bees knees that's why. You could grab a rifle with the most pic rail real estate and see how many surefires fit on it. Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Originally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG
Ding dong buzz saw!
|
|
|
|
|
Posted: 4/24/2018 1:25:35 AM EDT
[#27]
Quote HistoryOriginally Posted By SecretSquirell:
Don't temp me. Working nights, Tito's to wind down with and ambien makes me do some weird shit. Quote HistoryOriginally Posted By SecretSquirell:
Originally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Originally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG
Ding dong buzz saw!
Ambien walrus makes the CQBR freaks come out at night
|
|
|
|
|
Posted: 4/24/2018 1:39:45 AM EDT
[#28]
Quote HistoryOriginally Posted By MILSPEC556:
Whatever you do, just don't try to spell squirrel.
Ambien walrus makes the CQBR freaks come out at night Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Originally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Originally Posted By MILSPEC556:
Originally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG
Ding dong buzz saw!
Ambien walrus makes the CQBR freaks come out at night
Same thing happened to me and FB. Minus the misspelled name.
|
|
|
|
IN, USA
|
Posted: 4/24/2018 1:48:49 AM EDT
[#29]
Quote HistoryOriginally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG |
|
|
|
Posted: 4/24/2018 2:00:33 AM EDT
[#30]
Quote HistoryOriginally Posted By Dyzastr:
That's a damn nice $75 dollar find. "I'd buy that for a dollar!" Quote HistoryOriginally Posted By Dyzastr:
Originally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG |
|
|
|
IN, USA
|
Posted: 4/24/2018 2:04:53 AM EDT
[Last Edit: Dyzastr]
[#31]
@milspec556, I think I figured out what happened to this guys handgurd mount up system. I think this is what happens when you have an ris ii mounting bracket behind the barrel nut, and try to force a dd lite rail to fit. I have an o.g. Dd lite rail, and thought I could just slip it off and install the ris ii.... Nope. They don't line up
. Almost cross threaded/ stripped out the mount. The top four bolts lined up, but the bottom was off. Made me wonder if the same thing happened here, just vice versa. So I guess the lesson is, if it didn't come with the rail, don't try to mount it? Although it appears to be working for him.
Eta: I'm glad the dd lite fsp that was in the EE finally sold. I do not need another rail/ build. eta #2: is that a sf mini on the end of his muzzle? |
|
|
|
Posted: 4/24/2018 2:10:19 AM EDT
[#32]
Quote HistoryOriginally Posted By Dyzastr:
@milspec556, I think I figured out what happened to this guys handgurd mount up system. I think this is what happens when you have an ris ii mounting bracket behind the barrel nut, and try to force a dd lite rail to fit. I have an o.g. Dd lite rail, and thought I could just slip it off and install the ris ii.... Nope. They don't line up . Almost cross threaded/ stripped out the mount. The top four bolts lined up, but the bottom was off. Made me wonder if the same thing happened here, just vice versa. So I guess the lesson is, if it didn't come with the rail, don't try to mount it? Although it appears to be working for him.
http://i.imgur.com/pSjm4Fb.jpg Eta: I'm glad the dd lite fsp that was in the EE finally sold. I do not need another rail/ build. eta #2: is that a sf mini on the end of his muzzle?
Now we just need to get ya on the cure for cancer! |
|
|
|
IN, USA
|
Posted: 4/24/2018 2:13:25 AM EDT
[#33]
Quote HistoryOriginally Posted By SecretSquirell:
I thought so too. Quote HistoryOriginally Posted By SecretSquirell:
Originally Posted By Dyzastr:
Originally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG |
|
|
IN, USA
|
Posted: 4/24/2018 2:18:44 AM EDT
[Last Edit: Dyzastr]
[#34]
Quote HistoryOriginally Posted By MILSPEC556:
I'll be damned. The unanswerable has been answered. Good work.
Now we just need to get ya on the cure for cancer! Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By Dyzastr:
@milspec556, I think I figured out what happened to this guys handgurd mount up system. I think this is what happens when you have an ris ii mounting bracket behind the barrel nut, and try to force a dd lite rail to fit. I have an o.g. Dd lite rail, and thought I could just slip it off and install the ris ii.... Nope. They don't line up . Almost cross threaded/ stripped out the mount. The top four bolts lined up, but the bottom was off. Made me wonder if the same thing happened here, just vice versa. So I guess the lesson is, if it didn't come with the rail, don't try to mount it? Although it appears to be working for him.
http://i.imgur.com/pSjm4Fb.jpg Eta: I'm glad the dd lite fsp that was in the EE finally sold. I do not need another rail/ build. eta #2: is that a sf mini on the end of his muzzle?
Now we just need to get ya on the cure for cancer! )
edit it to correct grammar
|
|
|
|
Posted: 4/24/2018 2:33:23 AM EDT
[#35]
Quote HistoryOriginally Posted By Dyzastr:
I noticed we both have a first gen m951. The one with the older mounting bracket. Mine has the sw02 tailcap, but I do have one of the tail caps that yours appears to have. I don't think I'll ever sell that one. Quote HistoryOriginally Posted By Dyzastr:
Originally Posted By SecretSquirell:
Originally Posted By Dyzastr:
Originally Posted By SecretSquirell:
Don't know what I'm going to use it on, but it just showed up today. https://www.AR15.Com/media/mediaFiles/204916/20180423_234029-524175.JPG
|
|
|
|
IN, USA
|
Posted: 4/24/2018 2:46:01 AM EDT
[Last Edit: Dyzastr]
[#36]
Quote HistoryOriginally Posted By SecretSquirell:
I don't even know half of what lights I've got. I see one I like, buy it, play with it for a while, then toss it in the pile. . I'm the same way with lights. I told myself to sell some b4 getting anymore, but that hasn't really been workin for me.
Here's the one 
|
|
|
|
Posted: 4/24/2018 3:02:54 AM EDT
[#37]
Quote HistoryOriginally Posted By Dyzastr:
I meant to say, I'll take that ugly beat up silver one off your hands . I'm the same way with lights. I told myself to sell some b4 getting anymore, but that hasn't really been workin for me.Quote HistoryOriginally Posted By Dyzastr:
Originally Posted By SecretSquirell:
I don't even know half of what lights I've got. I see one I like, buy it, play with it for a while, then toss it in the pile. . I'm the same way with lights. I told myself to sell some b4 getting anymore, but that hasn't really been workin for me.
|
|
|
|
IN, USA
|
Posted: 4/24/2018 3:32:24 AM EDT
[Last Edit: Dyzastr]
[#38]
Just found a ti-7 pic. I recently got one for a friend, and I mounted on my cqbr, and it's great. The rounded heel of the buttstock feels great when shooting heads up. I'm likin em more and more. Plus the placement of the adjustment lever is nice, and to take the stock completely off, you just pull the lever the opposite way. Easiest one I know of to remove.
Eta: check that finger placement. |
|
|
|
Posted: 4/24/2018 12:00:27 PM EDT
[#39]
Quote HistoryOriginally Posted By Dyzastr:
Just found a ti-7 pic. I recently got one for a friend, and I mounted on my cqbr, and it's great. The rounded heel of the buttstock feels great when shooting heads up. I'm likin em more and more. Plus the placement of the adjustment lever is nice, and to take the stock completely off, you just pull the lever the opposite way. Easiest one I know of to remove. http://i.imgur.com/23v2HeU.jpg Eta: check that finger placement. |
|
|
|
OK, USA
|
Posted: 4/24/2018 2:27:11 PM EDT
[#40]
B5 Gen 1 Sopmods are back in stock at Brownells.
|
|
|
|
Posted: 4/24/2018 4:23:42 PM EDT
[#41]
Ok.....flame away.....blade stays on for another 5-6 months...
|
|
|
|
|
Posted: 4/24/2018 4:25:29 PM EDT
[#42]
Quote HistoryOriginally Posted By Steinhatchee:
Ok.....flame away.....blade stays on for another 5-6 months...
https://i.imgur.com/Jteqmbc.jpg
Nice CQBR bud |
|
|
|
|
Posted: 4/24/2018 4:30:38 PM EDT
[Last Edit: Steinhatchee]
[#43]
Quote HistoryOriginally Posted By MILSPEC556:
Tried to find something to flame about. Couldn't find it. Cept maybe the Aimpoint.
Nice CQBR bud
|
|
|
|
|
Posted: 4/24/2018 4:46:26 PM EDT
[#44]
Quote HistoryOriginally Posted By pbjunkiee:
Chop that front grip Quote HistoryOriginally Posted By pbjunkiee:
Originally Posted By tifosi:
My Mod 0 work in progress... Yeah, yeah, I know, ARMS mount, I just don't have a Wilcox yet, and I'll probably be switching the upper to Colt some time this year. https://www.AR15.Com/media/mediaFiles/78310/20180419_163929-519894.JPG I did mine the other night, still needs some work but I like it so far. I know the rifle doesn't fit the thread so please don't flame me to hard.
 Attached File |
|
|
|
|
Posted: 4/24/2018 5:18:13 PM EDT
[#45]
Quote HistoryOriginally Posted By NicoG: Chopped KAC vert grip you say? I did mine the other night, still needs some work but I like it so far. I know the rifle doesn't fit the thread so please don't flame me to hard.
https://www.AR15.Com/media/mediaFiles/361826/20180424_144110-524612.JPG |
|
|
|
|
Posted: 4/24/2018 5:36:17 PM EDT
[#46]
Quote HistoryOriginally Posted By Steinhatchee:
Ok.....flame away.....blade stays on for another 5-6 months...
https://i.imgur.com/Jteqmbc.jpg Great stick, thanks for sharing! |
|
|
|
IN, USA
|
Posted: 4/24/2018 5:45:43 PM EDT
[#47]
Quote HistoryOriginally Posted By Steinhatchee: Thanks milspec! I was worried due to the blade and black PEQ15....pic thread.
https://i.imgur.com/W3GuFWh.jpg The guy I bought it from said its Fde, but I honestly can't tell. And I didn't realize the invisible ones cost almost twice as much as a visible one. Somethin to do with extremely limited runs.
|
|
|
CA, USA
|
Posted: 4/24/2018 5:52:59 PM EDT
[Last Edit: Nighthawk98TJ]
[#48]
I have tried searching high and low for some rough numbers here for a comparison I'm doing but strangely found nothing. So, could a couple of you chime in with your rough unloaded weights of your Mk18 CQBR rifles that are fully outfitted with optics, IR laser, suppressor, etc.? I realize there are an infinite number of variables here, but I'm looking for a rough approximation. Thanks!
|
|
|
TX, USA
|
Posted: 4/24/2018 5:53:38 PM EDT
[#49]
Quote HistoryOriginally Posted By Dyzastr:
Just found a ti-7 pic. I recently got one for a friend, and I mounted on my cqbr, and it's great. The rounded heel of the buttstock feels great when shooting heads up. I'm likin em more and more. Plus the placement of the adjustment lever is nice, and to take the stock completely off, you just pull the lever the opposite way. Easiest one I know of to remove. http://i.imgur.com/23v2HeU.jpg Eta: check that finger placement.
|
|
|
|
Posted: 4/24/2018 5:55:52 PM EDT
[#50]
Quote HistoryOriginally Posted By Steinhatchee:
Thanks milspec! I was worried due to the blade and black PEQ15....pic thread.
https://i.imgur.com/W3GuFWh.jpg Quote HistoryOriginally Posted By Steinhatchee:
Originally Posted By MILSPEC556:
Tried to find something to flame about. Couldn't find it. Cept maybe the Aimpoint.
Nice CQBR bud
https://i.imgur.com/W3GuFWh.jpg @SecretSquirell and @DontBuryMe the wait is finally over, my baby is home
Its not often at all MILSPEC gets a new gun so needed to share it with my CQBR brethren 
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
